CAMTREE HUNT CH-GRND-CKIT Grand DSLR Camera Cage Kit Instruction Manual
- June 3, 2024
- CAMTREE HUNT
Table of Contents
CAMTREE HUNT CH-GRND-CKIT Grand DSLR Camera Cage Kit
INTRODUCTION
Camtree Hunt launches its fully functional combo of camera cage with matte box & follow focus that guarantees videomakers to capture high impact shots without any trouble. The Robust cage features a quick release system with a back stop that provides anti twisting and is dovetailed for a secure fit. Incorporated into the cage is a push button safety pin that prevents accidental release of the base plate. This allows for quick and secure mounting and dismounting of your camera to the cage. This cage provides easy access to the battery allowing you to replace it without removing the camera from the cage. (Note: you can not change the GH4 battery as it is 0.20mm short!).It adds full functionality with top and bottom multifunctional rod support for accessory mounting options and a super tough top handle makes it easy to carry around & enables easy handheld shots.
IN THE BOX
Please inspect the contents of your shipped package to ensure you have received all that is pictured and listed below.
ASSEMBLING YOUR CAMERA CAGE KIT
- Attach the Dovetail Plate with your tripod plate and mount it on your tripod
- Mount the cage on dovetail plate and secure it with side red knob
- Insert the 300mm long female threaded rods into the cage and tighten the side red knob
- Remove the quick release plate from the cage and attach it with your camera
- Insert the camera with quick release into cage and lock the red lever
- Mount the top handle on the cage and tighten the knob to secure properly.
- Insert the 150mm male threaded rods and tighten the side knob to secure the rods properly.
- Plug your cable and tighten the knob to secure it.
ASSEMBLING YOUR GEAR RING AND FOLLOW FOCUS
- Attach the gear ring over the lens focusing ring and tighten it with the screw then insert the follow focus into 15mm rods.
- Tighten the side and bottom knob of the follow focus to secure properly.
- Use the speed crank for the accurate focusing
- Attach the matte box into 15mm rods and tighten the knob
Warranty
We offer one year warranty for our products from the date of purchase. Within this period of time, we will repair it without charge for labor or parts. The warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.
Liability
We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, or lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our utmost support and care until you use our product.