Grouw 17935 Robotic Lawnmowers User Guide
- October 31, 2023
- Grouw
Table of Contents
Grouw 17935 Robotic Lawnmowers
Bluetooth guide
Set up your robot lawnmower wirelessly
via Bluetooth
-
Scan this QR code to download and install the free app on your smartphone or tablet.
-
Complete the app installation and turn on the robot lawnmower.
-
Connect the robot lawnmower to your smartphone or tablet via Bluetooth. Follow the instructions provided in the app.
-
Update the robot lawnmower’s firmware wirelessly via Bluetooth The app automatically checks the robot lawnmower’s firmware version. If a new firmware version is available, you can tap the “Update Mower’s Firmware” button on the “Settings” page. You should then update the robot lawnmower’s firmware by following the steps below.
Step 1:
Operating the robot lawnmower
Set the main power switch to the ON position but do not turn on the robot
lawnmower on the control panel.
Press the POWER and OK buttons at the same time. All the indicator lights
light up green.
Step 2:
Operation in the app
Open the app and connect the robot lawnmower to your smartphone or tablet via
Bluetooth.
Tap “Update Mower’s firmware” on the “Settings” page.
Step 3:
Operating the robot lawnmower
Press the START/2 button to start the firmware update.
When the update is complete, the robot lawnmower restarts automatically.
Note!
- The update takes around 4-6 minutes.
- Make sure the battery is at least 50% charged before starting the update.
- Do not press the main power switch while updating the robot lawnmower.
