DIAZYME DZ-Lite c270 Open System Benchtop Clinical Chemistry Analyzer Instruction Manual

Table of Contents

DIAZYME-DZ-Lite-c270-Open-System-Benchtop-Clinical-Chemistry-Analyzer-
FIG-1

The DZ-LiteTM c270 is a fully automated, open system benchtop clinical chemistry analyzer. It is designed to perform various assays with ease and accuracy. The analyzer features a compact size and easy installation, making it convenient for laboratory use.
The analyzer includes the following components:
- Lamp Reagent
- Probes Reagent Tray
- Cuvette Washing System
- Reaction Tray
- Sample Probe
- Sample Tray
The DZ-LiteTM c270 is distributed by The Reagent Company. For inquiries or support, you can contact them at 877-722-8910 or via email at contactsales@carolinachemistries.com. More information about the product can be found on their website: www.carolinachemistries.com.

Here are the specifications of the DZ-LiteTM c270:

Reaction Throughput: Up to 270 tests per hour
Optical Measurement: Fixed 13 wavelengths (340 – 800 nm)
Optical Range: OD 0 – 3.0
Optical Source: Tungsten halogen lamp (semi-permanent)
Cuvettes Washing: Automatic cuvette washing with heated water and wash solutions
Pure Water Consumption: Maximum of 3.8 L per hour
Reaction Waste Collection: Dedicated waste container
Dimension and Weight: 32in x 26in x 22in (W x D x H), Weight: Approximately 210 lbs
Power Supply: AC 100/115V, 50/60Hz
Reagent Wheel: Can hold 24 – 36 reagents on-board
Sample Wheel: Can accommodate 30 samples on-board
Interface: Bi-directional
LIS Connectivity: Compatible with Windows 10 / personal computer. Remote diagnostic-capable.
OS / Operation: Windows 10
Reaction Display: Optical absorbance graphic display
Quality Control Views: Current, daily, and cumulative QC. Westgard algorithms.
Output: Ethernet connection for samples and reagents
Barcode Capability: Supported

To use the DZ-LiteTM c270, follow these steps:

Ensure that the analyzer is properly connected to a power supply (AC 100/115V, 50/60Hz).
Place the necessary reagents (24 – 36) on the reagent wheel.
Load the samples (up to 30) onto the sample wheel.
Establish a bi-directional interface with a Windows 10 personal computer for LIS connectivity.
Turn on the analyzer and wait for it to initialize.
Follow the on-screen instructions to select the desired assay and set any necessary parameters.
Insert the cuvettes into the reaction tray.
Ensure that the cuvette washing system is filled with heated water and appropriate wash solutions.
Place the sample probe into the sample tray and ensure proper positioning.
Start the assay and allow the analyzer to perform the optical measurements.
Monitor the optical absorbance graphic display for real-time results.
Review the current, daily, and cumulative quality control views to ensure accuracy and reliability.
Once the assay is complete, dispose of the reaction waste in the dedicated waste container.
If you encounter any issues or require further assistance, please refer to the user manual or contact The Reagent Company at 877-722-8910 or contactsales@carolinachemistries.com.

DIAZYME-DZ-Lite-c270-Open-System-Benchtop-Clinical-Chemistry-Analyzer-
FIG-2

Throughput Up to 270 tests/hr
Optical Measurement Fixed 13 wavelengths (340 – 800 nm)
Optical Range OD 0 – 3.0
Optical Source Tungsten halogen lamp
Cuvettes Semi-permanent
Washing Automatic cuvette washing with heated water and wash solutions
Pure Water Consumption Max: 3.8 L/hr
Reaction Waste Collection Dedicated waste container
COMPONENT
- Dimension and Weight 32in x 26in x 22in (W x D x H), Weight: Approximately 210lbs
- Power Supply AC 100/115V, 50/60Hz
- Reagent Wheel 24 – 36 reagents on-board
- Sample Wheel 30 samples on-board
INTERFACE
- LIS Connectivity Bi-directional
- OS / Operation Windows 10 / personal computer. Remote diagnostic-capable.
- Reaction Display Optical absorbance graphic display
- Quality Control Views Current, daily and cumulative QC. Westgard algorithms.
- Output Ethernet connection
- Barcode Capability Samples and reagents