AEG MWTK76 30” Fully Integrated Stainless Steel Trim Kit User Guide
- June 15, 2024
- AEG
Table of Contents
MWTK76 30” Fully Integrated Stainless Steel Trim Kit
User Guide
MWTK76 30” Fully Integrated Stainless Steel Trim Kit
MWTK76
30” Fully Integrated Stainless Steel Trim Kit (1-Piece)
Available Finishes/Colors
MWTK76
Stainless Steel
OVERVIEW
Create a finished look for your microwaves that are placed within a cabinet opening. This easy-to-install trim kit features a smooth clean finish that instantly gives your kitchen a modern makeover.
FEATURES
One piece stainless steel trim kit to fit a 30” (76cm) cabinet opening
Provides an integrated look for added style in your kitchen Offers a stylish
appearance with a stainless steel finish Compatible with Panasonic 1.6 cu.ft.
Microwaves (models: Panasonic NNSD78LS, NNSD786S or equivalent)
Works well in an appliance tower over a built-in oven, or undercounter
TECHNICAL DETAILS
Product Dimensions In/mm (W/H)
29 13/16” / 15 1/16”
758mm / 383mm
Cut-Out Dimensions In/mm (W/H)
28 1/2” / 14 5/16”
524mm / 363mm
Notes: AEG reserves the absolute and unrestricted right to change product
materials and specifications, at any time, without notice. Warranties: Please
see the Use & Care manual or AEG website for a statement of limited warranty.
For more information on our entire line of products, go to www.aeg-
appliances.ca or call 905.829.3980. ©AEG. All rights reserved.
PRODUCT DIMENSIONS (WxH – IN/MM)
Width: 29 13/16” x Height: 15 1/16”
Width: 758mm x Height: 383mm
CUT OUT DIMENSIONS (WxH – IN/MM)
Width: 281/2” x Height: 14 5/16”
Width: 524mm x Height: 363mm
VOID CUT-OUT
- Unscrew the 4 screws holding the 2 pieces of wood in place, and retain the screws.
- Screw the 2 pieces of wood onto the base of the cabinet. The wooden strips should touch the inside of the front of the MWTK-76, and be positioned with the centre of the wooden strips (1817/64”= 46.4cm) apart.
- Being careful not to scratch the microwave door, lift the microwave onto the wooden strips, and move it back about 2 inches.
- Place the MWTK-76 into position. Use the 4 screws and screw them through the flanges into the side gables.
- Pull the microwave forward, and align the front of the microwave with the front of the MWTK-76.
- To stop the microwave from sliding backwards whilst opening, it is recommended to attach a piece of wood behind the feet of the microwave, on the wooden supports.
- Air must be able to flow from the microwave upwards and into the room, or roof space. Failure to comply will void the manufacturer’s warranty on the microwave oven.
Other Product Downloads Available at aeg-appliances.ca
WARRANTY INFORMATION
AEG Appliances are designed and manufactured to the highest standards. Each appliance is covered by a comprehensive 2-year parts and labour warranty. Refer to product warranty policy for complete terms and conditions.
FOR PARTS & SERVICE
Euro-Parts & Service
39822 Belgrave Road, Belgrave, ON. N0G 1E0 1 866 722 2262
www.euro-parts.ca • parts@euro-
parts.ca • service@euro-parts.ca
AEG appliances are imported and distributed in North America by Euro-Line
Appliances Inc.
For more information, please visit one of our showrooms or
www.ela.ca / www.elawest.ca
EURO -LINE APPLIANCES INC.
871 Cranberry Court
Oakville, ON L6L 6J7 Canada
905.829.3980
1-800.421.6332
info@ela.ca
EURO -LINE APPLIANCES INC.
101-1014 Homer Street
Vancouver, BC V6B 2W9 Canada
604.235.3980
1-855.352.9378
infowest@ela.ca
References
- Homepage - AEG Appliances
- Expired DNS Hosting Services | DNS Made Easy
- Homepage - AEG Appliances
- Euro-Line Appliances - Canada's Supplier of European Home Appliances
- Euro-Line Appliances - Canada's Supplier of European Home Appliances
- Euro-Parts Canada | After Sales Service for Residential Appliance Brands
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>