Vinotemp VT-12TEDi Replacing the Temperature Control Board Instructions
- June 4, 2024
- VINOTEMP
Table of Contents
VT-12TEDi Replacing the Temperature Control
Board Instructions
VT-12TEDi: Replacing the Temperature Control Board
Using these instructions, you will be able to replace a faulty temperature
control board with a new one.
Be sure to have the unit unplugged while performing the installation. TOOLS
REQUIRED: flat-head screwdriver.
INSTRUCTIONS:
Open the door of the VT-12TEDi and remove the back cover of the temperature
control panel.
You will now be able to
see the temperature control board.
Using a screwdriver,
remove the screws so that you may remove the control board from the door.
Place these screws in a safe place for later use.
Remove the existing temperature control board.
You will now find 3
terminal wires that connect the control board to 3 important functions; one
for the interior LED light, one that allows the power button to function, and
the NTC wire.
Carefully remove the terminal wire from the old temperature control board.
Replace the old
temperature control board with the new one.
Insert the terminal wires
into the new temperature control board by turning.
Position the new
temperature control board into place.
Using the screws saved
from removing the old temperature control board; fasten the new temperature
control board to the door.
Replace the cover of the
temperature control board.
Questions?
Contact Vinotemp customer service at
1-800-777-8466 or
info@vinotemp.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>