louis poulsen PH 3-2 Table Lamp Instruction Manual

: June 12, 2024
: louis poulsen

Table of Contents

louis poulsen PH 3-2 Table Lamp
Product Information
Product Usage Instructions
Dimension
Specification
Installation
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

louis poulsen PH 3-2 Table Lamp

louis-poulsen-PH-3-2-Table-Lamp-product

Product Information

The PH 3/2 Table is a design by Poul Henningsen. It is a table lamp that combines functionality and aesthetic appeal. The product code for this specific design is 472 23405-I1. It falls under Class II electrical classification.

Product Usage Instructions

Follow these instructions to use the PH 3/2 Table lamp:

Unpack the lamp carefully and remove all packaging materials.
Place the lamp on a stable and flat surface, ensuring it is not near any flammable objects.
Connect the lamp to a power source using the provided power cord.
Ensure that the lamp is switched off before inserting the plug into the power outlet.
Switch on the lamp using the designated switch/button.
To adjust the brightness, use the dimmer switch if applicable.
To change the bulb, make sure the lamp is switched off and unplugged from the power source. Follow the instructions provided in the user manual for replacing the bulb.
Regularly clean the lamp using a soft, dry cloth. Avoid using abrasive cleaners or solvents that may damage the surface.
If you encounter any technical issues or have further questions regarding the usage of the PH 3/2 Table lamp, refer to the detailed user manual or contact our customer support.

Always prioritize safety when using electrical devices. Keep the lamp away from water and ensure proper ventilation around it. Do not attempt to repair or modify the lamp yourself; seek professional assistance if needed.

Dimension

Specification

Light source 1x40W E14
Voltage/frequency 220-240V/50-60Hz
Weight 2,5 kg
Protection class Cl. II
Ingress protection IP20

The metallised parts of the lamp do not change their appearance over time if the recommendation below is followed.

Do not use thick polish products.
Wipe off dust with a dry, soft cloth. Remove greasy spots etc. with a soft cloth dampened in lukewarm water (<50° C) with a mild detergent.
Never use detergents containing abrasives and solvents.
Specific instructions for mouth-blown glass: Must be cleaned when cold. All water must have evaporated before the lamp is switched on again. The glassware in this luminaire is handcrafted. To ensure the intended lighting comfort, our glassware is mouth-blown. The process may generate air bubbles in the glass, just as its thickness may vary.

Louis Poulsen A/S disclaims any liability if a half-mirror light bulb is used. This type of light source reflects the heat and may damage/melt parts of the fixture.