Yale 05072022 Digital Padlock User Manual
- June 13, 2024
- Yale
Table of Contents
User Manual
Yale Digital Padlock
Part of ASSA ABLOY
Product Features
Note: Please note that this user manual is compatible for different models of digital padlock. Please refer to the actual product for the appearance.
- The Yale Digital Padlock is charged by USB cable. Please fully charge the product before using it for the first time.
- Supports up to 20 fingerprints: Fingerprints 12 is the administrator, fingerprints 3 20 is the ordinary user.
- Once either of the administrator fingerprints is deleted, the product will be restored to factory default mode, deleting all fingerprints.
- There are no registered fingerprints for factory default mode, therefore the Yale Digital Padlock can be unlocked by any fingerprint until it is set up.
Indicator Lights
Color | Mode | Meaning |
---|---|---|
Light off | Off | Fully charged |
Red | On | 1.Deleting fingerprint mode |
2.Charging
Flashing| 1.Failed to verify fingerprint
2.Low power
Green| On| Fingerprint verification successful
Flashing| Registration mode / Unlock
Blue| On| Administrator fingerprint authorization
Flashing| Unlock (factory default mode)
Registration: 1st Fingerprint
Note:
-
1st fingerprint will be recognised as administrator.
-
Please avoid accidental registration for the first fingerprint.
-
Unlock the padlock using any finger, press the intended fingerprint for registration for 8 seconds until the blue light is always on.
-
Press the sensor with the same finger to start registration until the green light flashes. Repeat 4 more times (for a total of 5 times).
*If registration has failed, the red light flashes instead of green light
Registration: 2nd to 20th Fingerprints
Note: Registering new fingerprints requires the administrator’s fingerprint authorization. 2nd fingerprint is also an administrator, 3rd to 20th fingerprints are normal users.
- Unlock the padlock, press the administrator fingerprint on the sensor for 5 seconds until the blue light is always on.
- Press the new finger for registration against the sensor to start registration until the green light flashes. Repeat 4 more times (for a total of 5 times).
*If registration has failed, the red light flashes instead of green light
Restore to Factory Default Mode
Note: Deleting fingerprints requires either one of the administrators’ fingerprint authorization. Be sure to restore the lock to factory default mode if you need to return it.
- Unlock the padlock, press the administrator fingerprint on the sensor for 8 seconds until the red light is always on.
- Press the sensor once again and the green light will light up.
- All fingerprints are now deleted successfully and the padlock has been restored to factory default mode.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>