JUEMEI ND-2301 Sleep Tracker Instructions
- June 13, 2024
- JUEMEI
Table of Contents
JUEMEI ND-2301 Sleep Tracker
Sleep Tracker Instructions
Product Presentation
The Intelligent Sleep Instrument (Bluetooth + WIFI 2-in-one version) uses
the WeChat applet for operation. To access the WeChat applet, scan the
provided QR code using WeChat.
Installation Guide
Spread the intelligent sleep monitor under the sheet or mattress (up to 5
cm thick). The user should lie directly above the chest and abdomen of the
sleep monitor.
WeChat Applet Setting
- Bind your mobile phone and authorize WeChat. In the WeChat applet, go to “My” and enter the Settings interface. Click on “Click authorization” and confirm authorization to bind your mobile phone number.
- Check the WeChat login phone number, click “allow”, bind the phone number, and authorize WeChat.
- Select the corresponding sleeper version.
- Click “Add Scene”. Enter My Scene, click “Add Scene”, click “allow” and open the Bluetooth of your mobile phone. Enter the scene name and the sleep instrument SN binding.
- The scene name can be freely input (e.g., home, company, etc.). The sleep instrument SN consists of 12 digits and can be found on the monitoring label of the sleep monitor.
Bluetooth Distribution Network
Before starting the WeChat applet Bluetooth distribution network, make sure
your mobile phone is connected to the 2.4G router WiFi (switch to 2.4G mode if
using 5G WiFi). Enable Bluetooth on your mobile phone and ensure the
monitoring belt or gateway of the intelligent sleep instrument is powered on.
Go to WiFi connection under the My interface, wait for the sleep instrument to
be found, and then click Connect sleep instrument. Enter the WiFi password and
click to connect. Wait for the page to display “Start in the distribution
network…” If the network connection fails
- Confirm that the WiFi password is entered correctly.
- Verify that the 2.4G router WiFi is connected.
- Turn off the WeChat applet, mobile phone Bluetooth, and sleep instrument power. Wait for one minute, then turn on the mobile phone Bluetooth and positioning. Open the WeChat applet and repeat the above distribution network steps.
Note: Bluetooth distribution network notes
- Turn on Bluetooth on your phone.
- Enable GPS positioning.
- Cancel the paired sleep instrument from your mobile phone Bluetooth settings.
- For Android phones: Enable WeChat Bluetooth authorization in the WeChat applet.
- For iPhones : Enable Bluetooth in WeChat settings.
- If the distribution network is successful and the network is normal, the LED light of the sleep instrument will be off. If the LED light flashes continuously, it indicates that the distribution network was unsuccessful or there is a network abnormality after success.
WeChat Applets Usage
- After successfully setting up the WeChat applet distribution network, lie on the monitoring belt and click “real-time heart rate” to view the current heart rate and breathing rate.
- To view sleep parameters recorded throughout the night, click on the report interface after waking up (ensure the device remains powered on for at least 5 minutes). Click on the parameters and explore sleep habits, sleep efficiency, sleep stability, heart rate, breathing rate, and more by clicking on the small question mark icon next to each parameter.
product presentation
- The Intelligent Sleep Instrument (Bluetooth + WIFI 2-in-one version)
- Intelligent sleep instrument uses WeChat applet, use WeChat to scan the following “WeChat applet QR code” into the WeChat applet.
Installation guide
2.1 Please spread the intelligent sleep monitor under the sheet, or the mattress (within 5 cm thick), and the user lies directly above the chest and abdomen of the sleep monitor.
WeChat applet setting
- Bind the mobile phone and authorize WeChat. After entering the WeChat applet, click “My” to enter the Settings interface, and click the “Click authorization” and “confirm authorization” page to set the mobile phone number binding.
- Check the WeChat login phone number, click “allow”, bind the phone number, and authorize WeChat.
- Select the corresponding sleeper version
- Click “Add Scene”
- Enter “My Scene”, click “Add Scene”, click “allow” and open the Bluetooth of the mobile phone, enter the scene name editing, and enter the sleep instrument SN binding.
- The scene name can be freely input (such as home, company, etc.). The SN of the sleep instrument has 12 digits, and see the monitoring label of the sleep monitor for details.
Bluetooth distribution network
Before the WeChat applet Bluetooth distribution network, please confirm that
the mobile phone has been connected to the 2.4G router WiFi (5G mode WiFi
please switch to 2.4G), the mobile phone Bluetooth has been opened, the
monitoring belt or gateway of the intelligent sleep instrument is powered on,
click “WiFi connection” under the “My” interface, wait for the search sleep
instrument, then click “Connect sleep instrument”.
- Enter the WIFI password, click to connect, prompt ” Start in the distribution network…”
- Wait for the page to prompt “connected”, if the network fails
- Confirm that the WIFI password is entered correctly;
- Verify that the 2.4G router WIFI is connected;
- Turn off the WeChat applet, turn off the mobile phone Bluetooth, the sleep instrument power off, one minute later, turn on the mobile phone Bluetooth and positioning, enter the WeChat applet to repeat the above distribution network steps.
Note: Bluetooth distribution network notes
- Turn on Bluetooth on your phone
- Open GPS positioning;
- Mobile phone Bluetooth cancels the paired sleep instrument;
- Android phone: WeChat Bluetooth authorization of WeChat applet; Iphone: Wechat turns on Bluetooth in the Settings;
- The distribution network is successful and the network is normal, and the LED light of the sleep instrument is off, otherwise the LED light of the sleep instrument flashes continuously, indicating that the distribution network is unsuccessful, or the network is abnormal after success.
We Chat applets to use the display
- After the success of the WeChat applet distribution network, people will lie on the monitoring belt and click “real-time heart rate” to show the current heart rate and breathing rate.
- sleep a night, get up after 5 minutes in the morning (equipment please don’t cut off power), click on the “report” interface, You can see the sleep parameters reported throughout the night, click on the parameters, such as “sleep habits” on the right of the small question mark, enter the details page, can see sleep habits, sleep efficiency, sleep, stability, heart rate, breathing rate details page.
- Enter the “Discovery” page to play helpful music to help you sleep.
FCC WARNING
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>