Plastica SSW MOU 12 Chop Saw 160 Ton Moulding Machine Instructions
- June 13, 2024
- Plastica
Table of Contents
SSW MOU 12 Chop Saw 160 Ton Moulding Machine
Product Information
The 160 Ton Moulding Machine is a powerful machine used for
moulding processes. It is designed to handle heavy-duty tasks
efficiently and safely. The machine is equipped with various safety
features, such as safety guards and emergency off buttons, to
ensure the operator’s safety during operation.
Product Usage Instructions
-
Before starting the machine or after a tool change, ensure that
you are wearing safety boots. -
Visually inspect and ensure that all safety guards are properly
in place and securely fastened. -
Turn on the machine by using the isolator switch located on the
wall or post. Also, turn on the heats and open the water
inlet/outlet. -
Turn on the motor and wait for 20 seconds.
-
To turn off the motor, use the red emergency off button. Repeat
this action using the button at the rear of the machine. -
Open the door and try to open the platen. If the platen opens,
turn off the machine and inform the Manager. -
Open the top guard and try to open the platen. If the platen
opens, turn off the machine and inform the Manager. -
Open the nozzle guard and try to open the platen. If the platen
opens, turn off the machine and inform the Manager. -
Open the back door. The motor should turn off. If the motor
stays on, turn off the machine and inform the Manager. -
If all checks are positive, the machine is ready to start.
-
Do not operate the machine unless you have received training
and authorization from the Manager.
After training, it is important to confirm your understanding
and commitment to safety by signing the training document. Wear the
required personal protective equipment (PPE) when using the
machinery and inform the Supervisor or Manager immediately if there
are any issues or the need for further training.
Authorized trainers are responsible for ensuring that trainees
understand how to use the machinery, have the necessary PPE, and
know to report any issues or training needs.
Safe System of Work OPERATING AND SAFETY CHECK INSTRUCTIONS FOR 160 TON
MOULDING
MACHINE BEFORE START UP/AFTER TOOL CHANGE
Name: ……………………………………………………….. Training Date:……………………………..
Instruction
Understood or X
1
Explain that safety equipment must be used at all times and why
safety boots must be used at all times when running machines.
2
Visually check all safety guards are in place and secured.
3
Turn on machine using isolator switch on wall or post, turn on heats,
open water inlet/outlet.
4
Turn on motor, wait 20 seconds, turn off motor using red emergency
off button, repeat this action using button at rear of machine.
5
Turn on motor, open door and try to open platen, if the platen
opens, turn off the machine and inform the Manager.
6
Open top guard, and try to open platen, if the platen opens, turn off
the machine and inform the Manager.
7
Open nozzle guard and try to open platen, if the platen opens, turn
off the machine and inform the Manager.
8
Open the back door, the motor should turn off, if the motor stays on
turn off the machine and inform the Manager.
9
If all checks are positive, the machine is ready to start.
10
Do not use any machine unless trained and authorised by the
Manager.
I have received the above training and fully understand every point that was explained to me. I confirm that I will wear the required PPE equipment when using the above machinery and take all steps to ensure my own safety. I will ask for further training if I need to and will immediately inform the Supervisor or Manager if there are any issues with the machinery.
Name: ………………………………………………………………………………………………………….
Signed: ……………………………………………………………….. Date:…………………………………
I confirm that I have trained the aforementioned person and that they fully understand how to use the above machinery, have received the required PPE equipment and know to inform me immediately of any issues with the machinery or if they require further training. I authorise this person to use the machinery detailed above.
Name: ………………………………………………………………………………….(Authorised Trainer)
Signed …………………………………………………………………… Date: ……………………………
SSW MOU 12 09.02.17