sensize TR1.4 Low Profile Tracker Instructions
- June 13, 2024
- sensize
Table of Contents
Sensize TR1.4 Low Profile Tracker
TR1.4 Low Profile Tracker
The TR1.4 Low Profile Tracker is a robust, low cost, extremely long battery life tracking device with cellular connectivity. It reports location, detailed indoor location for the retail environment, movement, in-store customer activity (e.g. footfall) and temperature. It also acts as a mobile access point for Sensize Dot trackers. A single TR1.3 can upload data from thousands of Sensize Dot trackers. Used with the Sensize network back end, it enables efficient long-term monitoring of many types of asset.
Physical Characteristics
| Dimensions | 120mm x 80mm x 23mm |
|---|---|
| IP Rating | IP65 Dust ingress/Waterproof |
| Material | ABS Plastic |
| Temperature rating | Continuous operation at -30°C to +60°C. Extended periods |
at temperature extremes may affect the battery life. Short periods at
higher/lower temperatures are acceptable.
Fixing| Two fixing holes suitable for M4/M5/M6 screws (M5 recommended),
selftapping screws or
plastic/metal rivets.
Double sided adhesive mounting tape is also possible.
Key Features
| Cellular | LTE-M (CAT-M1) |
|---|---|
| Short Range Connectivity | Bluetooth Smart v4 + 802.11b/g/n |
| Location | GNSS (Optional) + WiFi + Bluetooth + Cellular Network |
| Sensors | Accelerometer + Temperature Sensor + in store footfall |
| Local storage | Flash memory for 1 year+ of locations, sensor readings and Dot |
Reports
Battery
| Chemistry | Lithium Thionyl Chloride |
|---|---|
| Battery life | 5-6 years depending on configuration |
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>