INFICON 718-202-G11 GAS Mate Combustible Gas Leak Detector Owner’s Manual
- June 13, 2024
- INFICON
Table of Contents
INFICON 718-202-G11 GAS Mate Combustible Gas Leak Detector
Product Information
The COMBUSTIBLE GAS LEAK DETECTOR is a versatile tool designed to safely and reliably detect leaks of combustible gases, flammable refrigerants, and hydrogen forming gas. It is suitable for use in heating, air conditioning, refrigeration, and automotive applications. The detector is backed by an industry-best three-year warranty.
Advantages
- Detects natural gas, propane, isobutane, ammonia, hydrogen forming gas (95/5), and more
- Ultimate sensitivity of 5 ppm for methane, R290 (propane), and R600a (isobutane)
- Intrinsically safe for use in combustive/explosive environments
- Great for flammable refrigerants like R290, R600a, and R441a
- Runs on two D-cell batteries
Product Usage Instructions
- Ensure that the detector is powered off before use.
- Insert two D-size alkaline batteries into the designated battery compartment.
- Turn on the detector by pressing the power button.
- Allow the detector to warm up for a few seconds.
- Hold the detector close to the suspected area of gas leak.
- If a combustible gas leak is detected, the detector will emit an audible alarm and display the gas concentration level.
- To ensure accurate readings, move the detector around the area to locate the source of the leak.
- If necessary, use the probe to access hard-to-reach areas.
- After use, turn off the detector and remove the batteries for storage.
Note: Always follow safety precautions and guidelines provided by relevant authorities when working with combustible gases and flammable refrigerants.
COMBUSTIBLE GAS LEAK DETECTOR
Safely detect combustible gas and flammable refrigerant leaks.
GAS-Mate is an intrinsically safe combustible gas leak detector that can safely and reliably detect leaks of combustible gases, flammable refrigerants, and hydrogen forming gas. It is a versatile tool for use in heating, air conditioning, refrigeration, and automotive applications. You can leak check with confidence knowing GAS-Mate is backed by an industry-best three-year warranty.
Using Instructions
SPECIFICATIONS
- Includes: GAS-Mate
- Combustible gas sensor
- Two D-size alkaline batteries
- Carrying case
- Compatible refrigerants: Propane (R290), isobutane (R600a), R441a, hydrogen forming gas (95/5), natural gas, methane, ammonia, and more
- Sensitivity: 5 ppm for methane, propane (R290), isobutane (R600a), and hydrogen 1 ppm for gasoline
- Power source: Two D-size alkaline batteries (use Duracell® MN1300 to maintain intrinsically safe approval)
- Battery life: 25 hours
- Weight: 700 g
- Certifications: CE Intrinsically safe for Class I, Division I, Groups A – D, T4 and II 3G Ex nA nL IIC T4 X as per MET Laboratories Listing #E112145
- Probe length: 38 cm
- Warranty: Three-year
ORDERING INFORMATION AND ADVANTAGES
ORDERING INFORMATION
- GAS-Mate: 718-202-G11
Accessories and Replacement Parts
- Sensor: 706-700-G1
- Carrying case: 705-700-G1
ADVANTAGES
- Detects natural gas, propane, isobutane, ammonia, hydrogen forming gas (95/5), and more
- Ultimate sensitivity of 5 ppm for methane, R290 (propane), and R600a (isobutane)
- Intrinsically safe for use in combustive/ explosive environments
- Great for flammable refrigerants like R290, R600a, and R441a
- Runs on two D-cell batteries
Warranty
- Warranty: Three-year
MORE INFORMATION
WATCH OUR VIDEO
