SBS TEJZEARHOOX2BTWTWS Wireless Earphones With Hd Microphone User Manual
- June 15, 2024
- sbs
Table of Contents
SBS TEJZEARHOOX2BTWTWS Wireless Earphones With Hd Microphone
INTRODUCTION
Power and
pairing
Charging the earbuds
Insert the earbuds into the charging case, the LED will light up. When
charging is complete, it will turn off.
Charging the case
Charging via cable Plug the Type C connector of the supplied cable into the
Type C port on the case and the other end into a USB port. The LED on the case
will flash and remain steady when charging is complete.
Turning on the earbuds
Take the earbuds out of the charging case, they will automatically turn on and
pair with each other. Or press both MLF buttons on the earbuds for 5 seconds.
Turning off the earbuds
When you put the TWS earphones into the case, they will turn off
automatically. Alternatively, press the MLF button on one of the earbuds for 5
seconds.
Pairing with devices
- Take the earbuds out of the charging case: they will turn on and pair with each other automatically.
- Turn on Bluetooth on the device and search for “JAZ HOOX 3.0” in the list of available devices, then select it
- After the first pairing with the device (if Bluetooth is turned on), the earbuds will automatically pair every time they are taken out of the case.
Functions of the MFB
ACTION
| COMMAND|
KEY
---|---|---
Play/pause music| 1 tap| Left/ right
Voice assi stant| 3 taps| Left/ right
Previous track| 2 seconds| Left
Next track| 2 seconds| Righi
Answer a call| 1 tap| Left/ right
Enda call| 1 tap| Left I right
Reject a call| 2 seconds| Left I right
Recall last number| 2 taps| Left/ right