ROLL-N-LOCK RC220E-XT Chevrolet Silverado Retractable Truck Bed Installation Guide

ROLL-N-LOCK RC220E-XT Chevrolet Silverado Retractable Truck Bed

Product Information

The E-Series Installation Guide is designed for Chevrolet Silverado and GM Sierra vehicles that were manufactured between 2014 and 2018. It comes in four different product codes: RC220E, RC221E, RC220E-XT, and RC221E-XT. The product is covered by a 3-year limited warranty, with the E-Series covers having an extended 5-year limited warranty. For more information on the warranty terms and conditions, please visit www.rollnlock.com/warranty- information.

Product Usage Instructions

To make a claim under the warranty, please follow these steps:

1. Visit the Roll-N-Lock website at www.rollnlock.com/warranty-information.
2. Locate the “How to Make a Claim” section on the website.
3. Follow the instructions provided to initiate the warranty claim process.

Ensure that you have all the necessary information and documentation ready when making a claim. This may include proof of purchase, product code, and any relevant details regarding the issue you are experiencing.

Product Code

• RC220E RC221E
• RC220E-XT RC221E-XT

Caution

• Do not place ANY objects on top of the Tonneau Cover when attempting to open or close. Failure to follow the instructions may result in damage to your vehicle, belongings or Tonneau Cover. To avoid injury keep all body parts clear of Tonneau  Cover and carrier when opening or closing

Parts List

Tools Needed

Wire Cable / Connectors Remotes

Installation Instructions

Powering the unit

Operating the override

• Use only when the cover IS not operating remotely
• Pull the lever and turn to lock in place, the cover will operate manually.
• Unlock the lever and push back to lock the cover.

Any questions please call Roll•N•Lock Customer Service at 800-952-7655 or Any questions please call Roll•N•Lock Customer Service at 800-952-7655 or rollnlock.com

3-YEAR LIMITED WARRANTY

*5-YEAR LIMITED WARRANTY ON E-SERIES COVERS
www.rollnlock.com/warranty-information
This limited warranty is extended by ROLL-N-LOCK Corporation, a Florida corporation, with its principal office at 915 S. Dixie Highway, E., Pompano Beach, Florida (“ROLL-N- LOCK”), to the original purchaser of a ROLL-N-LOCK® truck bed cover or cargo management device. ROLL-N-LOCK warrants its products, when purchased directly or from an authorized reseller, to be free from manufacturer’s defects for a period of three (3) years from the date of purchase on A and M Series covers — five (5) years from date of purchase on E-Series covers. During this period, ROLL-N-LOCK, or its authorized dealer, will repair or replace at no expense to the limited warranty holder, any part found to be defective as a result of the manufacturing process, subject to the limitations and exclusions below (See HOW TO MAKE A CLAIM below). Labor charges associated with removing or reinstalling the product and parts are not covered with this warranty. ROLL-N-LOCK warrants only against defects that arise as a result of normal use of the product in normal environmental conditions. ROLL-N-LOCK does not warrant against the following: (a) improper installation, including, but not limited to, installations performed not in accordance with installation instructions and warning labels; (b) extreme environmental conditions, including, but not limited to, temperatures below negative thirty degrees Fahrenheit (-30°F) or above one hundred-twenty degrees Fahrenheit (120°F); (c) water intrusion, including, but not limited to, leaks as a result of normal use; (d) misuse, abuse, modification, tampering or alteration; (e) improper maintenance; (f) operation outside of the product specifications; (g) normal wear and tear, cosmetic damages or fading or deterioration of the finish caused by exposure to sunlight or chemicals and/or other unusual environmental conditions; (h) negligence; or (i) accidents, flood, fire, earthquake or other acts of God. This warranty does not extend in any respect to accessories or parts not produced by ROLL-N-LOCK and shall not extend to any consequential or incidental damages. This warranty is expressly in lieu of all other warranties expressed or implied, including the warranties of merchantability and fitness for a particular purpose and of all other obligations or liabilities on the part of ROLL-N-LOCK. ROLL-N-LOCK neither assumes nor authorizes any other person to assume for it any other liability in connection with the sale of its products. The warranty expires if the product is removed from the original vehicle or if the original vehicle is transferred to another owner. The warranty is not transferable from the original purchaser. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limits on implied warranties, therefore the above limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. ROLL-N-LOCK does not warrant any products purchased from unauthorized resellers or any products whose serial number has been removed or defaced. For a complete list of ROLL-N-LOCK authorized dealers, please visit ROLL-N-LOCK’s website at http://rollnlock.com and click on the “Find a Dealer” tab.

HOW TO MAKE A CLAIM
For products purchased from a brick-and-mortar dealer, the party claiming must notify the dealer from whom the product was purchased of the defect or malfunction. The dealer will inspect the product and consult ROLL-N-LOCK to be covered by its warranty. ROLL-N-LOCK will send, at no cost to the warranty holder (including freight expense within the continental U.S.A.), the replacement part or parts necessary to correct the defect. If the problem is determined to be caused by improper installation by the dealer, the dealer will, in accordance with his obligation to adhere to ROLL-N-LOCK’s authorized dealer warranty policy, immediately rectify the problem. For products purchased from ROLL-N-LOCK directly, a ROLL-N-LOCK internet dealer or any other authorized outlet that excluded the service of installation, and the warranty holder performed the installation on a do-it-yourself basis, the warranty holder may, at ROLL-N-LOCK’s option, be required to return the defective parts, properly packaged and at the warranty holder’s expense, to ROLL-N-LOCK’s warranty department at the address below. The warranty holder should include a product I.D. number and a brief description of the problem. If the part or parts are found to be defective, the replacement part or parts will be immediately returned to the warranty holder at ROLL-N-LOCK’s expense (limited to the continental U.S.A.). If the warranty holder requires assistance, he may call ROLL-N-LOCK directly at 1-800-952-7655. ROLL-N-LOCK maintains the highest possible standards of manufacturing and quality control. Accordingly, it expects its dealers to adhere to a similar standard when installing its products and upholding this warranty. If you believe you have a defective ROLL-N-LOCK product and encounter any difficulty obtaining satisfaction, please contact ROLL-N-LOCK customer service by telephone at 1-800-952-7655 or by email at [email protected].

ROLL-N-LOCK Corporation, Warranty Department
915 South Dixie Highway • East Pompano Beach, FL 33060 www.rollnlock.com

References

• Roll-N-Lock Tonneau Covers & Accessories | RealTruck
• Roll-N-Lock Tonneau Covers & Accessories | RealTruck
• Roll-N-Lock Warranty Policy & Registration | RealTruck

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>