CONTIXO SC7 RC Off Road Truck User Manual
- June 13, 2024
- CONTIXO
Table of Contents
CONTIXO SC7 RC Off Road Truck
*product colors may vary
PLEASE READ THIS MANUAL BEFORE USING.
PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE
Product Information:
The All-terrain Off-road Truck SC7 is a remote control car equipped with a spray function. It is designed for off-road use and provides an exciting and interactive experience. The car comes in various colors.
Remote Control:
The remote control is used to operate the All-terrain Off-road Truck SC7. It allows you to control the movement of the car and activate the spray function.
How to Use:
To activate the spray function, open the water injection port at the rear of the car. Use the equipped water injection device to inject clean water into the port. When you click the spray button on the remote control or when the car is hit by another remote control car, the SC7 will automatically spray water.
Battery Installation:
To install the SC7 battery:
- Use a screwdriver to remove the battery cover.
- Insert the battery into the designated compartment with the correct polarity.
- Replace the battery cover and screw it back into place.
- When removing the battery to charge, make sure to unclasp the connector before pulling it off.
To install the remote control battery:
- Use a screwdriver to remove the battery cover.
- Insert the battery into the designated compartment with the correct polarity.
- Replace the battery cover.
Battery Warnings:
- Do not mix old and new batteries or different types of batteries.
- Remove the batteries if the product will not be used for an extended period.
- Dispose of used batteries properly and immediately.
Battery Charging:
- Connect the charging cable to the charging port of the SC7.
- Plug the other end of the charging cable into a compatible charger (5V 1A charger recommended, not included).
- The charging indicator light will turn on to indicate that the battery is being charged.
- Do not charge the battery for longer than the recommended charging time.
Recycling:
When disposing of the product, please follow local regulations and recycle it properly to minimize environmental impact.
Charging Time:
The recommended charging time for the SC7 is not specified in the provided information. Please refer to the detailed user manual or contact customer support for specific information regarding charging time.
PLEASE READ THIS MANUAL BEFORE USING.
PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE
Remote Control
How to use
Spray Function
Open the water injection port at the rear of the car, and use the equipped water injection device to inject clean water. When you click the spray button or the remote control car is hit by another remote control car, the remote control car will spray automatically
Battery Installation
SC7 Battery Installation
- Use a screwdriver to remove the battery cover.
- Attach the battery to the connector.
- Replace the battery cover and screw back into place.
*When removing the battery to charge, take care to unclasp the connector before pulling it off
Remote Battery Installation
- Use a screwdriver to remove the battery cover.
- Place two AA’s with the corresponding polarities as labeled on the unit.
- Replace the battery cover and screw back into place.
Battery Warnings
- There is a certain risk of using lithium batteries, which may cause significant damage to people and property. The end user must use it carefully and bear all the related responsibilities.
- If the battery leaks, avoid contact with skin and eyes. If contact with skin occurs, wash with soap and water immediately. If contact with eyes occurs, rinse immediately with cold water for at least 15 minutes, and seek medical attention.
- If the charger begins to emit a suspicious odor, noise, or smoke, unplug the power supply immediately.
Battery Charging
- The light turns on when charging and turns off when it is fully charged.
- Use only the original factory cable. Do not use damaged or cable of other brands.
- Do not charge expanded, leaked, or damaged batteries.
- Do not overcharge the battery. When the battery is fully charged, unplug the device.
- Do not charge near inflammable materials (eg. carpets, wood flooring, solid wood furniture, etc.).
- Do not charge the battery immediately after it has become hot.
- The charging temperature of the battery should be between 0-40°C (32-104°F).
- Recommend using a 5V 1A charger (Not included) for charging.
Recycling
This equipment consists of electronic components or batteries. For electronic waste, please dispose of according to local waste disposal laws and ordinances.
Charging Time
New Battery needs to be fully charged for 210 minutes and use time is up to 30 minutes.
CONTACT INFORMATION
E-Mail: support@contixo.com
Website: www.contixo.com
©2021 Contixo Inc. All rights reserved. Con?xo®, the Con?xo logo and
associated characters, trademarks and design elements are owned and licensed
by Contixo Company.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>