AmScope TCS-200 Microscope Stage Precise Temperature Control Slide Warmer Instructions
- June 15, 2024
- AmScope
Table of Contents
TCS-200 Microscope Stage Precise Temperature Control Slide
Warmer
Instructions
TCS-200 Microscope Stage Precise Temperature Control Slide Warmer
Before using the Stage Warmer, please read the following:
**Important data:
**
2 LED digital displays and 2 touch pad buttons on temperature controller
Power input: 110V/220
Power output: 50W
Preset temperature control range: 15º C to 55º C
Actual stage temperature: Room to 52º C
Temperature setting increments: 0.1º C
Temperature display divisions: 0.1º C
Variability between setting and displaying temperature: less than +/-1º C
Dimensions of stage warmer plate: 152mm x 134mm x 3.2mm
Dimensions of control unit: 205mm x 150mm x 75mm
Stage can reach max temperature in under 10 minutes.
How to use:
a) Before use, remove all components from the packaging.
b) Plug the heated stage and power cord into the back of the temperature
control system.
c) Remove the stage clips/caliper from your microscope. Peel the protectors
off of the adhesive strips and place the heated stage over the microscope
stage.
d) Place your stage clips/caliper over the heated stage and use the included
thumbscrews and spacers to secure to the main stage.
e) Plug power cable into nearest electrical outlet. Flip the power switch to
turn the stage warmer on/off.
e) Set the temperature control system to the desired temperature and wait for
it to pre-heat before placing your slide(s).
Precautions for safe usage:
a) Please note the temperature setting of your stage when initially turned
on. Do not leave the stage unattended when set to a high temperature.
b) Avoid touching the heated stage during use to prevent burns. Allow adequate
time for cooling down before touching.
c) For indoor use only.
d) Store in a cool, dry location.
e) Disassembling, modifying, or tampering of the stage warmer will void the
1-year warranty.
© 2022 AmScope. All Rights Reserved.
amscope.com |
1-888-950-2888