VISUAL COMFORT MF1200PNNTW Floor Lamp Instruction Manual

VISUAL COMFORT MF1200PNNTW Floor Lamp

Product Information

Product Name: Wimberley Floor Lamp Item # MF 1200

Package Contents

1. Base (F)
2. Loader (J)
3. Harp (C)
4. Saddle (D)
5. Finial (A)
6. Shade (B)
7. Light bulb (not included)
8. Protective cover (I)
9. Wrench

Notice: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.

Product Usage Instructions

1. Carefully remove all parts from the box. Place on a clean, soft surface.
2. Install the base (F) and loader (J) to the rod (E) and secure with the lock washer (H) and hex nut (G) using the provided wrench.
3. Install the harp (C) by squeezing it together and inserting it into the top of the saddle (D).
4. Remove the finial (A) from the harp (C).
5. Remove the shade (B) from packaging and install it to the harp (C) using the finial (A). If the shade has additional packaging, carefully cut it off from the interior of the shade to avoid damages.
6. Install the light bulb into the socket.
7. Remove the protective cover (I) from the plug.
8. Plug the lamp into an electrical outlet and test the fixture.

NOTICE:
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.

TOOLS REQUIRED (NOT INCLUDED)

Scissors

ASSEMBLY INSTRUCTIONS

1. Carefully remove all parts from the box. Place on a clean, soft surface

2. Install base (F) and loader (J) to rod (E) and secure with lock washer (H) and hex nut (G) using provided wrench.

3. Install harp (C) by squeezing together and inserting into the top of saddle (D).

4. Remove finial (A) from harp (C).

5. Remove shade (B) from packaging and install to harp (C) using finial (A).
   NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages.

6. Install light bulb into the socket.

7. Remove protective cover (I) from plug.

8. Plug into electrical outlet and test fixture.

Care Instructions

Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>