MakeID P1 Label Printer User Manual

Label Printer-P1
User Manuel to Label Printer-P1

Packaging List

1 Printer-P1
1 USB Cable
1 Power Adapter
1 User Manual
1 Quick-Start Guide
1 Type-C Adapter
1 * Label Roll

Please go to https://www.makeid.com/jj/download/pceditor/ to download the software.

Printer Button

Indicator Light
Power On/Off
Cover Open
Power Port

Cover Open : Push the button to open the topside cover. When the cover is open, the print head will lift up.
Power On/Off : To power on or off the printer.
self-check button ：Print self-check content

Power On the Printer

Step 1: Connect the power cable to the power adapter. Then, plug it into the power port that locates on the back of the printer before plugging the other end into the electric socket.
Step 2: Plug one end of USB cable into the USB port that locates on the back of the printer and the other end to PC. If you use a Mac, the included type-c adapter is needed to use.
Step 3: Power on the printer.

Installation of Label Roll

CAUTION⚠️: Only genuine MakeID labels can be used in this printer. Genuine MakeID labels can be detected by label recognition function, which allows MakeID PC editor software to receive label information, such as what type of label is being used by the  printer.

Step 1: Take out the label roll.

Step 2: Open the topside cover.

Step 3: Push aside the label clippers and put in the label roll with the printable side facing up.

Step 4: To hold the label roll in place, please ensure that the clipper tabs are threaded through the center of the roll.

Step 5: Pull the label out to the exit.

⚠️：CAUTION⚠️:

The printable side facing up.
Pull the label out to the exit.
To hold the label roll in place, please ensure that the clipper tabs are threaded through the center of the roll.

Use of Printing Software

Step 1: Please ensure that the previous steps are completed correctly in accordance with the user manual.
Step 2: Please go to https://www.makeid.com to download and install the latest version of \MakeID label printer software that is exclusively designed for desktop PC.

Step 3: Double click the software installation package, then follow the installation guide to complete the installation of the desktop printing software.

Step 4: Edit your text.

Step 5: Print out the label.

Printer Parameter

Printing Method: Thermal Printing
Resolution: 203DPI
Print Speed: 100mm/s Max.
Label Mark Detection: Photoelectric Sensor
Communication Port: USB (standard)
Label Roll Outer Diameter: 100mm Max.
Label Roll Inner Diameter: Standard 25.4mm
Input: DC 24V= 2.5A
Printhead Life: ≥30km
Working Condition: 5~35℃,20-90%RH (frost-free)
Storage Condition: -40℃~55℃，≤93%RH (40℃)
Printer Size: 212102143mm
Net Weight: About 1078g
Size with Package: 247181154mm
Gross Weight: About 2075g

Malfunction Indication

accordance with the user manual.
Loose topside cover| Please ensure the cover is securely
shut.
No label found or label
incorrectly installed| Put in the label and ensure it is
correctly installed between the clippers.
Non-genuine label installed| Printer cannot recognize the
non-genuine label, and even worse, it
may cause harm to the printer. So,
please ensure to use the genuine label.
Indicator flashing red| Indicator flashing red| Indicator flashing red

Precaution

Do not disassemble the printer or power adapter to avoid possible electrocution, mechanical injury, or causing damage to the printer components and other accidents.
Unplug the printer immediately to avoid burns if the printer or power adapter shows abnormalities such as emitting smoke, odor etc.
Do not touch the print head to avoid burns after continuous printings or printing operations just finished when the print head is still in a high- temperature state.
Do not use poor-quality labels (non-genuine labels) as this may cause damage to the print head and shorten its life. Damages to the print head caused by the use of poor-quality labels are not covered by the warranty.
Do not touch the print head or electronic components to prevent static electricity from causing damage to sensitive components.
Leave the printer unplugged if it will not be used for a long period of time.
Do not press or hit the printer as this may cause damages to the components, or the printer malfunctions.
If the printer is soaked in water or damaged, stop using it and have it repaired immediately.
It is recommended to use the printer at a temperature of 5°C ~ 35°C, humidity 20% ~ 90% to ensure a good printing effect and prevent the print head from being burnt. Also, if there is a large temperature difference between indoors and outdoors, it is not  recommended to use it immediately when it is taken indoors from the outdoors, but leave it for a certain period of time to ensure the printer is frost free before using.
As the print head is a precision component, and to better protect the print head and extend its life, it is recommended not to print more than 2 meters for one single continuous printing with a total printing length no more than 150 meters per day.

Safety Instruction

1. Safety Warning
   Please read the following precautions with attention before using the printer.
   ⚠️WARNING: Do not touch the print head or its surrounding components during or just after printing, as the print head is a heat-generating component.
   ⚠️WARNING: Do not touch the print head surface or the connection plug-ins to avoid causing damage to the print head due to static electricity.

2. Precaution
   The printer should be installed in a flat and stable place.
   Adequate space around the printer should be considered for further operation and maintenance. The printer should be kept away from water sources.
   Do not use or store the printer in high-temperature and high-humidity environments, or heavily polluted areas. Also, the printer should be kept away from direct sunlight, bright lights and heat sources. It is recommended not to place the printer in areas  subject to vibration and shock.
   Dews due to humid air on the printer surface should be avoided, and if dews have already been formed, do not power on the printer until they have disappeared completely.
   Connect the printer’s power adapter to a properly grounded outlet. Using the same outlet with large motors or other devices that might cause fluctuations in supply voltage should be avoided.
   Avoid water or conductive materials (e.g., metals) from entering the printer. If this happens, power off the printer immediately.
   The printer must not be operated without labels, otherwise the roller and print head will be seriously damaged.
   Please ensure to power off the printer when connecting or disconnecting each port, otherwise it might cause damage to the printer control circuits.
   Do not self-disassemble the printer for maintenance or repair.
   Please keep the manual for your reference.

Precaution when Using Power Adapter

Do not use damaged or worn-out cables as they might cause electrocution or fires.
Do not touch the power adapter, power plug or power output with wet hands as it might cause electrocution.
Do not over bend or forcefully pull the power cable, nor place any heavy objects on it, as this may damage the cable and cause electrocution or fires.
Hold the plug part and do not pull the cable part when unplugging the printer, otherwise it may damage the cable and cause electrocution or fires.
Please use the original MakeID power adapter. The use of a non-original adapter may result in burnout of the printer or cause injury to the operator. Such burnout and injury caused by the use of non-original adapters are not covered by the warranty, and the  manufacturer and seller shall not bear the responsibility.
Keep the power adapter away from children to avoid danger.
Printer must be powered off when under maintenance or repair to avoid danger.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause  undesired operation.

Warranty

MakeID 一We provide a one-year warranty
MakeID provides you with free repair services due to quality and function issues within a one-year since your purchase.

1. Order number, contact information and delivery details which shall include your name, phone number and full address are needed for repairing or replacing your product under warranty.
2. Product returned to MakeID needs to be fully packaged. MakeID is not responsible for the loss of or damage to the product by the customer during shipping.
3. Product must be operated in strict accordance with the provided operating instruction. MakeID is not responsible for problems caused by accidents, misuse, modification or negligence.
4. MakeID label printer is exclusively designed for the use of MakeID labels. Malfunctions of or damages to the printer caused by the use of other manufacturer’s labels are not covered by the warranty.
5. This warranty does not affect your legal rights as a consumer.

User Name|
---|---
User Contact|
Date of Purchase|
Module No.|
Series No.|
Factory Test| Passed

Back Cover

MakeID
Chongqing Jingranyouxu Technology Co.,Ltd
Web:WWW.MakeID.COM

FCC CAUTION:
§ 15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause  undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This  equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a  particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following  measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

References

• MakeID 标记万物 感知世界
• MakeID 标记万物 感知世界
• MakeID
• MakeID

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>