Yuytin

Yuytin Digital Kitchen Balance Electronic Food GLASS TRAY

INTRODUCTION

The digital kitchen scale has four highly accurate sensors with 1 gram accuracy. You can weigh food, ingredients, rice, flour, milk, water, and fruit using this balance. With the help of this kitchen electronic balance, you will gain a lot of experience in the oven while baking and cooking. An overload and low battery indicator, a tare function, and separate on/off button operations are all features of this electronic balance. The G, OZ, LB, and KG units are supported by the kitchen balance. The “Tare” key can be used to reset the current weight to 0g after changing the weight’s unit of measurement with the “Unit” key. By holding down the “Hold” button for 5 seconds, the current weight can be seen. Use a smart kitchen scale to launch your ketogenic lifestyle.

5 kg (11 lb.) is the greatest weight that can be weighed, which is nearly enough for all weighing requirements when cooking food. Our electronic scales come with a glass removable tray that gives them a distinctive and attractive appearance in a contemporary kitchen setting. The lifespan can be increased by the separate on/off button and automated stop design. The kitchen scale will stretch on its own after 60 seconds of inactivity. The electronic scales can be used for extended periods of time thanks to the replaceable integrated 1x3vcr2032 lithium battery. We take full responsibility for the kitchen scales’ quality and provide a satisfying one-year warranty, in addition to after-sales support and technical assistance. Advice: To increase the battery life of digital scales, insulate the battery with electronic balance-blocking paper.

SPECIFICATION

• BRAND: Yuytin
• WEIGHT LIMIT: 11 Pounds
• MATERIAL: Glass
• DIMENSIONS: 8.27 7.56 1.77 inches
• WEIGHT CAPACITY: 11 lb. / 5 kg with a division of 0.1 OZ / 1 g

HOW TO RESET

Remove the battery, wait a minute, and then reinstall it to calibrate the scale. Press and hold the ON/OFF/TARE button until the display turns off.

HOW TO CHANGE UNITS

• weighing one’s might.
• To switch between weighing modes, use the [UNIT] or [MODE] key.
• Press the [UNIT] or [MODE] key to switch between units until you locate the proper weighing mode.
• As usual, weigh the things.

HOW TO KNOW IF SCALE IS BROKEN

• Unreliable Scale Readings:
• Between-scale reading errors: …
• Uncertain Readings:
• Presentation Readability:
• Damage from corrosion or rust.

HOW TO FIX A SCALE THAT IS OFF

Reinstall the fresh batteries, lightly sand the contacts in the battery box, and then try turning the scale on once more. Please get in touch with us if this does not restore your scale so we can discuss other options.

HOW TO KNOW IF SCALE IS WORKING PROPERLY

• Put a single item on the scale. Observe the weight. Remove it to allow the scale to return to normal.
• The scale is accurate if the numbers line up. If it doesn’t, try it once more to determine if the error is the same number. If it is, your scale might always be off by that amount.

HOW TO CALIBRATE

Choose a weight and place the digital scale on a flat surface to calibrate it. Start the scale’s calibration process after turning it on. Place the weight on the scale, then watch as it determines your total weight. Press the calibration button and wait for it to recalibrate if the weight is off.

FAQs

Why isn’t my kitchen scale digital working?

Additionally, make sure the legs or grips below are clean and well adjusted. The battery should also be checked because this issue could indicate a worn- out battery. Check to see whether the issue still exists after replacing the battery. One of the most likely reasons for an unsteady scale reading is a low battery or a worn-out battery.

Are kitchen scales calibrated before use?

In order to achieve accurate readings and exact measurements, it’s crucial to calibrate your digital scale frequently.

Can a digital scale that weighs be repaired?

To ensure uncompromised performance and optimum output, every manufacturer requires routine calibration and maintenance.

Scales affected by low battery?

When taking measurements on digital scales, low battery power and bad battery connections are the main causes of scale malfunction and erroneous readings. It is crucial that the scale’s components receive the necessary amount of electricity for precise measurements.

Do digital scales progressively lose accuracy?

Over time, electronic scales’ circuitry could malfunction, resulting in loss of accuracy. Even brand-new scales may become unreliable under certain circumstances, particularly in cases of intense heat. Because of this, the most precise scales will be stable at high temperatures.

Why do the readings on my scale vary?

The scale may provide erroneous readings if there is an imbalance in the weight that is being put on it. The scale may give an incorrect reading, for instance, if there is a heavy object on one side of the scale and a light object on the other.

What exactly has a mass of 200 gram?

Additionally, a full cup of uncooked rice weighs roughly 200 grams, as do two cups of nuts. Unless it’s sugar or rice, keep in mind that a cup of something won’t always weigh 200 grams because some things weigh more or less. For instance, a cup of flour weighs much less.

How is a scale zeroed out?

In order to tare or zero your scale: Simply click the ON/OFF button to reset the scale to zero if it does not show zero weight when it is turned on and nothing is placed on it.

How can a kitchen scale be converted to grams?

To switch between kg/g and lb./oz. while in weight mode, push the unit conversion button on the scale’s rear. For three seconds, hold down the ZERO/MODE button to switch between measuring weight (kg/g or lb./oz.) and volume (ml/oz.).

Why is my electronic scale so inaccurate?

Your machine may start to provide erroneous and inconsistent readings if it isn’t receiving the electricity it requires to function. Make sure the batteries are connected completely and are producing adequate power by checking them. A fresh set of batteries can also be tested to determine if they offer your digital scale the boost it need.

Why doesn’t my food scale read correctly?

If your scale is lying on an uneven, slanted, or rounded surface, it may display irregular readings even if it is calibrated. To settle the scale and guarantee accurate readings each time, place a mouse pad or static-reducing pad on a level, firm surface underneath the scale.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>