Inday TLDA1 Toslink Distribution Amplifier Instruction Manual
- June 13, 2024
- Inday
Table of Contents
Multimedia Products
1818 NE 140th
Portland, OR 97230
503-575-1951
support@inday.com
www.inday.com
Toslink Distribution Amplifier
Model: TLDA1
Toslink Splitter: 1 IN to 4 OUT
Optically isolated inputs and outputs.
Not a passive splitter. Will not degrade the source signal
Shutters on inputs and outputs. No Toslink Plugs
Each output has its own Fiber Optic Transmitter
The TLDA1 is a fully active device. What this means is the Input is converted
from optical back into electrical and then sent to 4 independent To slink
Transmitters. This ensures that ONE bad fiber cable will not destroy your
signal.
Specifications:
INPUT:
1 Toslink w/Shutter
Accepts any standard SPDIF format
All OUTPUTS:
4 Toslink w/Shutters
POWER:
12VDC-Unregulated Nominal
@ 60ma Max.
Wall Transformer supplied
DIMENSION:
4″W x 2.5″L x 1″H
TEMPERATURE
0 TO 50 DEGREES C
HUMIDITY
0 TO 90% (non-condensing)
Typical Application
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>