ZAPCO Z-BR II Dash Remote Owner’s Manual
- June 15, 2024
- ZAPCO
Table of Contents
Z-BR II
Owner’s Manual
Before operating the unit, please read this manual throughly and retain it for future reference.
The Zapco Z-BR II Dash Remote
An accessory remote level control for the following Zapco Amps: Z-II Series,
Z-SP Series
The Zapco Z-BR II adds new versatility to let you find the best looking and
most convenient mounting for your new remote. You can mount the Z-BR II under
dash with the solid metal housing or you can disassemble the housing to remove
the bare pot for in-dash mounting.
If you remove the 2 screws from the housing it will slide back and off the
remote leaving just the remote and top bracket. Then remove the knob and you
can take the bare remote out of the bracket for mounting in a dash or other
convenient panel. We have included two knobs with the Z-BR II. The 20 mm knob
is included to match the size, look and feel of the volume control of most
common head units.
The 13 mm knob is useful in a crowded dash where finger clearance is needed.
It also provides more clearance when mounting the remote under the dash.
Cross section of the Z-BR II shows:
- Front remote bracket
- Removable rear housing
- Screws that release the housing
For mounting in
a dash or other panel you must drill a 5/16 hole for the shaft of the Remote.
The two sets of Nuts and washers allow the Z-BR II to be mounted in panels of
different thickness.
Modesto, California USA
Since 1974
zapco.com
Documents / Resources
|
ZAPCO Z-BR II Dash
Remote
[pdf] Owner's Manual
Z-II Series, Z-SP Series, Z-BR II, Z-BR II Dash Remote, Dash Remote, Remote
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>