ZIYOU LANG X6 Dual Mode Gaming Mouse Instruction Manual

DUAL MODE GAMING MOUSE
TYPE-C WIRED+2.4G WIRELESS
OPERATION INSTRUCTION

X6 Dual Mode Gaming Mouse

X6 Gaming Mouse is a gaming mouse with dual-mode-standard TYPE-C wired+2.4G wireless. It adopts a high-end gaming optical sensor and a high-performance main control chip with high pointer locating and high resolution, which can meet your need for high speed and accurate operation. The mouse will enter wired mode when plugging with USB, and change to wireless mode, and be powered by a lithium battery when unplugging the USB port with stable signal transmission, hard to interfere with, easy to use.

Item Specification

Brand: ZIYOU LANG
Model: X6 Optical Sensor PixArt PMW3325
Lighting Source: 16 RGB LED Lamp Beads
Battery Capacity: Lithium Battery/1200mA
Voltage: 3.0-3.7V Current: 0.05-0.25mA
Product Size: 135 mmx80mm x46 mm
Product Weight: 122g±3g (with lithium battery)
Number of Buttons: 14 USB Cable Length: 150mm±10%
Wireless Connection Distance: –CIO meters
Default transmit power: 5DBM DPI Adjustment 800-1600-3200-6400-12000
Support System: Windows 98 / 2000 / ME / NT / XP/VISTA/7/8 /10 /11 /MACOS

Product Features:

• Long button life ensures the durability of the mouse;
• The lens is made of imported optical PC material, high resolution, no scribing, and a strong ability to gather and receive lights can make it through many interfaces and colored paper, gliding smoothly on high gloss slippery surfaces;
• The wear-resistant mouse feet mat can maintain a small movement resistance on any surface to ensure the mouse can move smoothly;
• It is equipped with a DPI indicator light, easy to distinguish the resolution speed, and supports RGB full-color light;
• The mouse uses a symmetrical design, comfort to grab, and is more fantastic with perforated hollow housing and 7 color streamer;
• Made of abrasion resistance paint comfort to hold:
• Environmental friendly saving power mode: the mouse will auto enter light sleep mode if no use in 305 .and will auto enter deep sleep mode to save electricity if no use in 6 minutes.
• Mouse code matching: Unplug the mouse receiver. Long piess3 keys-Left Button+ Scroll Wheel + Right Button, the decorative light will be blue and then plug the receiver. The decorative light will be green if the matching is successful.
• When the mouse enters low voltage. the alarm light flashes 3 times every 5 seconds to give an alarm: When the mouse enters ultra-low voltage, it will shut down.

Function keys

1. Left Button
2. Fire Button
3. .laystick(Four-Direction Button Function: Previous song, next song. volume +, volume—)
4. Forward Button
5. Back Button| 6) Desktop Button (direct one key return)
6. DPI Switch Button
7. Scroll wheel
8. Right Button
9. Light switch button
10. ON/OFF
    ---|---

FCC Couto.
(1) 1115 15.19 Labeling requirements.
This device complies with part 1S of the FCC Rules. Operation is silent 4,0 the following two concitbnsi

1. This device may rot cat_ sp harmful interference, and
2. tic device must an except an intcrforocc received, i^c ILA Ind interference: hat may C3USC undesired operation.

ft 15.2′ Chzinoes or modification yarn na Any Changes or Toiifimtiors
Not. expensive approved by the Kett responsible for compliance co, Id NO d the Users authority to ccierate the equtiriert.
§ 15.10f. Infam-atich to the Lser.
Note This eminent -as been 1e5tei and found to cc ninolv Arth the limit fora Class B diar: a ce ‘lie Pursuant to rart15 of tie FCC Rules this lir is are Jest NEC ti 313Vide reasonable. tirbtectior aaainst harriiul interference in a resdental installation. This eaulornen: derates uses and can -radiate radio frequency ene-cry and It not is: ailed and used in accordance with the ins ructions nay cease harmful in reference to radio ronnunicalicn; Hoo-ver tiEfe i; no guarantee Ma’ int4rterence will not coin in a particular installation. It: his equipment does cause harmful in tglergrcetc rade or te1.41.ison -reception. which can Le determined by turning the tie exponent off and on. the user is encouraged to try to correct the r inference one. or more of The following measures:

• Reorient of relocating the receiving antenna
• Increase the separation between the Dqu print and receiver
• Conned the equipment no n option a c circuit dissident tram tat Sc whirr, the receiver is i: connected
• Gender the dealer nr a Rxpenenned rad nr-V technical ter help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>