RAPTIC XD51346 Air Tag Housing with Carabiner User Manual
- June 15, 2024
- RAPTIC
Table of Contents
RAPTIC XD51346 Air Tag Housing with Carabiner
Product Information
Specifications
- Default Combination: 0-0-0
- Lock Type: Carabiner
Product Usage Instructions
How to Use
- Press button (A) to release and open the latch.
- Remove the AirTag housing (B).
- Press button (A) to release and open the latch. Remove AirTag housing (B)
- Twist to separate the top and bottom housings. Place AirTag between housings.
- Assemble top and bottom housings around AirTag. Rotate to lock housings together.
- Place AirTag housing into the carabiner; Make sure to align the dot on the housing to the corresponding dot on the carabiner.
- To lock the carabiner, close the latch and rotate the digits to secure the lock.
How to Change Lock Combination
- The default combination is 0-0-0.
- Release the latch.
- Rotate the number dials to align them with the dot on the housing.
- Depress the reset pin fully with a paperclip or similar object
- While keeping the pin depressed, rotate the numbers to your desired combination
- Finally, press the pin from the backside to confirm the new combination and set it.
- To change the combination, depress the reset pin fully with a paperclip or similar. Keep the pin depressed and rotate numbers to the desired combination.
- Finally, to set the combination, press the pin from the backside to confirm the new combination.
Additional Tips
To assemble the top and bottom housings:
- Twist to separate the top and bottom housings.
- Place the AirTag between the housings.
- Assemble the top and bottom housings around the AirTag.
- Rotate to lock the housings together.
To lock the rifle
- Place the AirTag housing into the carabiner.
- Close the latch and rotate the digits to align the dot on the housing with the corresponding dot on the carabiner.
- Make sure to secure the lock to ensure proper locking.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>