VUBER TECHNOLOGIES Pulse Pilot Vape Battery User Guide
- June 13, 2024
- VUBER TECHNOLOGIES
Table of Contents
- VUBER TECHNOLOGIES Pulse Pilot Vape Battery User Guide
- TURNING THE UNIT ON:
- HOW TO USE AUTOMATIC MOD!
- MANUAL MODE:
- WAX ATTACHMENT:
- MAGNETIC CARTRIDGE ADAPTOR: (SOLD SEPARATELY)
- LIMITED LIFETIME WARRANTY
- Read More About This Manual & Download PDF
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
VUBER TECHNOLOGIES Pulse Pilot Vape Battery User Guide
Thank you for purchasing the Vuber “Pulse” battery. Patented and designed in Seattle Washington, the Pulse was engineered with you in mind. Simply attach your favorite 510 thread cartridge, press the button and vape.
TURNING THE UNIT ON:
Press the button 5 times rapidly until you see the V logo come up on the LED screen. The LED screen displays the battery life, voltage, resistance, and wattage
HOW TO USE AUTOMATIC MOD!
Automatic mode is the default mode for your battery. When an atomizer is
attached, the battery will read out the resistance, and recommend a power
setting Step 1: Press button 5 times rapidly
until you see the V logo come up on the LED screen Step 2: Attach Cartridge
Step 3: Press the button once with an atomizer attached to automatically
adjust to the recommended settings. Step 4: Hold the button down and inhale
If you prefer a different setting, you can switch to “Manual Mode
MANUAL MODE:
You can override the automatic settings of your battery by choosing manual mode. Step 1: Press button 5 times rapidly until you see the V logo come up on the LED screen
Step 2: Attach Cartridge
Step 3: To cycle through the different temperatures, continue to press the
button three times until you have reached your desired temperature.
Temperature Settings: “28v 320 34y 3 Step 4: Once the desired temperature has been selected, hold the button down and inhale.
Note: You may go back to the automatic settings by removing the atomizer and
attaching the same or different atomizer. Due to the Never Burn technology,
each setting will sill taper the power as you hold the button. This is not
something you can override.
Warning: Manual mode is recom- mended for advanced users; user error may cause
cartridges to taste burnt.
CHARGING: The Pulse is charged using a USB-C port on the bottom of the battery
(charger included).
« The LED screen shows the battery charging, and the amount of battery life
left « The Pulse should be charged with a low-amp USB or laptop charger. DO
NOT use *Fast-Charging” cables or chargers. « Youmay use your battery while it
is being charged
Use the included cable to charge the Pulse. Replacement cables can be
purchased on our website.
WAX ATTACHMENT:
(SOLD SEPARATELY)
You may use any wax attachment with the —Pulse battery, as it is Sub-Ohm
capable. Certain wax attachments may need to use our extendable piece to allow
them to it properly. Simply attach the wax extension first and then attach the
wax atomizer of your choosing.
MAGNETIC CARTRIDGE ADAPTOR: (SOLD SEPARATELY)
The Pulse batery can be used with most magnetic cartridges by attaching the
adaptor. Simply screw your Pulse magnet adaptor into the threads of the
battery. Attach the cartridge to the magnetic
plate, and all the functions of the Pulse willwork as per the user manual.
TIPS: « The Pulse is designed to work with all 510 thread cartridges, but not
all cartridges are designed the same, and it may be necessary to tighten or
loosen certain cartridges to get the
battery to read them properly. « You may notice your LED screen flashing “No
Atomizer” try loosening or tightening the atomizer/cartridge to remove this
message. If his does not work, there may be an issue with the
atomizer/cartridge itself. If the battery reads “Shorted” there is an issue
with your atomizer/ cartridge. Please discontinue use The heads of the Pulse
have been sealed to prevent any issues and protect the battery from leaking
cartridges. Itis still recommended to clean your electrode and the surrounding
area to make sure proper connection occurs (this is the area around the
threads on the battery
that your atomizer is attached to). « The best method for cleaning is to use a
Q-Tip dipped in isopropyl alco- hol to remove any residue buildup
LIMITED LIFETIME WARRANTY
Vuber Technologies is proud to offer a limited lifetime warranty on all Vuber devices. To qualify for a warranty claim, register your product within 30 days of purchase. To register or submit a warranty claim. please visit our website. 00 TO3 Vubervaporizers.com
- Approved warranty claims are typically processed within 3-5 business days.
- A shipping and handling fee applies to each item replaced.
- Cartridges. atomizers. and heating coils will need to be replaced over time and are not covered under warranty.
- Please retain your receipt to qualify for warranty replacement.
- Instruction videos are available under each product page. on the Vuber website.
- Damage caused by improper use. physical abuse, moisture exposure, or any activity other than vaping – will not be covered under warranty.