behringer HA8000 V2 8 Channel Headphone Mixing Distribution Amplifier User Guide

behringer HA8000 V2 8 Channel Headphone Mixing Distribution Amplifier

Product Information

The POWERPLAY HA8000/HA6000 is a high-power headphone mixing and distribution amplifier. It is available in both 8-channel (HA8000) and 6-channel (HA6000) versions. The amplifier is designed to provide powerful and clear audio output to multiple headphones simultaneously. It is equipped with various safety features to ensure user protection and optimal performance.

Product Usage Instructions

1. Read the user manual carefully before using the amplifier.
2. Ensure that the amplifier is placed in a well-ventilated area and not exposed to rain, moisture, or direct sunlight.
3. Do not remove the top cover or rear section of the amplifier. There are no user-serviceable parts inside, so any servicing should be done by qualified personnel.
4. Clean the amplifier only with a dry cloth. Do not use any liquid or cleaning agents.
5. Ensure that the ventilation openings of the amplifier are not blocked. Follow the manufacturer’s instructions for proper installation.
6. Avoid placing the amplifier near heat sources such as radiators, heat registers, stoves, or other devices that generate heat.
7. Do not use the amplifier near water or in wet conditions.
8. Protect the power cord from being pinched or walked on, especially at the plugs and where it exits from the amplifier.
9. Use only attachments and accessories specified by the manufacturer.
10. If the provided plug does not fit into your outlet, consult an electrician to replace the obsolete outlet. Do not modify the plug in any way.
11. When using a cart, stand, tripod, bracket, or table with the amplifier, exercise caution to avoid tip-over injuries.
12. Unplug the amplifier during lightning storms or when it is not in use for an extended period of time.
13. If the amplifier is damaged, exposed to rain or moisture, or does not operate normally, refer to qualified service personnel for repairs.
14. Ensure that the amplifier is connected to a main socket outlet with a protective earthing connection.
15. If a mains plug or appliance coupler is used as the disconnect device, it should remain easily operable.
16. Avoid installing the amplifier in confined spaces such as bookcases or similar units.

Important Safety Instructions

Terminals marked with this symbol carry an electrical current of sufficient magnitude to constitute a risk of electric shock. Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installations or modifications should be performed only by qualified personnel. This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.

• Caution
  To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user-serviceable parts inside. Refer servicing to qualified personnel.

• Caution
  To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.

• Caution
  These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Use only attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
17. Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office or your household waste collection service.
18. Do not install in a confined space, such as a bookcase or similar unit.
19. Do not place naked flame sources, such as lighted candles, on the apparatus.
20. Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed of at a battery collection point.
21. This apparatus may be used in tropical and moderate climates up to 45°C.

LEGAL DISCLAIMER

• Music Tribe accepts no liability for any loss that may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice.
• All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones and Coolaudio are trademarks or registered trademarks of Music
• Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2022 All rights reserved.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at community.musictribe.com/pages/support#warranty.

POWERPLAY

POWERPLAY HA8000/HA6000 Hook–up

1. Step 1: Hook–Up
   • HA6000 headphone distribution
   • HA8000 in a recording studio environment

POWERPLAY HA8000/HA6000 Controls

Step 2: Controls

1. The MAIN METER displays the input level of the MAIN INPUT connector(s) and the DIRECT IN connector on the HA6000. When the HA8000 is powered on, the green ON LED will light up.
2. The MASTER LEVEL knob(s) adjust the level of the MAIN INPUT signal. The HA8000 has individual knobs called MAIN IN 1 and 2 which control the 2 pairs of MAIN IN jacks.
3. The DIRECT IN jack (HA6000 only) allows stereo signals to be connected via ¼” TRS cable.
4. The PHONES OUT jacks allow headphones to be connected to each channel for individual monitoring.
5. The CHANNEL METER displays the output level of each individual channel.
6. The OUTPUT LEVEL knob adjusts the channel’s volume.
7. The IN 1/IN 2 button (HA8000 only) selects whether the MAIN IN 1 or 2 signal is sent to that channel.
8. (Engage the HA8000’s MONO button to convert the channel’s signal to mono.
9. The L/R MONO buttons allow the HA6000’s input signal to be heard in mono.
10. The HA6000’s BALANCE knob adjusts the ratio between the MAIN/DIRECT IN signals and the AUX IN. If nothing is connected to the channel’s AUX IN jack, then the BALANCE knob controls the stereo balance of the MAIN signal.
11. The BASS knob adjusts the channel’s low frequencies (HA6000 only).
12. The TREBLE knob adjusts the channel’s high frequencies (HA6000 only).
13. The POWER button turns the unit on and off.
14. The MAIN INPUT connectors allow source audio to be sent to all channels. The HA6000 accepts a single stereo signal via ¼” or XLR jacks. The HA8000 has a pair of ¼” stereo inputs, and each set has its own volume control. Note that the MAIN signal is muted for channels with a cable connected to the DIRECT IN jack.
15. The MAIN OUT connectors (HA6000 only) send the signal from the MAIN INPUT jacks directly out via ¼” or XLR.
16. An extra PHONES OUT jack is available on the rear panel of the HA8000.
17. The DIRECT INPUT jacks on the accept signals via ¼” cables. When a connection is made to this jack, the MAIN INPUTS are muted in the respective channel.
18. The AUX IN jacks on the HA6000 accept signals via ¼” cables. The signal can be mixed with the MAIN IN signal via the channel’s BALANCE knob. If a ¼” TS cable is used to connect to the AUX IN jack, it is recommended to press the channel’s MONO button so that the signal is heard in both ears.
19. The OUT jacks on the HA6000 echo the front panel PHONES OUT jacks.

Specifications

Important information

1. Register online. Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
2. Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under “Support” at musictribe.com.  Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product.
3. Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.

COMMISSION COMPLIANCE INFORMATION

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

• Behringer
  • POWERPLAY HA8000/HA6000
• Responsible Party Name: Music Tribe Commercial NV Inc.
• Address: 122 E. 42nd St.1,
• 8th Floor NY, NY 10168,
• United States
• Email Address: legal@musictribe.com.

POWERPLAY HA8000/HA6000

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Important information: Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.

• Hereby, Music Tribe declares that this product is in compliance with Directive
• 2014/35/EU, Directive 2014/30/EU, Directive 2011/65/EU and Amendment
• 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive
• 1907/2006/EC.
• Full text of EU DoC is available at https://community.musictribe.com/.
• EU Representative: Music Tribe Brands DK A/S
• Address: Gammel Strand 44, DK-1202 København K, Denmark
• UK Representative: Music Tribe Brands UK Ltd.
• Address: 6 Lloyds Avenue, Unit 4CL London EC3N 3AX, United Kingdom
• We Hear You

8/6-Channel High-Power Headphones Mixing and Distribution Amplifier

References

• Music Tribe
• Music Tribe
• Music Tribe
• Music Tribe
• Music Tribe

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>