Inday VDA-1 Video Coax Distribution Amplifier Instruction Manual
- June 13, 2024
- Inday
Table of Contents
Inday VDA-1 Video Coax Distribution Amplifier
Product Information
| Brand | Multimedia Products |
|---|---|
| Address | 1818 NE 140th Portland, OR 97230 |
| Contact Number | 503-575-1951 |
| support@inday.com | |
| Website | www.inday.com |
| Model | VDA-1 |
| Description | Video/Coax Distribution Amplifier |
| Features | – Video or Coax Digital Audio Splitter: 1 IN to 4 OUT |
– Very Wideband Amplifier Circuit will not degrade the source
– Guaranteed Frequency Response > 120MHz
– Broadcast specs. .04% differential gain, .03% differential
phase
– Each output has its own High Current Cable Drive
Suitability| The VDA-1 is suitable for Coax Digital Audio or any format
Analog Video signal from low resolution NTSC to HDTV. Its wide
bandwidth, flat frequency response, and High Current outputs allow
it to drive very long cables, up to 500 feet (150 meters).
Typical Application| DVD
Specifications| | INPUTS| 1 RCA Gold Plated
---|---
| Accepts Coax SPDIF format Audio or Analog Video signal (PAL,
NTSC, HDTV).
OUTPUTS| 4 RCA Gold Plated
POWER| 12VDC-Unregulated Nominal @ 80ma Max. Wall Transformer
supplied
DIMENSION| 4W x 2.5L x 1H
TEMPERATURE| 0 to 50 degrees Celsius
HUMIDITY| 0 to 90% (non-condensing)
Product Usage Instructions
To use the VDA-1 Video/Coax Distribution Amplifier, follow the steps below:
- Ensure that the VDA-1 is connected to a power source using the provided wall transformer.
- Connect your input device (such as a DVD player) to the VDA-1 by using an RCA cable. Plug one end of the RCA cable into the “INPUTS” port of the VDA-1, and the other end into the corresponding output port of your device.
- Connect up to four output devices (such as TVs or monitors) to the VDA-1. Use RCA cables to connect each output device to one of the “OUTPUTS” ports on the VDA-1.
- Ensure that all connections are secure.
- Power on the VDA-1 and your input and output devices.
Note : The VDA-1 can be used with Coax SPDIF format audio or analog video signals. It supports various formats including PAL, NTSC, and HDTV.
Video/Coax Distribution Amplifier
- Video or Coax Digital Audio Splitter: 1 IN to 4 OUT
- Very Wideband Amplifier Circuit will not degrade the source Guaranteed Frequency Response > 120MHz
- Broadcast specs. .04% differential gain, .03% differential phase Each output has its own High Current Cable Drive
The VDA-1 is a multipurpose utility distribution amplifier. Suitable for Coax
Digital Audio or any format Analog Video signal from low resolution NTSC to
HDTV.
Its wide bandwidth, flat frequency response and High Current outputs allow it
to “Drive” very long cables, up to 500 feet (150 meters).
Specifications
INPUTS
- RCA Gold Plated Accepts Coax SPDIF format Audio or Analog Video signal ( PAL, NTSC, HDTV).
OUTPUTS
- 4 RCA Gold Plated
POWER
- 12VDC-Unregulated Nominal @ 80ma Max. W Trall ansformer supplied
DIMENSION:
- 4″W x 2.5″L x 1″H TEMPERATURE
- 0 TO 50 DEGREES C HUMIDITY
- 0 TO 90% (non-condensing)
Typical Application
Multimedia Products
1818 NE 140th Portland, OR 97230
503-575-1951
support@inday.com
www.inday.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>