HYPERX 4402196 Alloy Origins 60 Mechanical Gaming Keyboard User Guide
- June 13, 2024
- HYPERX
Table of Contents
HYPERX 4402196 Alloy Origins 60 Mechanical Gaming Keyboard
Product Information
The HyperX Alloy Origins 60 is a compact keyboard designed for gaming. It features an adjustable keyboard feet for comfortable typing, a USB-C port for easy connectivity, and comes with accessory keycaps and a USB cable. The keyboard also has function keys with secondary features, allowing users to switch between profiles, control media playback, adjust computer audio, enable game mode, and adjust LED backlight brightness.
To further customize the keyboard’s settings, users can download the HyperX NGENUITY software.
Product Usage
Installation
- Connect the keyboard to your computer using the provided USB cable.
Function Keys
To activate a function key’s secondary feature
- Press the FN key and the desired function key at the same time.
- The secondary feature is indicated on the side-print of the keycap.
Secondary Features
- Switch between profiles : FN + Profile key
- Media control : FN + Skip back/Play/Pause/Skip forward keys
- Computer audio control : FN + Mute/Decrease volume/Increase volume keys
- Enable Game Mode : FN + Game Mode key (disables Windows key)
- LED backlight brightness : FN + Decrease brightness/Increase brightness keys (5 levels)
HyperX NGENUITY Software
- Download the HyperX NGENUITY software from hyperxgaming.com/ngenuity.
- Install and open the software.
- Customize lighting, Game Mode, and macro settings according to your preferences.
If you have any questions or setup issues, you can contact the HyperX support team at hyperxgaming.com/support/keyboards.
Keyboard Overview
- A HyperX Alloy Origins 60 keyboard
- B Adjustable keyboard feet
- C USB-C port
- D Keycap puller
- E Accessory keycaps
- F USB cable
Installation
Installation
HyperX NGENUITY Software
To customize lighting, Game Mode, and macro settings, download the HyperX
NGENUITY Software at
hyperxgaming.com/ngenuity
Questions or Setup Issues?
Contact the HyperX support team at
hyperxgaming.com/support/keyboards
Keyboard Overview
- A – HyperX Alloy Origins 60 keyboard
- B – Adjustable keyboard feet
- C – USB-C port
- D – Keycap puller
- E – Accessory keycaps
- F – USB cable
Installation
Function keys
Press “FN” and a function key at the same time to activate its secondary
feature as indicated on the keycap side-print.
HyperX NGENUITY Software
To customize lighting, Game Mode, and macro settings, download the HyperX
NGENUITY software at:
hyperxgaming.com/ngenuity
Questions or Setup Issues?
Contact the HyperX support team at
FCC Compliance and Advisory Statement
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures
- Reorient the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into and outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any special accessories needed for compliance must be specified in the instruction manual.
Warning: A shielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment.
CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
HyperX is a division of Kingston.
THIS DOCUMENT SUBJECT TO CHANGE WITHOUT NOTICE
- ©2021 Kingston Technology Corporation, 17600 Newhope Street, Fountain Valley, CA 92708 USA.
- All rights reserved. All registered trademarks and trademarks are the property of their respective owners.
- Kingston Technology Europe Co LLP, Kingston Court, Brooklands Close, Sunbury–on–Thames, Middlesex, TW16 7EP, UK. Kingston Technology International Ltd, Stratus House, College & Business Technology Park, Blanchardstown Road
- North, Dublin, D15 PEC4, Ireland
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>