Truweigh International Inc Flex Series Balance Digital Mini Scale User Guide

Truweigh International Inc Flex Series Balance Digital Mini Scale

Thanks!

Thanks for purchasing the FLEX Series Digital Mini Scale! This User Guide is designed to get you up and running quickly with your scale. Scales are precision instruments and require proper care and skill to get the best results. If you have questions or need support, visit us at http://www.obscales.com/support or scan the QR Code on the back of this manual using your smartphone.

What’s In The Box

• User Guide

• Two AM Batteries

• FL Digital Mini Scale with cover/Tray

Key Descriptions

M: MODE – Changes the weighing unit. Hold to enter calibration mode (see Calibration).

POWER/TARE- Turns the scale ON. Hold to turn the scale OFF . Top to zero the scale during normal weighing. Also subtracts the weight of an empty container (see Tare Function).

Weighing Your First Item

1. Press the( ) key to turn the scale on.
2. Place the item on the centre of the weighing platform.
3. Take your reading from the display. You can press the M key to convert between weighing units.
4. The scale’s auto-off function will turn the scale off after 3 minutes of inactivity or you can press the ( ) key to turn the scale off.

Things To Avoid

• Unlevel Surfaces

• Unlevel Surfaces Radio Frequency Interference

• High Humidity

• Air Currents

• Vibration

• Extreme Temps

Tare Function

The Tare function allows you to subtract the weight of a container so that the display only shows the weight of the contents.

Place an empty or container on the platform.
Tap the key  to subtract the container’s weight.

the(!) key Add items to the container to see their weight. on the display.

NOTE: The weight of the container will subtract from ill the available capacity and will leave a negative value on the display once the weight is removed. Press TARE again to return the display to zero.

Auto-Off

By default the scale will auto-off after 180 seconds of inactivity. To change or disable the auto-off timer:

1. Turn the scale off and hold down the MODE key, at the same time quickly press ON/OFF key 4/5 times until 180 is displayed, release the buttons.
2. Press the MODE key to cycle through your choices of 0/60/120/180 seconds. Then press ON/OFF to confirm
3. The display shows ‘PASS’.

Accuracy

Your scale comes calibrated from the factory and most users won’t need to calibrate their scale for a long time. You should check your scale’s accuracy periodically using calibration weights and perform calibration if necessary.
NOTE: Only use trusted calibration weights.
Household items such as bottles and cans with weights printed on the side are not suitable for checking accuracy as these values are approximate and don’t include the container weight (Net Weight).

Calibration

**** Calibration adjustment is permanent and should only be performed using accurate calibration weights that match the requirements for your scale (see the chart on back). Do not use coins or other household items to calibrate.

1. Prepare the required weight for your scale (see chart on back).
2. Find a flat and level surface to perform calibration and let the scale adjust to room temperature.
3. Press( ) to turn the scale on and wait for the scale to stabilise.
4. Press and hold the M key until the display shows ‘CAL’.
5. Make sure nothing is on the platform then press M to confirm the zero point.
6. The display will then flash the required calibration weight.
7. Place the required calibration weight on the centre of the platform.
8. The display will show ‘PASS’ then return to normal weighing mode. You may now turn the scale off or continue weighing.
   

Specifications

| FL-200
---|---
Max Capacity| 200.00 g I 7.055 oz/ 6.430 ozt I 128.60 dwt / 1000.00 ct/ 3086.4 gn
Readability| 0.01 g / 0.001 oz/ 0.001 ozt/ 0.01 dwt / 0.05 ct/ 0.2 gn
Weighing Units| g, oz, ozt, dwt, ct, gn
Dimensions| Overall: 108 mm x 67 mm x 20 mm Platform: 60 mm x 74 mm Display: 32 mm x 13 mm
Calibration

Weight

| 100g (Sold Separately)
Power| 2 x AAA Batteries (Included)
Warranty| 10 Year Limited Warrant

For more information, including weighing tips and support, scan this code with your smartphone Or visit us online at
www.obscales.com/support/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>