smartair 6.25 Boost Portable Radiator Fan Cordless Rechargeable And Automatic Heat Sensor Owner’s Manual
- June 13, 2024
- smartair
Table of Contents
smartair 6.25 Boost Portable Radiator Fan Cordless Rechargeable And
Automatic Heat Sensor
Box Contents
Auto switch| Determines if the automatic On/Off feature is active. Switch On
(-) – Auto engage to turn on/off at 33°C Switch Off (o) – Manually controlled
---|---
Speed switch| Determines the fan speed of High (11), Low (I) or Off (0)
Display Screen| °C – Degree reading e.g. 35°C is the radiator temperature
% – Battery charge level Hi/Lo – Fan speed setting
Radiator compatibility guide
Ideal for:
Double convection radiators.
Suitable for most:
- Cast iron style
- Modern tubular
- Single wall radiators.
Not suitable for:
Oil-powered heaters, towel heaters, electric heaters or fireplaces.
Disclaimer
In the instance that your radiator design does not have a flat top surface,
the unit may be less effective in performance.
Set up instructions
For best performance, the product should be placed flat in the centre of the radiator, ensuring the base of the unit and the top of the radiator are running parallel. The lip on the front of the unit should overhang the radiator and fit as close as possible to the front face. Where possible, always ensure the safety magnet is in contact with the top surface of the radiator to stop any risk of falling.
Stability feet installation (optional)
- The stability feet are for optional use and designed to be used with traditional style, single convector radiators.
- To install, screw the thread until the position between stability foot and unit front lip is at an optimum width to fit over the radiator. Once set, position over the radiator and slot into place. This is designed to help prevent the unit from tipping forward and falling from the radiator.
Troubleshoot
Ensure stability feet are tight to prevent vibrating when in use.
Safety Information
-
Only use on top of a radiator. DO NOT cover the inlet and outlet air vents.
-
Do not use on radiators that can reach a temperature of above 70°C. As a safety feature the SmartAir Boost will stop working if radiator temperature reaches 70°C. It will resume working once radiator temperature has dropped below 6S0C.
-
This appliance contains batteries that are not replaceable.
-
WARNING: For the purposes of recharging the battery, only use the detachable supply unit
provided with this appliance. -
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children should not play with the appliance. Cleaning and maintenance should not be made by children without supervision.
-
The appliance is only to be used with the power supply unit provided with the appliance.
-
Keep these instructions for future reference.
Care and Maintenance
This product is wipe clean only. Avoid using detergents. For best performance,
the device should be regularly checked and cleaned of surface dust, as well as
ensuring radiators are dust free.
Do not dispose of in household waste. Please recycle our product and packaging
where facilities exist.
BOOST GIVE YOUR HEATING A BOOST
Distributed by:
OCG Consumer Products B.V Eemnesserweg 11-10 1251 NA Laren the Netherlands
Please recycle our product and packaging where facilities exist. Check with
your Local Authority or retailer for recycling in your country.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>