louis poulsen AJ Oxford Table Lamp Base Instruction Manual
- June 13, 2024
- louis poulsen
Table of Contents
AJ Oxford Table Base
Arne Jacobsen
AJ Oxford Table Lamp Base
| Light source | Voltage/frequency | Weight | Protection Class | Ingress protection |
|---|
EU: Max 20W E14
KR: Max 20W E14 ****
CN: Max 20W E14
US: Max 20W G16½
JP: Max 4W LDA4L E17| 220-240V/50-60Hz
220V / 60Hz
220V / 50Hz
120V / 50-60Hz
100V / 50-60Hz| 410 w. glass: 1,66 kg / 3.7 Lbs
410 w. metal: 1,86 kg /4.1 Lbs
280 w. glass: 1,61 kg / 3.5 Lbs
280 w. metal: 1,81kg /4 Lbs| Cl. II| IP20 / Dry location
Wipe off dust with a dry, soft cloth. Remove greasy spots etc. with a soft
cloth dampened in lukewarm water (<50° C) with a mild detergent.
Never use detergents containing abrasives and solvents.
Specific instructions for glass: Must be cleaned when cold. All water must
have evaporated before the lamp is switched on again.
EU: Find “LIGHT SOURCE OVERVIEW” here: www.louispoulsen.com
Louis Poulsen A/S disclaims any liability if a half-mirror light bulb is used.
This type of light source reflects the heat and may damage/melt parts of the
fixture.
If the external flexible cable or cord of this luminaire is damaged, it must
only be replaced by the manufacturer or his service agent or a similar
qualified person in order to avoid hazardous situations.
Louis Poulsen A/S • Kuglegaardsvej 19-23 • 1434 Copenhagen K
• Denmark
Tel. +45 70 33 14 14 • [email protected] •
www.louispoulsen.com
30030-I1_00