iRobot RVD-Y1 Robot Vacuum Owner’s Manual

iRobot RVD-Y1 Robot Vacuum

Product Information

The i5 Robot Vacuum is a versatile cleaning appliance that automates the process of vacuuming. It is designed to efficiently clean various surfaces, including hard floors and carpets. The
robot vacuum is equipped with advanced features to ensure effective cleaning while providing safety and convenience.

Usage Instructions

Before using the i5 Robot Vacuum, please read and follow the safety information and precautions provided in the user manual.

• Step 1: Place the charging station on a flat surface, at least 4 feet away from stairs or any other potential obstacles.

• Step 2: Ensure that the battery is properly installed. The compatible battery models are ABL-D1, ABL-D1A, ABL-D2Ax, and ABL-D2Bx (x = 1 or 2).

• Step 3: Connect the charging station to a standard household AC power socket using the provided power supply cord.
  Note that using any other power supply cord may result in damage to the robot vacuum.

• Step 4: Place the i5 Robot Vacuum on the charging station to initiate charging. The robot will automatically dock and charge when the battery is low.

• Step 5: Once fully charged, the robot vacuum is ready for use. Press the power button to start cleaning.

• Step 6: During operation, the robot vacuum will navigate the cleaning area and avoid obstacles using built-in sensors. It will automatically adjust its cleaning mode based on the surface type.

• Step 7: After cleaning, the robot vacuum will return to the charging station for recharging. It is recommended to empty the dust bin and clean the brushes regularly for optimal performance.

For any further assistance or troubleshooting, please refer to the detailed instructions provided in the user manual or contact Customer Care.

Safety Information

Important Safety Information
This owner’s guide includes information for Regulatory Model(s): RVD-Y1, 17070 Battery Model(s): ABL-D1, ABL-D1A, ABL-D2Ax, ABL-D2Bx (x = 1 or 2)

SAVE THESE INSTRUCTIONS
WARNING: When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS
WARNING: To reduce the risk of injury or damage, read and follow the safety precautions when setting up, using, and maintaining your robot.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• This is the safety alert symbol. It is used to alert you to potential physical injury hazards.
• Obey all safety messages that follow this symbol to avoid possible injury or death.

• WARNING: Indicates a hazardous situation that, if not avoided, could result in death or serious injury.
• CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
• NOTICE: Indicates a hazardous situation that, if not avoided, could result in property damage.

GENERAL WARNING

• Your robot is not a toy. Small children and pets should be supervised when your robot is operating.
• Do not sit or stand on your robot or Home Base.
• Do not use unauthorised chargers. Use of an unauthorised charger could cause the battery to generate heat, smoke, catch fire, or explode.
• Your robot comes with a region approved power supply cord and is designed to be plugged into a standard household AC power socket only. Do not use any other power supply cord. For replacement cords, please contact Customer Care to ensure proper selection of country specific power supply cord.
• Do not open your robot or Home Base. There are no user serviceable parts inside. Refer servicing to qualified service personnel.
• Risk of electric shock, use indoors in dry locations only.
• Do not handle your robot or Home Base with wet hands.
• Store and operate your robot in room temperature environments only.
• If the room to be cleaned contains a balcony, a physical barrier should be used to prevent access to the balcony and ensure safe operation.
• Clean cliff sensors to remove buildup.
• If the room to be cleaned contains equipment, such as a stove, fan, portable heater, or humidifier, remove the equipment before operation. There is a risk of injury, accident or
• malfunction if the robot comes in contact with and pushes the equipment.
• Do not allow your robot or charging station to become wet.
• Be aware that floors may be slippery after wet cleaning with your robot.

CAUTION

• Do not operate the robot in areas with exposed electrical sockets in the fl
• If the device passes over a power cord and drags it, there is a chance an object could be pulled off a table or shelf. Before using this device, pick up objects like clothing, loose papers, pull cords for blinds or curtains, power cords, and any fragile objects.
• Be aware that the robot moves on its own. Take care when walking in the area that the robot is operating in to avoid stepping on it.
• Do not use this device to pick up sharp objects, glass, or anything that is burning or smoking.
• Perform the required maintenance as per the Owner’s Guide to ensure safe operation of the robot and charging station.
• If the robot is operating on a floor with stairs, please remove any clutter from the top step.

NOTICE

• Do not allow your robot or Home Base to become wet.
• Do not place anything on top of your robot.
• The failure to maintain cleanliness of charger contacts could result in loss of ability for the robot to charge the battery.
• Before running your robot on hard floors, please test your robot on a small section of the hard floor to ensure that it is compatible. Using your robot on a hard floor that is not compatible could result in damage to your floor. Contact your hard floor manufacturer with questions on compatibility.
• Before running your robot on carpets or rugs, ensure that the carpets or rugs are compatible with the dual multi-surface rubber brushes on your robot, otherwise known as beater bars. Using your robot on a carpet or rug that is not compatible could result in damage to your carpet or rug. Contact your carpet or rug manufacturer with questions on compatibility.

CHARGING STATION
WARNING

• Do not use a Home Base with a damaged cord or plug. If the cord or plug is damaged, it must be replaced.
• Always disconnect your robot from the Home Base before cleaning or maintaining it.
• Charge your robot only with the power supply provided. The provided power supply delivers safety extra low voltage corresponding to the input marking on the robot which is required to maintain safe operation.
• To prevent the risk of your robot falling down stairs, ensure that the Home Base is placed at least 4 feet (1.2 metres) away from stairs.

NOTICE

• Product may not be used with any type of power converter. Use of power converters will immediately void the warranty.
• If you live in an area prone to electrical storms, it is recommended that you use additional surge protection. Your Home Base may be protected with a surge protector in the event of severe electrical storms.

CLEANING SOLUTION
WARNING

• Household cleaning products are safe when used and stored according to the instructions on the label. Always be sure to read and follow the directions carefully.
• Only use authorised cleaning solutions found on answers.irobot.com/s/roomba-combo-cleanser.
• For cleaning solution warnings, please refer to the outer box and solution bottle.
• Keep away from children
• Keep away from eyes. If product gets into eyes rinse thoroughly with water
• Rinse hands after use

BATTERY WARNING

• Do not open, crush, or heat above 176°F: 80°C, or incinerate. Follow the manufacturer’s instructions.
• Do not short-circuit the battery by allowing metal objects to contact battery terminals or immerse in liquid. Do not subject batteries to mechanical shock.
• Periodically inspect the battery pack for any sign of damage or leakage.
• Do not charge damaged or leaking battery packs, do not allow the liquid to come in contact with skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice. Place the battery in a sealed plastic bag and recycle or dispose of it safely according to local environmental regulations, or return it to your local authorised iRobot Service Center for disposal.
• Lithium ion batteries and products that contain lithium ion batteries are subject to stringent transportation regulations. If you need to ship this product (with the battery included) for service, travel, or any other reason, you MUST see the Troubleshooting section of your manual or contact customer care for shipping instructions.

CAUTION
Battery usage by children should be supervised. Seek medical advice immediately if a cell or a battery has been swallowed.

NOTICE

• The battery pack must be removed from the robot before recycling or disposal.
• For best results, only use the iRobot Lithium Ion Battery that comes with the robot.
• Do not use non-rechargeable batteries. Use only the rechargeable battery supplied with the product. For replacement, purchase identical iRobot battery or contact iRobot Customer Care for alternative battery options.
• Always charge and remove the battery from your robot and accessories before long-term storage.

This symbol on the battery indicates that the battery must not be disposed of with unsorted common municipal waste. As the end-user, it is your responsibility to dispose of the end-of-life battery in your appliance in an environmentally sensitive manner as follows:

1. returning it to the distributor/dealer from whom you purchased the product; or
2. depositing it in a designated collection point.

The separate collection and recycling of end-of-life batteries at the time of disposal will help to conserve natural resources and to ensure that it is recycled in a manner that protects human health and the environment. For more information, please contact your local recycling office or the dealer from whom you originally purchased the product. Failure to properly dispose of end- of-life batteries may result in the negative potential effects on the environment and human health due to the substances in the batteries and accumulators. Information regarding the effects of problematic substances in the battery waste stream may be found at the following source: http://ec.europa.eu/environment/waste/batteries/

About Your Roomba® Robot Vacuum

Top View Bottom View

Home Base Charging Station Buttons & Indicators

Using Your Roomba® Robot Vacuum

Positioning the Home Base™ Charging Station

WARNING: To prevent the risk of your robot falling downstairs, ensure that the charging station is placed at least 4 feet (1.2 meters) away from stairs.

Download the iRobot Home App and Connect to Wifi

• Follow step-by-step instructions to set up your Roomba.
• Set an automatic cleaning schedule and customise your cleaning preferences.
• Access to tips, tricks, and answers to commonly asked questions.

Charging

• Place the robot on the charging station to activate the battery.
• Note: Your robot comes with a partial charge, but we recommend that you charge the robot for 3 hours prior to starting the first cleaning job.
• If the “CLEAN” text is pulsing while charging, the robot is in the middle of a cleaning job and will automatically resume where it left.off once recharged.
• The robot uses a small amount of power whenever it is on the Home Base. You can put the robot in a further-reduced power state when not in use. For instructions and more details on this Reduced Power Standby Mode, refer to the iRobot Home App.
• For long-term storage, turn off the robot by removing it from the charging station and holding down for 10 seconds. Store the robot in a cool, dry place.

Cleaning
Remove excess clutter from floors before cleaning. Use your robot frequently to maintain well-conditioned floors.

• Your robot will automatically explore and clean your home. It will return to the charging station at the end of a cleaning job and whenever it needs to recharge.

• To send the robot back to its charging station, tap . A blue light ring pattern will indicate that the robot is seeking the charging station.
  When your robot detects an especially dirty area, it will engage Dirt Detect™ mode, moving in a forward/backward motion to clean the area more thoroughly. The light ring indicator will flash blue.

• Tap to spot clean a designated area. The robot will spiral outward about 3 feet (1 meter) and then spiral inward to end where it started. The light ring indicator will show a blue spiral.`

• When the robot senses its bin needs to be emptied, the light ring indicator will illuminate in a red sweeping motion toward the rear.

Troubleshooting

• Your robot will tell you something is wrong by playing an audio alert and turning the light ring indicator red. Press CLEAN or tap the bumper for details. Further support and instructional videos are available in the iRobot Home App.
• After 90 minutes of inactivity off the charging station, the robot will automatically end its cleaning job.

Battery Safety & Shipping
For best results, only use the iRobot Lithium Ion Battery that comes with your robot.

WARNING: Lithium ion batteries and products that contain lithium ion batteries are subject to stringent transportation regulations. If you need to ship this product for service, travel, or any other reason, you MUST follow the below shipping instructions.

• Battery MUST be turned off before shipping.
• Turn off the battery by removing the robot from the charging station and holding down for 10 seconds. All indicators will turn off.
• Package the robot securely for shipping.
• If you need further assistance, contact our Customer Care team or visit global.irobot.com .

Accessories
**Dual Mode Virtual Wall® Barrier***

• Note: For best results, place at least 8 feet (2.5 meters) from the charging station.

• Use the Dual Mode Virtual Wall® barrier to keep the robot in the places you want cleaned — and out of the ones you don’t. It creates an invisible barrier that only the robot can see. You can leave the device in position between cleanings.

• *Dual Mode Virtual Wall Barrier included for selected models only.

Choose the mode to meet your needs:

• Virtual Wall Mode: When the switch is in the Virtual Wall position ( ), the device will create a linear barrier to block openings up to 10 feet (3 meters).
  • Note: This barrier gets wider as it gets further from the device (refer to illustration).
• Halo Mode: Toggle the switch to the Halo position ( ), to create a circular barrier. This will prevent the robot from approaching zones you want to protect such as a pet bowl, vase, or under a desk. The Halo barrier extends approximately 12 inches (30 centimetres) from the centre of the device.
• Note: The batteries will last about 8-10 months under normal use. If you are not planning to use your Virtual Wall barrier for an extended period of time, be sure to turn the switch to the Off or middle position.

Roomba Combo™ Bin

IMPORTANT: You must register your product in the iRobot Home App and complete a mapping run before using your Combo Bin. See the Activate your Combo Bin card for instructions.

1. INSTALL THE MOPPING PAD
   Slide the pad down over the track. Press the pad to the plate to attach.

2. FILL THE BIN
   Fill the Combo Bin with water. You may also use a compatible cleaning solution. Compatible solutions are listed at this answers.irobot.com/s /roomba-combo-cleanser Note: The product starts wicking as soon as water is put into the tank.

3. SWAP THE BINS
   Remove the Dust Bin from the robot, and install the Combo Bin.

Important: Do not flip the robot over with the Combo Bin installed

Care and Maintenance

Care and Maintenance Instructions

• To keep your robot running at peak performance, perform the procedures on the following pages.
• There are additional instructional videos in the iRobot Home App. If you notice the robot picking up less debris from your floor, empty the bin, clean the filter, and clean the brushes.

2 months
Full Bin Sensor| Clean every 2 weeks| –
Front Caster Wheel| Clean every 2 weeks| Every 12 months
Edge-Sweeping Brush and Multi-Surface Brushes| Clean once a month (twice a month if you have a pet)| Every 12 months
Sensors and Charging Contacts| Clean once a month| –
Mopping pad| Clean after a mopping job| After 30 washes
Wick cap| Replace if dirty or shows wear| –

Note: iRobot manufactures various replacement parts and assemblies. If you think you need a replacement part, please contact iRobot Customer Care for more information.

• Replacement frequency may vary. Parts should be replaced if visible wear appears.

Emptying the Bin

1. Press bin release button to remove bin.
2. Open bin door to empty bin.
3. Place bin back in the robot.

Cleaning the Filter

1. Remove the bin. Remove the filter by grasping both ends and pulling out.
2. Remove debris by tapping the filter against your trash container.
3. Reinsert filter with ridged grips facing out. Place bin back in the robot.
   Important: The robot will not run if the filter is not installed correctly. Replace the filter every two months.

Cleaning the Full Bin Sensors

1. Remove and empty the bin.
2. Wipe the inner sensors with a clean, dry cloth.
3. Wipe the bin door with a clean, dry cloth.

Washing the Bin

Important: Do not wash the filter. Remove the filter before washing the bin.

1. Release the bin, remove the filter, and open the bin door.
2. Rinse the bin using warm water. Note: Bin is not dishwasher safe.
3. Make sure bin is completely dry. Reinsert filter and place bin back in the robot.

Cleaning the Edge-Sweeping Brush

1. Use a coin or small screwdriver to remove the screw holding the Edge-Sweeping Brush in place.
2. Pull to remove the Edge-Sweeping Brush. Remove any hair or debris, then reinstall the brush.

Cleaning the Front Caster Wheel

1. Pull firmly on the front wheel module to remove it from the robot.
2. Pull firmly on the wheel to remove it from its housing (see illustration below).
3. Remove any debris from inside the wheel cavity.
4. Reinstall all parts when finished. Make sure the wheel clicks back into place.

Important: A front wheel clogged with hair and debris could result in damage to your floor. If the wheel is not spinning freely after you have cleaned it, please contact Customer Care.

Cleaning the Multi-Surface Brushes

1. Pinch the brush frame release tab, lift the tab, and remove any obstructions.
2. Remove the brushes from the robot. Remove the brush caps from the ends of the brushes. Remove any hair or debris that has collected beneath the caps. Reinstall the brush caps.
3. Remove any hair or debris from the square and hexagonal pegs on the opposite side of the brushes.
4. Remove the bin from the robot and clear any debris from the vacuum path.
5. Reinstall the brushes in the robot. Match the shape of the brush pegs with the shape of the brush icons in the cleaning head module

Cleaning the Sensors, Camera Window, and Charging Contacts

1. Wipe sensors, camera window, and charging contacts with a clean, dry cloth.

Important: Do not spray cleaning solution or water onto the sensors or sensor openings.

Cleaning the Mopping Pad

1. HAND WASHING
   Thoroughly wash the pad with warm water.

2. MACHINE WASHING Wash using the warm cycle, then air dry. Do not tumble dry. Do not wash with delicates.

Replacing the Wick Cap

1. Remove pad plate
2. Remove the wick cap by pulling on the side rubber tab.
3. Replace with a new wick cap, pressing firmly into place to create a tight seal to prevent leaking.
4. Reintall pad plate

Regulatory Information

• Hereby, iRobot Corporation declares that this robot vacuum cleaner model RVD-Y1 is in compliance with the EU Radio Equipment Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.irobot.com/compliance .

• Hereby, iRobot Corporation declares that this robot vacuum cleaner model RVD-Y1 is in compliance with the Radio Equipment Regulations 2017. The full text of the UKCA

• Declaration of Conformity is available at the following internet address: www.irobot.com/compliance .

• Chemical information report listing SVHC (substances of very high concern) per EU Regulation EU 1907/2006 can be found here:
  www.irobot.com/compliance .

• This vacuum cleaning robot, model RVD-Y1, incorporates the Sundial radio module model: AXF-Y1. This vacuum cleaning robot, model RVD-Y1 operates in the WLAN 2.4 GHz band. The 2.4 GHz band is limited to operate between 2412 MHz and 2472 MHz with a maximum EIRP output power of 19.1 dBm (81.28 mW) at 2442 MHz.

• This symbol on the product indicates that the appliance must not be disposed of with unsorted common municipal waste. As the end-user, it is your responsibility to dispose of the end-of-life appliance in an environmentally sensitive manner as follows:

1. returning it to the distributor/dealer from whom you purchased the product; or
2.  depositing it in a designated collection point.

Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise
from inappropriate waste handling. Please contact your local authority for further details or your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation. More information may be found at the following source: https://ec.europa.eu/environment/topics/waste-and-recycling/waste-electrical- and-electronic-equipment-weee_en Recycle your end-of-life iRobot product responsibly as per local regulations. The following is a list of the WEEE recycling organisations contracted by iRobot at the time of product sale.

sammelstoesterreich/>
Belgium| Recupel| https://www.recupel.be/en/where-to- go/?searchcollectionPoints=&categories=1%2C2%2C3%2C4#
Germany| Zentek| https://www.ear-system.de/earverzeichnis/sammel-und- ruecknahmestback
Denmark| Elretul| https://www.dpa- system.dk/DPAApplications/DPADB.aspxwf=CollectionPointSearch.as
Spain| Ecotic| https://punto-limpio.info/
France| Eco-systemes| https://www.eco-systemes.fr/france
Ireland| WEEE Ireland| http://www.weeeireland.ie/household-recycling/where- can-i-recycle/
Netherlands| Wecycle| https://www.watismijnapparaatwaard.nl/
Sweden| El-Kretsen| https://www.sopor.nu/sortera- återvinn/
United Kingdom| Repic| http://www.responsible-recycling.co.uk/contact-us /find-your-localrecy

Manufacturer Address: iRobot Corporation, 8 Crosby Drive, Bedford MA 01730, USA

iRobot Customer Care
USA & Canada

• If you have questions or comments about your dirt disposal, please contact iRobot before contacting a retailer.
• You can start by visiting global.irobot.com for support tips, frequently asked questions, and information about accessories. This information can also be found in the iRobot HOME App. If you need further assistance, call the US Customer Care team at 877-855-8593.
• iRobot USA Customer Care Hours
• Monday to Friday, 9AM — 9PM Eastern Time
• Saturday and Sunday 9AM — 6PM Eastern Time

Outside USA & Canada

• Visit global.irobot.com to:
• Learn more about iRobot in your country
• Get hints and tips to improve your product performance
• Get answers to questions
• Contact your local support center

The complete owner’s guide is available at about.irobot.com/manual#comboi5

©2022 iRobot Corporation, 8 Crosby Drive, Bedford, MA 01730 USA. All rights reserved. iRobot and Roomba are registered trademarks of iRobot Corporation. Wi-Fi and the Wi-Fi logo are registered trademarks of Wi-Fi Alliance.

References

• Manuals | iRobot
• Welcome to LWC Communities!
• Global.iRobot.com
• Elektrogeräte sammeln | Elektro ade
• iRobot®: Robot Vacuums and Mops
• irobot.com/compliance
• iRobot Italia | Scopri lo Shop Online Ufficiale
• Contact Us - Electrical Recycling | REPIC | Responsible Recycling
• Buscador de puntos-limpios | Buscador de Puntos Limpios
• stiftung elektro-altgeräte register
• Donner une seconde vie à mes équipements électriques | ecosystem
• Find a collection point - Recupel
• Wat is mijn apparaat waard? | Wat is mijn apparaat waard?

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>