GSDRAFT Clutch Drive Seam Leaks Instructions

GSDRAFT Clutch Drive Seam Leaks

Clutch Drive Seam Leaks

• Check and see if the customer has been cleaning their Base Plate Assembly and oiling it regularly.
• If not, the compression spring may not be working properly which also can affect their seaming.
• The problem could be either the spring isn’t working properly, or further adjustments for the seaming is needed.

To Clean it:

• Pull the assembly out of the Frame

• Remove the Base Plate

• Pull the Base Plate Shaft of the handle

• Completely clean everything and the lubricate it and reassemble

• Also please check the roller pins they ride on. If there is any wear on them, that would knock the spec out as well.

• There will be a shoulder or a line wore into the pin. The CY9F/S can also be worn.

• Once the rollers are removed take a look at the inside jaws of the bracket and make sure there are no wear marks on those as well.

• Lubrication is the most important maintenance to the machine.

• Please make sure you clean the roller and pin with hot soapy water.

• Take a toothbrush to clean the roller bracket to be sure all the stickiness is removed from there as well. Install them back in and lubricate.

References

• GS Draft System Solutions | Your Draft System Solution Provider

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>