SONY ZRCT-300 LED Wall Display Controller Owner’s Manual

: June 4, 2024
: Sony

Table of Contents

SONY ZRCT-300 LED Wall Display Controller Owner’s Manual
WARNING
Precautions
Specifications
- References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SONY ZRCT-300 LED Wall Display Controller Owner’s Manual

SONY ZRCT-300 LED Wall Display Controller.jpg

Before operating the unit, please read this manual thoroughly and retain it for future reference.

When using the product, do not use it for purposes other than those described in the instruction manual.

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

WARNING
This apparatus must be earthed.

WARNING
When installing the unit, incorporate a readily accessible disconnect device in the fixed wiring, or connect the power plug to an easily accessible socket- outlet near the unit. If a fault should occur during operation of the unit, operate the disconnect device to switch the power supply off, or disconnect the power plug.

CAUTION
For safety, do not connect the connector for peripheral device wiring that might have excessive voltage to the following port:

Output connectors (RJ-45)
Controller Link input connector (RJ-45)
Controller Link output connector (RJ-45)
Control 1 connector (RJ-45)

WARNING

Use the approved Power Cord (3-core mains lead) / Appliance Connector / Plug with earthing-contacts that conforms to the safety regulations of each country/region if applicable.
Use the Power Cord (3-core mains lead) / Appliance Connector / Plug conforming to the proper ratings (Voltage, Ampere).

If you have questions on the use of the above Power Cord / Appliance Connector / Plug, please consult a qualified service personnel.

IMPORTANT
The nameplate is located in the following location on the unit.

Bottom

For the customers in the U.S.A.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

All interface cables used to connect the equipment to peripherals must be shielded type to comply with EMC standard(s) and to prevent undesired operation due to radiated emissions. When cables are supplied, always use them for this purpose.

If you have any questions about this product, you may call:

Sony Customer Information Service Center 1-800- 222-7669 or http://www.sony.com/

Supplier’s Declaration of Conformity

Trade Name : SONY
Model : ZRCT-300
Responsible party : Sony Electronics Inc.
Address 16535 Via Esprillo, San
Diego, CA 92127 U.S.A.
Telephone Number : 858-942-2230

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

For the customers in Canada
CAN ICES-3 (A)/NMB-3(A)

WARNING
Operation of this equipment in a residential environment could cause radio interference.

For the customers in Europe
This apparatus shall not be used in the residential area.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

This equipment is not suitable for use in locations where children are likely to be present.

For the customers in the U.S.A.
SONY LIMITED WARRANTY – Please visit http://www.sony.com/psa/warranty for important information and complete terms and conditions of Sony’s limited warranty applicable to this product.

For the customers in Canada
SONY LIMITED WARRANTY – Please visit http://www.sonybiz.ca/pro/lang/en/ca/article/resources-warranty for important information and complete terms and conditions of Sony’s limited warranty applicable to this product.

For the customers in Europe
Sony Professional Solutions Europe – Standard Warranty and Exceptions on Standard Warranty.

Please visit https://pro.sony/support-services/primesupport/support- professional-solutionseurope-standard-product-warranty for important information and complete terms and conditions.

For the customers in Korea
SONY LIMITED WARRANTY – Please visit http://bpeng.sony.co.kr/handler/BPAS- Start for important information and complete terms and conditions of Sony’s limited warranty applicable to this product.

Precautions

Condensation

If the unit is suddenly taken from a cold to a warm location, or if ambient temperature suddenly rises, moisture may form on the outer surface of the unit and/or inside of the unit. This is known as condensation. If condensation occurs, turn off the unit and wait until the condensation clears before operating the unit. Operating the unit while condensation is present may damage the unit.

Security

SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND RESULTING FROM A FAILURE TO IMPLEMENT PROPER SECURITY MEASURES ON TRANSMISSION DEVICES, UNAVOIDABLE DATA LEAKS RESULTING FROM TRANSMISSION SPECIFICATIONS, OR SECURITY PROBLEMS OF ANY KIND.
Depending on the operating environment, unauthorized third parties on the network may be able to access the unit. When connecting the unit to the network, be sure to confirm that the network is protected securely.
This unit is equipped with a maintenance function performed via a network. Maintenance may be performed with your consent.
From a safety standpoint, when using the unit connected with the network, it is strongly recommended to access the Control window via a Web browser and change the access limitation settings from the factory preset values. Also, it is recommended that you set a password with a sufficiently long character string that is hard to guess by others, and that you store it safely.
Do not browse any other website in the Web browser while making settings or after making settings. Since the login status remains in the Web browser, close the Web browser when you complete the settings to prevent unauthorized third parties from using the unit or harmful programs from running.
When connecting this product to a network, connect via a system that provides a protection function, such as a router or firewall. If connected without such protection, security issues may occur.

Precautions on viewing and displaying 3D images

Do not use the 3D glasses other than for watching 3D images.
While watching 3D images, a viewer may experience unpleasant symptoms such as eye fatigue, tiredness, and feeling sick.
When watching 3D images, it is recommended to take breaks periodically. The length and frequency of the necessary breaks will vary depending on the content being displayed and the physical condition of the viewer.
If the viewer watching 3D images experiences any unpleasant symptoms, stop watching 3D images until the viewer recovers, and consider recommending that the viewer consults a doctor if necessary.
Note that the vision of children (especially those under 6 years old) is still in the developmental stage.
Adults should supervise their children to ensure that they are following the above precautions.
If the content is watched at a closer distance than expected, the fatigue and other effects described above may be severer.
Take measures such as considering the length, content, and interval of the displayed content, and posting of warning signs.
Not for viewing by children without proper adult supervision.

Precautions on the environment when displaying 3D images

Flickering or flashing under some fluorescent or LED lighting, etc.
When the viewer uses the 3D glasses and watch the 3D images under some fluorescent or LED lighting, etc., flickering or flashing lights may be observed.

This flickering or flashing may trigger epileptic seizures or blackouts (photosensitivity) in a very small percentage of individuals.

If the viewer experiences such flickering or flashing, IMMEDIATELY take off the 3D glasses and stop watching the 3D images.

This flickering or flashing may trigger previously undetected epileptic symptoms or seizures in persons who have no history of prior seizures or epilepsy.

If the viewer experiences any of the following health symptoms while using the 3D glasses, IMMEDIATELY take off the 3D glasses and stop watching the 3D images and consider recommending that the viewer consults a doctor before resuming: dizziness, altered vision, eye or muscle twitches, loss of awareness, disorientation, seizures, or any involuntary movement or convulsion.

Do not turn on these lights (light sources) when using 3D glasses.
Be sure to inform the contractor who undertakes the installation or maintenance work about these effects.

Precautions regarding the effect on medical devices

The display cabinet uses strong magnets.
There are areas where the magnetic flux density is likely to be 300 mT or more on the surface that is touched during installation or maintenance work.

This may seriously affect medical devices such as defibrillators, pacemakers, and programmable shunt valves for hydrocephalus treatment.

Keep users of these medical devices away from areas where installation and maintenance work is being performed or where display cabinets are stored.

There is also magnetic flux leakage from the viewing surface, which may affect users of these medical devices when they approach the display cabinet.

Take measures such as posting warning signs depending on the installation conditions.
Be sure to inform the contractor who undertakes the installation or maintenance work about these effects.

(ZRD-C12A/ZRD-C15A/ZRD-B12A/ZRD-B15A only)

Precautions on visually induced motion sickness (VIMS) and postural instability

Depending on the displayed content, display size, and viewing location (distance), a viewer may experience VIMS symptoms such as postural instability or nausea.

The symptoms of VIMS may be severer after some time rather than during or immediately after viewing. Take measures such as posting warning signs.

Furthermore, the movement in one direction in a wide part of the image may induce postural instability. Pay close attention to the displayed contents and installation location (direction) when installing the product in a position where it can be seen from stairs, escalators, landings, or other places that are considered dangerous when posture is unstable.

Other precaution

The fan is a consumable part that will need periodic replacement.

When operating at room temperature, a normal replacement cycle will be about 4 years.

However, this replacement cycle represents only a general guideline and does not imply that the life expectancy of this part is guaranteed. For details on parts replacement, contact your dealer.

Notes

Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.
SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND MADE BY USERS OF THIS UNIT OR MADE BY THIRD PARTIES.
SONY WILL NOT BE LIABLE FOR THE TERMINATION OR DISCONTINUATION OF ANY SERVICES RELATED TO THIS UNIT THAT MAY RESULT DUE TO CIRCUMSTANCES OF ANY KIND.

Specifications

FIG 1 Specifications.JPG

FIG 2 Specifications.JPG

FIG 3 Specifications.JPG

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
DisplayPort is a trademark or registered trademark of Video Electronics Standards Association in the United States and other countries.

Design and specifications are subject to change without notice.

https://www.sony.jp/professional/support/

Read More About This Manual & Download PDF: