TEVII WMU3030M SmartShare 4K Pro Wireless Presentation and Collaboration System User Guide

TEVII WMU3030M SmartShare 4K Pro Wireless Presentation and Collaboration

System

Product Information

Product Features:

the button to start streaming.
App Free one Wireless Camera| No software or app installation is required. No setup or IT team
needed. Supports iOS/Android/Windows system, Blu-ray DVD player,
media player, and any devices with HDMI jack. Allows the sharing of
images and audio from a smartphone camera to a large display
simultaneously.
Multi-user mode| Allows up to 16 users’ presentations at one time.
Auto Channel Selection| The SmartShare 4K Pro will automatically select the best Wi-Fi
channel after power on to ensure smooth streaming.
Fast Speed with 5G AC MIMO Technology| The SmartShare 4K Pro comes with fast 802.11ac MIMO technology,
which increases Wi-Fi speeds by allowing simultaneous transmission
or reception of multiple data streams.
4K60 High Resolution| Supports 4K high resolution for more clear pictures, rich in
details and texture compared to 1080p.
High-Security Protection| Supports AES 128-bit security encryption and
WPA2/WPA-PSK/WPA2-PSK authentication protocol to protect data. HDCP
supported to protect the content.

Package Included:

• Transmitter x1
• Receiver x1
• Type C cable x2
• HDMI extended cable x1

Product Specification:

Weight Temperature Range Operating: Storage: Humidity Operating:
Storage:
Overview TX| HDMI out jack x1, Type C x1, button x1 Blue DC5V/1 A About 3W
83x32x13mm 10% to 80% relative humidity 5% to 90% relative
humidity

Product Usage Instructions

1. Connect the HDMI jack of the transmitter to the HDMI port of the source devices.
2. Click the button on the transmitter to cast.
3. The LED on the transmitter will display different states.
4. To power on, short press the button for 0.5s.
5. To power off, long press the button for 5s.
6. To quickly click the button, press it once.
7. If needed, use the Type C port for the power supply.
8. If the video source’s HDMI has 5V output, the transmitter can support up to 4 hours of playback. If not, the built-in battery can support 50 minutes of playback. To charge the battery, place the transmitter into the cradle.

Introduction

• SmartShare 4K Pro is an intuitive and high-efficiency 4K wireless presentation and collaboration system that enables any meeting participant to simply share the content from their laptop, mobile phone, or tablet on the projector or large screen wirelessly, no
• APP required, no setup, no messy cables, just click and share. SmartShare 4K Pro supports up to 16 presenters to share their content instantly without wasting valuable meeting time.
• A standard SmartShare 4K Pro is a combination of one transmitter and one receiver, the receiver is connected to a projector or display, and the transmitters are connected to a PC or any device with an HDMI jack, after connected, users click the button on the transmitter and the screen will be streaming to the display, it’s easy for other users to switch by click. You can buy an additional transmitter or receiver if needed.
• Never have to worry about the software configuration, no compatibility, WIFI, and network setup, and no need for IT support, with our powerful and simple solution, everyone can immediately know how to use it for collaborative presentations, which significantly improves corporate efficiency and productivity.

Product Features

click the button to start the streaming.
App Free| SmartShare 4K Pro doesn’t need any software or app installation, no setup, no IT team.
All in one| Support iOS/Android/Windows systems, support Blu-ray DVD player, media player, and any devices with HDMI jack.
Wireless Camera| Share the images and audio from the smartphone camera or to the large display simultaneously.
Multi-user mode| Up to 16 user’s presentation at one time
Auto Channel Selection| The SmartShare 4K Pro will select the best Wi-Fi channel automatically after powering on to ensure streaming smoothly.
Fast Speed with 5G AC MIMO Technology| The SmartShare 4K Pro comes with the fast 802.11ac MIMO technology

which increases Wi-Fi speeds by allowing a pair of wireless devices to simultaneously send or receive multiple data streams.

4K60 High-Resolution Quality| SmartShare 4K Pro supports 4K high resolution, which means much clearer pictures, rich in details and texture compared with 1080p.
High-Security Protection| No worries about the data security, the SmartShare 4K Pro supports AES 128-bit security encryption and WPA2/WPA- PSK/WPA2-PSK authentication protocol to protect data. HDCP supports to protection of the content.

Package Included

Devices Requirement

Please ensure the devices meet the following requirements:

• iOS 9.0 or above
• Android 5.0 or above

Product Specification

Feature|
---|---
Video input| Up to 4K30
Video output| Up to 4K60
Audio| Stereo, quality 16bits 48KHz
Wireless Channel| IEEE 802.11ac, 5GHz, 2T2R
Latency| About 100ms latency
Streaming Protocol| Airplay, Miracast, DLNA
HDMI Version| HDMI2.0
Authentication Protocol| WPA2 (WPAS-PSK / WPA2-Enterprise)
Security| AES 128 bit
Platform supported| Windows, iOS, Android system, Any devices with HDMI jack
Distance| About 50 meters in the clean line of sight
Transmitter|
interface| HDMI in jack x 1, Type c x 1, button x 1
LED| Red and blue
Switch button| x 1
Power supply| DC5V/0.7A
Battery capacity| 780mA Polymer battery
Power Consumption| About 3.5 W
Dimension| 83x32x13mm
Feature|
---|---
Video input| Up to 4K30
Video output| Up to 4K60
Audio| Stereo, quality 16bits 48KHz
Wireless Channel| IEEE 802.11ac, 5GHz, 2T2R
Latency| About 100ms latency
Streaming Protocol| Airplay, Miracast, DLNA
HDMI Version| HDMI2.0
Authentication Protocol| WPA2 (WPAS-PSK / WPA2-Enterprise)
Security| AES 128 bit
Platform supported| Windows, iOS, Android system, Any devices with HDMI jack
Distance| About 50 meters in the clean line of sight
Transmitter|
interface| HDMI in jack x 1, Type c x 1, button x 1
LED| Red and blue
Switch button| x 1
Power supply| DC5V/0.7A
Battery capacity| 780mA Polymer battery
Power Consumption| About 3.5 W
Dimension| 83x32x13mm

Overview

1. HDMI in: connect with the HDMI port of the source devices.
2. Button: click to cast
3. LED: to display different statues.

1. Reset: press the button up to 3s for a factory reset
2. Type C: for power supply.

TX Playback time:

1. Some video sources’ HDMI has 5V output, which ensures TX up to 4 hours of playback.
2. If the video source’s HDMI has no power output, the built-in battery of the TX can support 50 minutes of playback.

If the battery is running out, please place the TX into the cradle for charging.

LED indicator of the SmartShare 4K Pro TX

1. HDMI out: connect with monitor or projector.
2. Button: Long press 9s for factory reset
3. LED: to display different statues.
4. Type C : for power supply.

LED indicator of the SmartShare 4K Pro

RX

| Description
---|---
Flashing blue| Waiting for connection
Static Blue| Connected and started presenting

Receiver Installation

1. Connect the RX with the HDMI port of the display.
2. Connect the type c port of RX to the TV USB port through the USB cable for power supply.

Remark: the power supply of RX is about 5V/0.5A. Please connect the RX with a power adapter if your TV can’t supply enough power.

Connect to the Internet:

• Connect the RX SSID with your smart devices, the SSID and password are shown in the left upper corner of the screen.
• Open the browser with your phone, and input the IP address that shows on the right upper corner of the screen to enter the RX management platform.
• Remark: when connected to the router, the IP address will be updated accordingly.
• Select the network and connect to the management platform, the RX will link to the network and show the network SSID in the middle of the screen. (to get better performance, we recommend connecting with a 5G router)
• Select the network and connect to the management platform, the RX will link to the network and show the network SSID on the middle of the screen. (to get better performance, we recommend connecting with a 5G router)
• AP password management: The user can change the AP password on the management page.
• Remark: if the password is changed, the TX and RX have to pair again.

Language

• Users can change the language on the management page:

Screen Position

• If the RX HDMI OUT size is not compatible with the display, the user can use Screen Position to adjust the zoom-in and zoom-out of the screen.
• Airplay mode: you can select to use streaming mode or Mira mode.

Pairing a transmitter and receiver

• A standard SmartShare 4K Pro set includes one receiver and one transmitter, which are paired before shipment. Normally you don’t need to pair them again.
• However, if you buy an additional transmitter or upgrade to new software, you need to follow the instructions below to pair the new transmitter with the receiver.

Pairing instruction:

1. Power on the receiver connect with the display and wait for RX to enter the home page.
2. Power on the TX and wait around 5-10seconds, the button light of the TX will turn to flash red, Then hold the reset button for up to 3 seconds till the button flashes fast for factory reset, then the TX will restart and the LED light will turn from red to flashing blue after 30s automatically.
3. Click the TX button to stream when the TX LED is turning to flash blue.

Stream from TX

SmartShare 4K Pro TX Installation

1. Connect the SmartShare 4K Pro TX’s HDMI to the PC HDMI port.
2. The LED indicator of the SmartShare 4K Pro TX will turn red when it’s booting up.
3. The LED indicator will become blue and flash when SmartShare 4K Pro is ready to stream.
4. Click the button to start casting, the LED indicator will become constant blue.

Streaming from smart devices:

1. iOS devices
   • Search RX SSID and connect. (SSID: RXxxxxx, Password: 12345678), the SSID is shown on the left upper corner of the screen.
   • Remark: if the RX is already connected to your network, just make sure your device is in the same network with RX.
   • Stream the content from your iOS devices via Airplay.

Android devices

• make sure your android device’s Wi-Fi is available, and select the miracast function of your phone and start to stream.
• Remark: there are different name on difference brand phones or tablets: WIFI Display, WLAN Display, Wireless Display, Allshare Display, Allshare Cast, Wireless Display

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:

• The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Specific Absorption Rate (SAR) information:

• This radio is designed for and classified as “General population/uncontrolled Use”, the guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The exposure standard for wireless radio employs a unit of measurement known as the Specific Absorption Rate or SAR, with the SAR limit set at 1.6W/kg.
• Body-worn operation; this device was tested for typical body-worn operations with the Down of the Transmitter kept at 0mm for body-worn. To maintain compliance with RF exposure requirements, use accessories that maintain a 0mm for body-worn. The use of belt clips, holsters, and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with RF exposure requirements and should be avoided.
• The highest reported SAR value for worn on the body is 0.444W/kg and Simultaneous SAR is 0.862 W/kg

RX: FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
The UNII Band 5150-5250MHz indoor use only.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>