gofanco G4-0151A Mini-150m 1080p Wireless HDMI Extender User Guide

June 13, 2024
gofanco

gofanco G4-0151A Mini-150m 1080p Wireless HDMI Extender

gofanco G4-0151A Mini-150m 1080p Wireless HDMI
Extender

Thank you

for purchasing from gofanco. Our products aim to meet all your connectivity needs wherever you go. For optimum performance and safety, please read the instructions carefully and keep this User’s Guide for future reference. If you need more information about our products, please visit www.gofanco.com. For technical support, email us at support@gofanco.com. For drivers or manual download, please go to www.gofanco.com/downloads.

Important Safety Notices

Please read safety instructions carefully before installation and operation.

  • Please pay close attention to all warnings and hints for this device
  • Do not expose this unit to rain, heavy moisture, or liquid
  • Do not put any items into the device or attempt to modify its operation
  • Do not repair the device or open the enclosure without professional guidance to avoid electric shocks. Doing so may void your warranty
  • Keep the product in a well-ventilated location to avoid damage from overheating
  • Shut off power and make sure environment is safe before installation
  • Do not plug the HDMI cables in/out when the device is in use to avoid cable damage. Make sure they are plugged into the correct ports

Introduction

The 1080p Wireless HDMI Extender Mini – 150m transmits HDMI signals wirelessly up to 490ft (150m) at 1080p resolution. It requires no cables between the Transmitter (TX) and Receiver (RX), making the installation easy and clean. Great for homes and offices.

Note: Wireless transmission distance will vary due to the environmental conditions. Thick walls, brick, glass, electronic interference, and wireless signals from other devices will shorten the wireless transmission distance or cause signal loss.

Features

  • Wireless transmission distance: 490ft (150m) at 1080p
  • Works in 2.4GHz and 5GHz frequency bands
  • Combines high bandwidth capacity and strong error correcting abilities
  • Supports HDCP 1.3 and IEEE 802.11 a/b/g/n standard
  • Supports 1.485G and TMDS clock up to 148.5MHz
  • HDMI cable limitation: Up to 26ft (8m) AWG26 HDMI cable standard
  • Compact, portable design with powerful embedded antennas

Package Contents

  • 1080p Wireless HDMI Extender Mini – 150m (1 TX and 1 RX)
  • Micro USB to USB Type-A power cables (2pcs)
  • HDMI cables (2pcs)
  • User guide

Installation Requirements

  1. HDMI source device (DVD player, set top box, PC, etc.)
  2. HDMI display device (SDTV/Monitor, HDTV/ Monitor, projector, etc.)

Product Layout

Product Layout

Product Layout

*Note: TX and RX pairing is required if a new/ replacement unit is needed. See Pairing Instructions on page 7.

Hardware Installation

  1. Power off all devices including your HDMI source and HDMI display.

  2. Connect your HDMI source device to the
    Transmitter’s HDMI In connector with an included HDMI cable.

  3. Connect your HDMI display to the Receiver’s HDMI Out connector with an included HDMI cable.

  4. Plug the included Micro USB power cables into the
    Transmitter’s and Receiver’s Power Jacks, then plug both power cables into a reliable USB 3.0 port or wall charger.

  5. The wireless extender is ready for use.

Note: For optimal signal range, install in a clear environment with few obstacles. Wireless signals from other devices may interfere with transmission. Contact our technical support team if you have specific questions.

Connection Diagram

The diagram shows the typical devices used with the wireless extender.

Connection Diagram

Pairing Instructions

The Transmitter and Receiver units are pre-paired at the factory. When a replacement of a Transmitter or Receiver is needed, follow the pairing steps below.

  1. Power off and disconnect all devices.
  2. Connect the TX and RX to reliable power sources using the included Micro USB power cables.
  3. Connect the transmitter’s HDMI out port to the receiver’s HDMI in port using an included HDMI cable.
  4. Wait about 10 seconds for the pairing process to complete.
  5. The extender is ready for use.

Note: Repeat steps 1-5 if pairing is not successful.

Notice

  • Wireless signals transmitted through walls, glass, brick or other solid objects will cause signal loss and decrease the transmission distance
  • External wireless signals from microwaves, wireless mice and wireless keyboards will interfere with HDMI signal transmission
  • Keep the units in a well ventilated environment to prevent it from overheating
  • DO NOT expose the unit to rain, moisture, or liquids
  • DO NOT place anything on the unit
  • DO NOT open the housing, doing so will void the warranty and may cause personal injury due to electronic hazard

FAQ & Troubleshooting

Q: No video output on the remote display:
A: 1) Check the HDMI source device is powered on.
2) Check the HDMI cables for solid connection. Use different HDMI cables if necessary.
3) Connect the HDMI source device directly to the display to see if there is a signal.
4) Pair the transmitter unit and receiver unit. See
Pairing Instructions on page 7 for more information.
Q: Poor video quality:
A: 1) Check the HDMI cables are connected properly.
Use different HDMI cables if necessary.
2 ) Adjust the position of transmitter unit and receiver unit, and make sure they are within the required signal range.
3) Remove other wireless signals and move any obstacles that are blocking the signal line-of-sight.
4) Decrease the distance between the transmitter unit and the receiver unit.
5) Pair the transmitter unit and receiver unit. See Pairing Instructions on page 7 for more information.

Specifications

Resolution Up to 1080p@60Hz
Audio 2Ch Stereo
Bandwidth 148.5MHz (max)
Transfer Rate 1.485Gbps
HDMI Cable Length Input & Output: up to 26ft (8m) each
Working Current Transmitter: 800mA

Receiver: 500mA
Operating Temperature| 5 to 131 F (-15 to 55 C)
Dimensions (LxWxH)| TX & RX: 2.8″x1.3″x0.5″ (70x33x13 mm)
Weight (TX & RX)| 0.057 lb (25.7g) each

Disclaimer

The product name and brand name may be registered trademarks of related manufacturers. TM and ® may be omitted on the user’s guide. The pictures on the user’s guide are just for reference, and there may be some slight differences with the actual products. We reserve the right to make changes without prior notice to a product or system described herein to improve reliability, function, or design.

Customer Support

Thank you for choosing gofanco
www.gofanco.com

gofanco-Logo

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals