HILTI SI-AT-22 Cordless Impact Drivers Instruction Manual
- June 13, 2024
- HILTI
Table of Contents
HILTI SI-AT-22 Cordless Impact Drivers
Product Information
- Product Name: SI-AT-22 Chemical Anchors
- Product Model: SI-AT-22 A3
- Product Code: 2410583-09.2023
- Package Contents: SI-AT-22 Chemical Anchors, HAS-U A4 M12, VHF
Product Usage Instructions
- Ensure the surface where the chemical anchors will be applied is clean and free from any debris.
- Take out the SI-AT-22 Chemical Anchors from the package.
- Insert the HAS-U A4 M12 into the designated hole on the surface.
- If necessary, use the VHF to secure the chemical anchors in place.
- Repeat steps 1-4 for additional chemical anchors as needed.
- Make sure all chemical anchors are properly installed before proceeding.
- Verify that the chemical anchors are securely fixed to the surface.
- Follow any additional instructions provided in the user manual for specific applications or requirements.
Note: Please refer to the complete user manual for detailed instructions and safety precautions when using SI-AT-22 Chemical Anchors.
Hardware Overview
Usage Instruction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>