hp 4102fdn LaserJet Pro MFP User Guide
- June 13, 2024
- HP
Table of Contents
HP LaserJet Pro
MFP 4102fdn
Setup Guide
Power on
Plug in and power on. On the control panel, choose your language and country/region.
Load paper
Load paper and
adjust the guides.
Note: If loading paper larger than A4, squeeze the latch at the back of
the tray and pull backward. Tray 2 will extend from the rear of the printer
approximately 0.39 inches (10 mm).
Connect printer
On the control panel, choose your connection method. If the printer will support multiple users, select Ethernet. Ethernet
- Connect an Ethernet cable from the printer to the same network as the computer.
- Press “OK” on the control panel to confirm the IP address. Then continue with the steps on the control panel until you reach the home screen.
USB
- Connect the USB cable to the port on the back of the printer and to the computer.
- Continue with the steps on the control panel until you reach the home screen.
Install printer software
- Go to hpsmart.com/download to download the HP software and print drivers.
- Install software and complete setup.
Get help with setup
Find setup information and videos online.
hp.com/support/ljmfp4101-4104
Printed in XXXXX / Printed in XXXXX / Printed in XXXXX / Printed in XXXXX /
Printed in XXXXX / Printed in XXXXX / Printed in XXXXX
© Copyright 2023 HP Development Company, L.P.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>