Shenzhen Pannizhe Technology PL-002 Bluetooth Speaker User Manual

June 4, 2024
Shenzhen Pannizhe Technology

Pannizhe Technology PL-002 Bluetooth Speaker
User Manual

Thank you for choosing our Bluetooth lighting speaker. Please read this manual before use, and use it correctly to activate its superior performance The gorgeous design of the  Bluetooth lighting speaker makes it fashionable, and the sound quality is pure. The design of the speaker integrates multi- functions, with a leading electro-acoustic technology  system, letting you enjoy the marvelous music experience at any time, anywhere
We reserve the right to final interpretation of this manual


a. Do not expose this product to a humid environment
b. Do not disassemble, repair or modify the product by yourself
¢. Please use and store the product in a normal temperature environment
d. Do not drop or throw the product, avoid damage caused by dropping
e. Please use the rated voltage charger for charging;
f Unauthorized disassembly will invalidate the warranty
g Long time listening at a high volume may cause hearing damage, it is recommended to avoid excessive volume


  1. There is a risk of explosion if the battery is not replaced properly, it can only be replaced with the same type of battery
  2. The battery must not be exposed to overheated environments such as sunlight, fire, etc

Bluetooth Speaker Accessories

Your Bluetooth lighting speaker includes the following accessories

Shenzhen Pannizhe Technology PL 002 Bluetooth Speaker - Fig


  1. Bluetooth music play(rue Wireless Stereo)
  2. Bluetooth automatic reconnect function
  3. Outdoor/Indoor use
  4. Supports TF card expansion(Max 64GB)
  5. Microphone usable
  6. Support audio input
  7. Support light color change

Product parameters

External interface TYPE – C charging port TF card slot Aux port, USB Port.
Product specification About 2578212280mm

Power parameters

Rated voltage DC11.1V
Built-in lithium battery 11.1V/2500mAh
Bluetooth frequency 24GHz
Charging voltage DC- 5V 2A
Charging time About 4 hours
Audio playback time 5 hours in medium volume
Frequency Response 50Hz-10kHz
Microphone UHF

Basic parameters

Maximum Output Power 30w
Signal-to-noise ratio ≥90db
Battery Capacity 2500mAh
Distortion (THD) ≥1%
Speaker Specification 147mm 40 30W
Sound Channel Mono soundtrack
Tr Support Music Format MP3 WAN APE FLAC
Transmission Distance 8-10m (depending on environmental factors and Bluetooth

Bluetooth5.0| Bluetooth protocol A2DP/AVRCP/HSF
Product Type| Color charging light Bluetooth Speaker
Function Features| Bluetooth, colored lights, high
Power speakers, microphone
Storage Type| TF card(max 64G8)
Maximum Sound Pressure| >113db 1KHz 1HB<1%

Buttons and functions

Shenzhen Pannizhe Technology PL 002 Bluetooth Speaker - Fig

  1. power
    Long press for 3 seconds to switch or/off, short press to switch or/off the LED light, press twice to switch the LED to flash with the rhythm of the music

  2. Mode
    Short press to switch the mode between TF card/AUX/Bluetooth. Long press to switch Indoor/Outdoor mode. Press twice to the mode of microphone volume adjustment.

  3. Next
    Short press for next song, long press for volume up

  4. previous
    Short press for previous song, long press for volume down

  5. Play/Pause
    Short press to play/pause, long press for Bluetooth TWS pairing or
    disconnection. Press twice to turn on/off the accompaniment mode
    eliminate vocals and play the accompaniment

  6. TF card slot
    Insert IF card and play

  7. AUX audio input
    Plug in the AUX audio cable, automatically into audio input mode, play the sound of a mobile phone or PC

  8. Charging port
    Support DC 5V/2A charging

TWS Instructions

To use the TWS function you must have two same models, turn on both speakers, long press the Play/Pause button of one of the speakers, then hear the painting beep tone.  Waiting for the other speaker connects, there will be a prompt tone when two speakers connect successfully. At this time, you can turn on the Bluetooth of your phone to pair the speaker (PL-002). Both speakers will play the sound of the phone after a successful connection. Long press the Play/Pause button to disconnect two speakers.
If two speakers are not manually disconnected, they will automatically reconnect

Before the TWS pairing, the Bluetooth output device(cellphone, PC, etc.) should not be connected to any of the speakers, you should first complete the TWS pairing and then connect the device to the speakers, otherwise, you can not use the TwWS  function

Bluetooth mode

  1. Long press the power button for about 3 seconds to turn on the speaker with the colorful light on, the Bluetooth is in the pairing mode
  2. Turn on the Bluetooth of your device. Select ‘PL-002’ and connect. If a password is needed, please enter ‘OOOO’. There will be a prompt tone if paired successfully
  3. The Bluetooth painting is only required for the first use. In later use, the speaker will automatically connect to the last connected device

TF card mode

Insert a TF card when the speaker is on, the speaker will switch to TF card mode automatically. The format of the audio files in the TF card must be MP3, WAV, APE, or  FLAC. The LED lights will flash with the rhythm of the music when playing


Turn on the microphone and it will automatically pair with the speaker. Press the M Button twice to enter the microphone volume adjustment mode, Long press the Next or  Previous buttons to adjust the microphone volume.

Accompaniment mode

When playing songs, press the Play/Pause button twice to eliminate the vocal of the songs and play the accompaniment. Press twice again to recover

External audio AUX input mode

Plug the 3.5mm Aux cable into the Aux jack, the other side connects to the output device(cellphone, PC, MP3, etc.), the speaker will automatically switch to external audio  AUX input mode and play the sound of the device

Indicator light status

Colorful light mode: color changing
Charging indicator The red light on when charging, and off when fully charged
Applicable environment
Usage environment. Temperature(0C-40) Humidity(0-856RH)
Storage Environment Temperature(30C-60C) Humidity(0%-906.RH)


Problems Solution
Connection or pairing unsuccessful cRoedsteaortotohoe speaker or enter the
Intermittent when playing music Whether the connection distance is out of

range or there is an obstacle between the speaker and the device
Play without sound| Check if the speaker is the smallest volume
Unable to turn on the speaker| Check if the speaker is charged
The power light does not light up| Check whether the charging cable is plugged in
No sound from the microphone| Check the battery of the microphone
Squeaking| Keep a certain distance between the microphone and the speaker
The microphone signal receiving distance becomes shorter| Check whether there is interference, and adjust the distance of the microphone when using

Warranties and after-sales service:

  1. The product is provided with at least 12 months of warranty and lifelong technical support
  2. Within 30 days from the date of purchase, products in good packaging and without damage can be returned and fully refunded. Please noted that customers will bear the  shipping fee if products have no quality problems
  3. Free exchange for products having quality problems within 12 months
  4. If you are not 100ii satisfied with our products, please feel free to contact our customer service. We attach great importance to customer feedback and will get back to you  within 24 hours(excluding weekends)

FCC Statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet the general RF exposure requirements. The device can be used be in portable exposure without restriction.

Read User Manual Online (PDF format)


Download This Manual (PDF format)

Download this manual  >>

Shenzhen Pannizhe Technology User Manuals

Related Manuals