OLIGHT C1eT Obulb Plus Touch Night Light Smart Multicolor Orb Light User Manual

OLIGHT C1eT Obulb Plus Touch Night Light Smart Multicolor Orb Light

IN THE BOX

• Light Orb
  

• Adhesive Metal Badge

• USB Magnetic Charging Cable

Product specification

Table 1: Light Orb

White Light

HIGH

|

300 lumens

|
---|---|---

LOW

|

0.8 lumens

|

Colored Lights (Factory Default)

MODE 1 HIGH

|

40 lumens

|
---|---|---

MODE 2 HIGH

|

65 lumens

|

MODE 3 HIGH

|

90 lumens

|

MODE 4 HIGH

|

0.5 lumens

|

MODE 5 HIGH

|

110 lumens

|

MODE 6 HIGH

|

7 lumens

|

• IPX7

• 1.0m

• Working temperature 0-40°C

• φ3.15H 2.90in
  φ80H 73.7mm
  

• 176g /6.21oz (Including Battery)

• 2000mAh 3.7V

• Above data are tested per ANSI/NEMA FL 1-2009 standard in Olight’s labs for reference.

Table 2: USB Magnetic charging cable

Operating instructions as below

1. Remove the tip sticker on the top before use, see Figure 1;

2. Before first use, please charge the product to unlock it, see Figure 2;

3. Turn on/off, see Figure 3;

4. Lock/unlock, see Figure 4;

5. Change modes, see Figure 5;

6. Change brightness, see Figure 6;

7. Enter the network setting mode, see Figure 7;

8. Application of adhesive metal badge, see Figure 8;

9. The APP operating instructions as below:

10. Download and install the APP, see Figure 9;

|
---|---
11. Add devices, see Figure 10;

12. Add devices successfully, see Figure 11;
    

13. White light/colored light control interface, see Figure 12;
    

14. Music rhythm interface, see Figure 13;
    

15. Planning/Interaction interface, see Figure 14;
    

16. Tips, see Figure 15;
    Figure 15
    Brightness limit: When the product is in a limited state (low battery or high temperature), if
    users change the brightness beyond the limit range with the APP, it is normal that the light
    flickers.
    Auto sleep mode: If the connected Obulb Plus is left without operation for 12 hours, it will enter
    sleep mode automatically and the OLIGHT APP will lose control of it. To regain control, please
    wake up the Obulb Plus with any button operation or by charging it.
    Restore factory lighting mode: When the device enters the network setting mode or is deleted
    from the network, the device will automatically clear the memory lighting mode and return to the
    factory lighting mode.
    whack-a-mole: The Obulb Plus randomly turns on, and when users hit it, it will flash.

• In APP Plan/Interaction interface, the whack-a-mole can be turned on/off.
• If hitting the Obulb Plus switch for 5 or more times in a row, it will exit this mode.
• Automatically exits this mode after 30s of non-operation.
• When the Obulb Plus is locked, it cannot be controlled by the APP. If you want to use the APP to control it, please unlock the Obulb Plus firstly.

WARNING

• Do not place the product near a fire or heat source, or throw the product into a fire.

CAUTION

• Do not look directly at the light source or shine the eyes, because it may cause temporary blindness or damage to the retina in severe cases.
• Do not charge the light with any other non-specified chargers.
• Do not store the product in a car or places where the temperature may exceed 60°C, because it may deform or damage the product.
• Please do not disassemble or modify the battery, or use the battery for other purposes.

NOTICE

• Non-pet toy.

• Do not disassemble the product.

• Do not immerse the product in seawater or other corrosive media as it will damage the product.

• When the product gets hot, please switch it to low brightness mode, or turn it off temporarily.

• Active thermal protection: The built-in sensor monitors the temperature in real time. It prevents overheating by reducing the output.(Part of products)

• In the environment where the temperature is below 0°C, the product only works in low brightness.

• The battery has a high temperature protection function. When working in a high temperature environment (>40°C), it may fail to charge the product.

• Do not short-circuit the charging port with the metallic objects.

• Do not put it in the mouth or lick it, leakage of the charging port can cause discomfort.

• If water enters the charging port, it will cause charging failure. Please put it face down to dry it, or with a hot dryer.

• Keep the charging port clean and dry.

• The tail switch is magnetic, and the metal powder adsorbed on the surface will affect the function, please clean it immediately.

• Do not place the light in a dusty environment, dust may enter the switch and cause it to malfunction (Part of products)

• It is built-in with the lithium battery, please do not drop off it or hit it with heavy objects.

• Do not hit as a ball, because it may cause irreversible damage to the product.

• Not as a baby toy.

• Avoid contacting with sharp objects in case of scratches and damage to the product.

• Do not soak the product in water, because it may damage the product.(Part of products)

• Only two larger size Obulb could be charged on the Omino at a time.

• The product can be charged with an MCC3 charging cable, but the charging indicator may not work properly if doing so.(Part of products)

• While the network data is shared among different phones, but there is only one device online in the mesh network, the device can only be controlled by the mobile phone firstly searching and adding it. If you want to control the device by another mobile phone, please disconnect it and use the other phone to search and add it.(Only Obulb Pro)

• While the network data is shared among different phones, the app will not synchronize the new
  data and preferences after sharing. If you want to synchronize the data, please reshare the data by a new QR code.(Only Obulb Pro)

• OTA upgrade is only available for Android phones.(Only Obulb Pro)

• When the APP imports network data from a QR code, the original data in the APP will be overwritten.(Only Obulb Pro)

• Frequent operation or multi-device control may lead to data congestion and cause the APP to response slowly or no response at all. Please try again or refresh the status.

• When the Bluetooth device uses functions such as cloud timing, delay, automatic scene setting, voice platform control or remote network control, it needs to cooperate with the gateway to work normally.

• When multiple devices are connected to the network simultaneously, they will complete connecting one by one. It will fail if a product hasn’t been connected within 3 minutes. It is recommended that the number of devices that are connected at the same time should be less than 5.

• Keep the charging port clean and dry.
  ïThe light adopts PWM regulation, please keep away from the radio in case of causing noise.

• In order to avoid interference with WIFI, it is recommended to keep the product more than 1.2
  meters away from the WIFI transmitter; if the distance cannot be increased or the network becomes slow, it is recommended to set the WIFI to automatic frequency hopping mode or use the
  2.4G frequency band.(Part of products)

• A USB adapter with 5W(5v1A) or above is recommended. Otherwise, the charging time will be longer.

• Before long term storage, please fully charge the battery.

• The product cannot access high brightness when the battery level is low.

• When the product is in a limited state (low battery or high temperature), if users change the brightness beyond the limit range with the APP, it is normal that the light flickers.

• It is normal that the light flickers when the battery is close to running out.

Exclusion clause

Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual, including but not limited to using the product inconsistent with the recommended lockout mode.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

FCC STATEMENT:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

MEASURES:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

FCC (IC) Radiation Exposure Statement:

This equipment complies with FCC (IC) radiation exposure limits set forth for an uncontrolled environment. The device can be used in portable exposure condition without restriction.

WARRANTY

WITHIN 30 DAYS OF PURCHASE: Contact the original seller for repair or replacement.
WITHIN 2 YEARS OF PURCHASE: Contact Olight for repair or replacement.
USB MAGNETIC CHARGING CABLE: One year.

This warranty does not cover normal wear and tear, modifications, misuse, disintegrations,
negligence, accidents, improper maintenance, or repair by anyone other than an authorized retailer or Olight itself.

Customer Support

USA Customer Support
cs@olightstore.com
Global Customer Support
customer-service@olightworld.com
Visit www.olightworld.com to see our complete product line of portable illumination tools.

Dongguan Olight E-Commerce Technology Co., Ltd 4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road, Changan Town, Dongguan City, Guangdong, China. Made in China

CANTAINS FCC ID: 2ANDL-BTU IC: 28283-OBULBPLUS

References

• Olight | Illuminate Your World.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>