Imaging Solutions Fast Frame 600 SA Industrial High Speed Multi Format Stretching of Canvas Prints Instruction Manual
- June 13, 2024
- Imaging Solutions
Table of Contents
Imaging Solutions Fast Frame 600 SA Industrial High Speed Multi Format
Stretching of Canvas Prints
Product Information
fastFrame 600 SA is a fully automated multi-format system for industrial high-
speed stretching of canvases. It is designed for mass production and can mount
up to 163 canvases per hour, depending on the size and operator skills.
The machine eliminates the need for format plates and allows for seamless
production without time loss for change-over.
Highlights
- Multi-format production with automatically adjustable frame intake
- High-speed manufacturing – up to 163 frames/hour
- Developed for industrial production – 24/7 operation
- Designed for the mass production of frame sizes ranging from 200 x 200 mm to 610 x 610 mm
- Interface for automatic loading – frames and canvases can be loaded by robots
- Simple operation
- Quick and cost-effective production without batching
- Barcode reader for automated product selection
Technical Specifications
Dimensions| 3,909 (L) x 1,962 (W) x 2,172 (H) mm / 153.9 (L) x 77.2 (W) x
85.5 (H) inches
---|---
Weight| 1,800 kg / 3,970 lbs
Electricity| 400 V, 50/60 Hz, 3 phases, 3x25A transformer available
(optional)
Pneumatics| Compressed air, 0.55 – 0.7 MPa
Frame Formats| 200 x 200 mm to 610 x 610 mm / 8 x 8 to 24 x 24 inches
Panel Width| Minimum 28 mm / 1.1 inches
Performance| Up to 163 frames per hour (depending on frame size and
operator)
Instruction
fastFrame 600 SA by Imaging Solutions AG
fastFrame 600 SA is a
fully automated multi-format system for industrial high-speed stretching of
canvases.
It mounts up to 163 canvases per hour, depending on the size and operator
skills. This is way faster than manual production.
There is no need for format plates anymore. The machine processes different formats (length / width) one after another without time loss for change-over. This significantly lowers the production cost since no batching and format plate change-over is required.
The operator only loads canvas and frame into the machine and presses Start. All following worksteps are carried out automatically.
Highlights of the fastFrame 600 SA
-
Multi-format production with automatically adjustable frame intake
-
High-Speed manufacturing – up to 163 frames / h Developed for industrial production – 24/7
-
Designed for the mass production of the most requested frame sizes: 200 x 200 mm to 610 x 610 mm
-
Interface for automatic loading
loading of frames and canvases could be done by robots -
Simple operation
-
Quick and cost-effective production without batching
-
Barcode reader for automated product selection
Technical Data
-
Dimensions 3‘909 (L) x 1‘962 (W) x 2‘172 (H) mm / 153.9” (L) x 77.2” (W) x 85.5” (H)
-
Weight 1‘800 kg / 3‘970 lbs
-
Electricity 400 V, 50/60 Hz, 3 phases, 3x25A transformer available (optional)
-
Pneumatics Compressed air, 0.55 – 0.7 MPa
-
Frame formats 200 x 200 mm to 610 x 610 mm / 8“ x 8“ to 24“ x 24“
-
Panel thickness: 15 – 40 mm / 0.6” – 1.6”
-
Panel width: min. 28 mm / 1.1”
-
Performance : up to 163 frames per hour depending on frame size and operator
Imaging Solutions AG | Niederhaslistrasse 14 | 8157 Dielsdorf | Switzerland | +41 44 843 55 55 | info@isag.ch | www.isag.ch