BAYLAN BTK.10 Electronic Electricity Meters User Manual

BAYLAN BTK.10 Electronic Electricity Meters

IMPORTANT POINTS AND SAFETY

• Wiring the meter up to the network must be done by a person who hos knowledge about both technical and safety warnings.
• The meter ports which are carrying voltage must not be touched for any reason, electricity must be cut off while both wiring on and wiring off to the network.
• The outer surface of the meter must not be cleaned with cleaning agents containing abrasives.
• The suitability of the meter type to be installed should be checked by authorized personnel. Otherwise, your meter will be damaged due to incorrect meter selection and connection. The meters in this case are out of guarantee.
• Calibration and programming of the meter ore are done during manufacturing. Marketing is provided after each meter quality check. There is no maintenance or programming that the user can do.
• BAYLAN Electronic Electricity Meters is a superior technology product in compliance with world standards. All technical information and documents are in the company’s Intellectual properties and copyrights.

TECHNICAL SPECIFICATIONS

GENERAL FEATURES

• Eight different time zones can be set during the day and saved in one of four different tariffs. II is possible to create different time zones and different tariffs for 4 different day types (weekdays, Saturday, sundoy, and public holidays).
• Automatic daylight save implementation.
• Tariff information, meter date and time, and daylight saving time can be changed by authorized personnel.
• If the top cover is opened, it records the opening date and time.
• If the terminal cover is opened, it records the first opening date for each month and the total number of openings in that month. The lost 12 months are stored in memory.
• In the case of magnetic tampering, it records the start, end times, and total magnetic tamper duration.
• The meter records the consumed energy for each tariff in the lost 12 months, the maximum demand in the lost 12 months, and the date and time of the demand.
• The meter records the lost 10 of voltage connection faults and current connection faults.
• The meter records the start and end dates of the lost 99 short and long power cuts.

WARRANTY CONDITIONS

1. The warranty period starts after the delivery date of the product and is valid for 5 years.
2. Products and all spore ports are under the guarantee of our company.
3. In case the meter is defective, the consumer shall be deemed to have the right to inspect the goods within the scope of Article 11 of the Act on the Protection of Consumer No 6502;
4. a- Withdraw the contract
5. b- Request reduction from soles price
6. c- Request free repair
7. d- Right to request that the sold product be replaced with an indefective duplicate.
8. If the consumer chooses the right of free repair from these rights; the manufacturer must bear the cost of labor, and the cost of replacing ports without any charge to the make repair. The consumer can also use the free repair right against the manufacturer. The seller and producer are jointly responsible for using this right of the consumer.
9. In case the customer uses the right to free repair;
   • Another failure during the warranty period
   • Exceeding the target time to get repair;
   • If repairs are not possible, a report by an authorized service station, dealer, manufacturer, or importer. Consumers may request to replace the meter with the one which freed from defects, discount the price regarding the defect ratio, or refund the meter price from the seller. The seller can not refuse the consumer’s request. If this request is not fulfilled, the seller and producer are jointly liable.
10. The repair period of the goads can not exceed 20 business days. This period starts from the delivery date of the goods to the authorized service station on the date of notification to the authorized service station or vendor within the warranty period and ends at the authorized service station if the goods are out of the guarantee period. If the malfunction cannot be fixed within 10 working days, until the completion of the repair of the goods, has to allocate another product with similar characteristics to the use of the customer. In case of malfunction within the warranty period, the period of repair will be added to the warranty period.
11. Defects arising from unauthorized use of the goods are not covered by the guarantee.
12. The consumer may apply to the Consumer Arbitration Court or the Consumer Court where the settlement is located or where the consumer transaction is made during the disputes that may arise in connection with the exercise of the rights arising from the guarantee.
13. In case of Warranty Certificate is not issued by the seller, the consumer may apply to the General Directorate of Protection of the Consumer and the Market Surveillance of the Ministry of Customs and Trade.

This guarantee is provided by Boylan Ol~u Aletleri San ve. Tic. Ltd ~ti. does not cover the remedies that may arise from normal or unintended use of the device as well, as,

1. Damages and failures due to misusage,
2. Damages end failures occurring, after delivery to the user, during transportation, loading and unloading,
3. Failure to make the installation according to the installation and operating instructions and faulty connections,
4. Products for which the warranty label is torn or seals ore broken,
5. Fire, lightning, flood, and earthquake (natural disasters), malfunctions and damages due to improper environment and accidents,
6. In the event of unauthorized intervention of the device for reporting,
7. In case the warranty label is damaged.
   The repair cost is charged to the customer. The warranty is valid only for the product failure within the warranty period specified below. The warranty is invalid; when the original serial number on the device is removed, destroyed, or tampered with, or the warranty certificate is damaged.

• Programmable load profile period (15-30-60 min.).
• Programmable mox. demond period (1 5-30-45-60 min.). With communication, it is possible to reset demand once a month. (Only the meters which capable of measuring reactive power.)

READING THE INFORMATION ON THE METER

• When the meter is powered, the main information of the meter is displayed sequentially with 5-second periods. By pressing the button, the next information can be switched quickly. If the button is pressed for 5 seconds, the meter screen switches to the sub-menu. Waits for the button to be pressed again to display the next information. If the button is not pressed for 30 seconds or the button is pressed for 5 seconds, the meter display returns to the main menu.
• When during power cuts, it is necessary to press the button to see the information on the screen. Each press displays the next information.
• All the dotes that the meter records and the dotes which displayed on LCD can be read from the meter with the communication interlace. When during power cuts, the button must be pressed to wake up the meter to read.

1. RTC Error
2. Low battery.
3. RTC battery is low.
4. Communication
5. If the top cover is opened, it will flash on the screen and it will not be lost under any circumstances
6. If the terminal cover is open, it will be displayed continuously on the screen. If it is flashing, indicates that the terminal cover has already been switched on and off
7. Blinks during the magnetic intervention. Continuous display on the screen indicates that a magnetic interference has been made before.
8. Indicates the tariff slice.
9. The display shows which tariff consumption information is available.
10. It shows the energized phases and current directions.
11. Indicates that information about the demand is displayed.
12. Indicates that information about the inductive energy is displayed.
13. Indicates that information about the capacitive energy is displayed.
14. Indicates that information about the power factor is displayed.
15. Quadrant symbol
16. Show units

LCD INFORMATION

WIRING DIAGRAM

BTK. 10 ond BTK.30 the inner diameter of the phase and neutral bushes of the is 7,5 mm.

BTK. 20 and BTK.40 the inner diameter of the phase and neutrol bushes of the is 6,0mm.

LCD INFORMATION

Meters which capable al measuring export power.

INSTALLATION INSTRUCTION:

1. Energy must be cut off/ when assembling and disassembling the meter.
2. Phase connection and neutral connection must be done according to the connections diagram. (When making connections, it is necessary to make sure that the ends of the cables are properly opened, the screws in the connection terminals ore light enough so that they do not damage the conductors, and ! there is no faulty connection).
3. Make sure that the meter terminal cover closes without tension.
4. Meler starts working only when installed and energized, thus the screen starts displaying information.
5. If lock symbol 2 appears on the display, the terminal cover is not installed correctly.

EU DECLARATION OF CONFORMITY

Manufacturer Name: Baylan Olcu Aletieri San. Tic. Ltd. Sti
Address : A.O.S.B. 10032 Sk. No: 16 CgI/ZMR – TURKIYE
Phone: +90 232 497 97 00
Web: www.baylanwatermeters.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>