SIMRAN SMP-1000 Professional Amplified Speaker System Instruction Manual
- June 6, 2024
- SIMRAN
Table of Contents
Professional Amplified Speaker System SMP-1000
SIMRAN
Professional Amplified Speaker System With USB, MMC, FM, BT
Instruction Manual
Thank you very much for buying this speaker, please kindly read instruction manual before operating the product
Product: Professional Amplified Speaker System Model:SMP-1000
Technical Specification:
- Amplified plastic loudspeaker.
- Woofer 15′, 30 Oz, 38mm VC. ‘Raeder 25mm driver, 4 Oz.
- Frequency responsc55H0-2015H0
- Sensitivity: 96 z 2dB
- With USE!. MMC. FM. BT
- Power:1000W
- Voltage:AC110/220V, 60/50150
Notes:
- Please read the entire attached document carefully before using the device for your reference.
- The power supply must match the demand of the device with reliable ground wire.
- All covering signal should be complied with the demand of device.
- The device should be equipped far away high temperature, moisture and powerful electro and magnetic field.
- Please don’t use the organic cleaner but dry soft cloth to clear the device.
- When not in use, unplug the unit from the mains.
- Set the unit to the lowest volume prior to switching it on.
- Only use suitable means of transportation if you want to move the speaker -BE WARE OF YOUR BACK!
- USB Port
- MMC Port
- Control button of Mp3
- MIC input with XLR and 6.35mm connectors
- Stereo input with RCA
- Button to switch between LINE/ AUX and USB/MMC/FM/BT
- MIC Priority
- AUX IN: 3.5mm Multimedia Audio Interface
- MIC VOL
- BASS
- TREBLE
- Master knob to adjust the volume of speaker
- WAIT/OFF/ON
- MP3/LINE VOL
- Echo effect
- LED power
- AC power
- Power Socket
FCC statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>