MR12VOLT P2000-2G26MD MOST CarPlay Interface User Guide

Audi MMI 2G HIGH
Quick User Guide
Model No : P2000-2G26MD
A6/C7
A8/D3
Q7/4L
Model No : P2000-2G20MD
A4/B8
A5/8T

P2000-2G26MD MOST CarPlay Interface

All you need to know before Installation

• Mr12volt interface emulates CD changer function of a Audi MMI radio and is connected through MOST bus of its function. once successfully installed, Mr12volt appears in CD7. ( Picture illustrated above)
• No coding is needed regardless of the MMI software version. And it works With or Without a CD changer,
• Note that it does not work on MMI 2G Basic radio ( Red & Black Display)

DIP SWITCH CONFIGURATION

Product Features

• CarPlay
• Android Auto
• Mirroring
• Music & Video Playback ( Through USB Flash )
• Bluetooth HF & Music Streaming
• Reverse Camera Input ( Support up to AHD720P )
• Front Camera Input
• Passenger Side L/R Camera Input ( For the use of Blind Spot )
• Reverse Grid Line
• Digital Sound Processor (DSP) with 15 Band Equalizer Adjustment
• Software Update available

Main Feature Operations

CarPlay/Android Auto

• Support both wired and wireless CarPlay Connection
• To connect to CarPlay wirelessly, both Bluetooth and Wi-Fi connection are required
• For wired CarPlay & Android Auto : Use a genuine cable to connect through the USB connector. Both Wi-Fi & Bluetooth connections are NOT required in this case.
• How to Connect CarPlay : Search for Mr12volt_xxxx and Pair to make a Bluetooth connection —> Turn on Wi-Fi and & Use CarPlay —> it will start CarPlay on your screen after few seconds, it could take longer for first time connection
• How to Connect Android Auto : Search for MR12volt_xxx and Pair to make a Bluetooth connection, Wi-Fi on phone will be on automatically and connected to Android Auto

Mirroring

iPhone

1. Disable CarPlay by turning off Bluetooth & Wi Fi Connection
2. Enter Mirroring menu on Car display and Choose iPhone
3. Turn on Wi Fi on phone connect network “carplay_xxxx” ( PW is 88888888)
4. Go to Apple quick menu bar, select Screen Mirroring and select Mirroring again
5. Phone display will appear on Car Display now

Android Phone

• It is necessary to install “MLink” application on your Android phone, it can be downloaded on www.mr12volt.com ( Go to SUPPORT —> Download —> P2000 mirroring)

• Both Bluetooth & Hotspot connection are needed at all time for mirroring

Hotspot Setting :

1. 5GHz band must be selected
2. Enter Mirroring menu on Car display and Choose “Android”
3. Network name & Password on phone must be set same as shown on Mr12volt “Mirroring” menu
4. Open MLInk app–>turn on Bluetooth and Hotspot
5. When both Bluetooth and Hotspot are successfully connected, phone display will appear on Car Display
   It is always best to open mirroring menu on car display prior to the connection of Bluetooth, so that Android Auto does not overtake the function of mirroring when first connected to Bluetooth

Bluetooth

• Phone contact list
• Contact history
• Dial Pad
• Audio Streaming

BT Hands-free

• When a call is received, answer and reject button will appear on display, use MMI/i-Drive/Rotary button to select.

• Audi factory Bluetooth HF and Mr12volt Bluetooth can be connected at the same time. (see below picture) When both are connected and a call is received, Audi HF will take over Mr12volt HF and it can be answered through phone  button on steering wheel.
  

• Mr12volt Does not support the integration of OEM microphone even with the installation of a Y-cable. if you need to use Mr12volt HF or Voice Command such as SIRI, the 3.5mm jack microphone supplied in the package must be  installed.

Car Settings

Car Setting

“Reverse Camera” settings

• OE Camera (Default) – Select this when car is fitted with factory camera
• After Market 360 – Select this when car is installed with a aftermarket camera ( support up to AHD720 only)

“Reverse condition” settings

• Gear Position (Default) – Detects through CAN bus when reverse.
• Reverse state – Detects through 12v reverse light signal when reverse (requires the manual wiring connection of a car reverse signal)

When do i select “Reverse State” ?
Mr12volt detects car CAN bus with most of the car models in the market, however in some cases particularly in older generation cars, when a CAN bus can’t be detected, it is necessary to manually detect camera through car reverse light signal.
(Refer to the AUDI MMI 2G Installation Diagram for more details ) “Starting front view” – Front Camera timer setting with 5s, 10s, 30s

“Dedicated right view” – L/R Side camera setting (Blind Spot camera)

• Can Active – Detects through CAN bus
• 12v Active – Detects through 12v side L/R light

“Reverse track” – Option to turn ON or OFF of a Parking Grid (For After Market camera only)
“Reverse radar” – Option to turn ON or OFF of a Reverse Sensor (For After Market Reverse sensor only)

Sound Settings

Sound Settings

• DSP Built-In
• Bass/Mild/Treble level adjustment with 15 bars customization
• Factory default at Flat
  

USB Supported Formats & Other Specs

Music and Video Playback File Format

• USB file File Format FAT12, FAT32
• Support USB2.0 , Hard disk memory
• Supported music format : MP3, WMA, AAC, AC3, DTS, OGG, FLAC, APE, AMR
• Supported video format : mkv, mp4, avi, wmv, rmvb, rm, mpg, mpeg, ts, dat, asf, flv, vob
• Supported Photo format : BMP, JPG, GIF, PNG
• DOES NOT support folder management when browsing USB Music and Video files

Other Data

• Support Phone Charging through USB connector @ 500mAh
• Support Hi-Resolution Loss-less Apple music wirelessly

FAQ

Q : I have a MMI 2G Basic, does it work?

A : It does not MMI 2G Basic, It works on MMI 2G High only.

Q: I have a BOSE system, does it work?

A: It works on all sound systems regardless its BOSE, B&O or Standard system.

Q: Do i need any coding or software update?

A: No coding or software update is needed.

Q: Do i need to disable my 6CD changer?

A: It is not necessary to remove CD changer, it can be installed and connected within the MOST bus.

Q; Can i use my Audi MMI Bluetooth HF while connected to Mr12volt Bluetooth?

A: Yes, they can be connected at the same time, Audi factory HF will take over Mr12volt when a call is received and it can be answered through phone button on steering wheel.

Q; I have a Factory microphone in my Audi Car, can i connect this to Mr12volt instead of the microphone in the package.?

A: NO, Mr12volt Does Not support the integration of OEM microphone even with the installation of a Y-cable. if you need to use Mr12volt HF or Voice Command such as SIRI, the 3.5mm jack microphone supplied in the package must be installed.

References

• Mr12Volt Car Interface
• Mr12Volt Car Interface

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>