CAMTREE G-PM-01 Power V2 Suction Mount Camera Gripper Instruction Manual
- June 13, 2024
- CAMTREE
Table of Contents
CAMTREE G-PM-01 Power V2 Suction Mount Camera Gripper
Product Information
The Power V2 Suction Mount Camera Gripper (G-PM-01) is a versatile camera mounting system designed to securely attach cameras to smooth surfaces on vehicles. It includes aluminum rods, rubber grippers, ball tilt heads, rope hooks, ropes, a camera mounting platform, a 100mm bowl head, a 1/4 & 3/8 camera mounting bolts, and a hard case for storage and transportation.
Product Usage Instructions
- Inspect the contents of the package to ensure you have received all the components listed in the manual.
- Setup the gripper:
- Screw in the Ball Tilt Head on the suction cups.
- Adjust the Ball Tilt Heads to the desired positions for the aluminum rods.
- Screw the adjustable length legs into the locking ball tilt heads on top of the suction cup mounts.
- Note: Use the provided rods (3, 6 & 12) in any combination to create the desired setup.
- Tighten the knob of the Ball Tilt Head to lock the rods in place.
- Screw the camera mounting platform to the rods.
- Fix both suction cups with metal loops on your vehicle.
- Attach one end of the rope with metal hooks to the camera mounting platform and the other end to the metal loop of the suction cup. Tighten the rope properly.
- Loosen the four Allen bolts on the camera platform and align the 100mm bowl with it.
- Re-insert and tighten the bolts using an Allen key.
- Mount your Fluid Head (Not Included) on the Bowl Head and secure your camera setup on the fluid head.
- To use Rope Hooks, press the lever to loosen the rope. Remove the metal hook from the metal loop of the suction cups.
- Attach Rope Hooks to your vehicle, then attach metal hooks to rope Hooks and tighten the rope properly to secure your gripper.
- You can also attach your camera setup directly to the camera mounting platform using the provided screw.
- The Camera mounting platform has three leg attachment points with locking ratchet joints for tilt and swivel adjustments. Each joint has a quick-turn knurled lock ring for easy adjustment.
- To adjust the tilt or swivel of each leg, unlock the appropriate joint by turning the lock ring in the unlock position. Adjust the leg position as needed and then turn the lock ring back in the lock direction to prevent camera shaking during vehicle motion.
Your Camtree Power V2 Suction Mount Camera Gripper is now ready to use!
What’s In The Box
Please inspect the contents of your shipped package to ensure you have
received everything that is listed below.
Gripper Setup
-
Suction cup mounts can be affixed to just about any smooth surface on any vehicle. Large pin on the side of each unit, suctionmounts are good to go.
-
Screw in the Ball Tilt Head on suction cups. Adjustable Ball Tilt Heads allow for an extensive range of lockable positions for aluminum Rods.
-
Three adjustable length legs screw into the adjustable locking ball tilt heads at the top of the3 suction cup mounts.
NOTE : Three rods are provided for each length – 3”, 6” & 12”. These rods can be linked together in any combination you need to create the perfect setup. -
Tighten the knob of the Ball Tilt the Head to lock the rods in a position.
-
Screw in camera mounting platform to Rods.
-
Now fix both suction cups with metal loops on your vehicle.
-
Attach one end of the Rope with metal Hooks to the camera mounting platform and another end Metal loop of the Suction cup. Tighten the rope properly.
-
Now loosen the four Allen bolts on the Camera platform, and align 100mm bowl with it.
-
Re-insert the bolts and tighten with Allen key properly.
-
Now mount your Fluid Head (Not Included) on the Bowl Head. Then secure your camera set up on the fluid head.
-
To use Rope Hooks, press the lever to loosen the rope. Remove the metal hook from the Metal loop of the suction cups.
-
Attach Rope Hooks to your vehicle, then attach metal hooks to Rope Hooks and tighten the rope properly to secure your gripper.
-
You can also attach your camera set up directly to the camera mounting platform with a provided screw.
-
The Camera mounting platform of the Power Mount Gripper has three leg attachment points that are each fitted with two positive locking ratchet joints, one for tilt and one for swivel. Each locking ratchet join has a quick-turn knurled lock ring for easy adjustment. You can unlock and lock each joint with a slight twist.
-
To adjust tilt or swivel of each leg, first, make sure the lock ring on the appropriate joint is in position, then adjust the position of the leg as per need. And then turn the lock ring back in the LOCK direction that the camera won’t shake from joint movement while the vehicle is in motion.
Swivel Adjustments
Tilt Adjustments
YOUR CAMTREE POWER V2 SUCTION MOUNT CAMERA GRIPPER ALL DRESSED UP AND READY TO
GO!
Warranty
We offer one one-year warranty for our products from date of purchase. Within this period, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.
Liability: We are not liable for damage caused by products that we do not
supply or from mishandling in transit, accident, misuse, neglect, or lack of
care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us
immediately and we promise our utmost support and care until you use our
product.