Upright Go 2 Posture Trainer Pro Kit User Manual
- June 13, 2024
- UPRIGHT
Table of Contents
Upright Go 2 Posture Trainer Pro Kit
HOW TO GET STARTED
- Download the UPRIGHT app.
- Follow the tutorial in the app for a step-by-step guide on how to get started.
TIPS FOR SUCCESS
- For best results within 2 weeks, it is highly recommended to use the GO 2 daily
- Use your GO 2 in a cool indoor environment
- Leave your GO 2 on your desk, in its case, as a reminder to train
- Finally, don1 t forget to charge your GO 2
DEVICE SHORTCUTS
-
Turn On
Short Click -
Turn Off
Long Click -
**Set Posture (Calibration)***
Double Click -
**Switching Modes Training/Tracking***
One Click
WHAT’S IN THE BOX
-
UPRIGHT GO 2
Your personal posture trainer, measures your posture 700 times a second -
CASE
Store your GO 2 in the case while charging it on your desk or when you1re on the go -
ADHESIVES
Reusable silicone adhesives for attaching the GO 2 to your upper back -
CHARGING CABLE
A USB-C cable for charging your G02 -
ALCOHOL PADS
Use the alcohol pads to clean the adhesives and/or your skin before use -
ADHESIVE REMOVAL TOOL
Use it to peel off your old adhesive when replacing it with a new one
CHARGING YOUR GO 2
Charging your battery regularly will allow you to use your GO 2 as often as you choose.
- Place your GO 2 in its case for safekeeping and plug the charging cable into the USB port.
- A tu 11 charge takes a bout 3 hours.
- Once your battery is fully charged, the LED light will turn green.
LED INDICATORS
ADHESIVES
CARE & MAINTENANCE
- With proper maintenance, each adhesive can be used about 3-10 times, depending on skin type.
- Make sure your skin is clean and dry before using the GO 2. Use the alcohol pads provided to clean skin.
- The adhesive doesn’t attach well to sweaty skin. Therefore, we recommend training indoors.
- When you’re not using your GO 2, store it in its case to keep the adhesive clean.
REPLACING THE ADHESIVE
-
Remove the old adhesive from the GO 2. We recommend using the removal tool provided.
-
Important: Make sure you remove ALL parts of the old adhesive completely, so there’s nothing green left on your GO 2.
-
Take a new adhesive and peel off just the white cover from one side.
-
Attach the sticky pa rt to the GO 2, inside the thin gray frame.
-
When you want to start using your GO 2, peel off the green cover that says 11This side on your back”.
-
Attach the GO2 to your back.
