TARAMPS FH-80D-6POL 6 Inch FH 80D Instruction Manual
- June 13, 2024
- TARAMPS
Table of Contents
TARAMPS FH-80D-6POL 6 Inch FH 80D
Overview
The FH 80D was carefully designed to work with a wide response, adapting to the most varied types sound systems, standing out in the mid-bass to the high frequencies with excellent acoustic performance, using components such as a cellulose cone whizzer that contributes to this product reaching an excellent result, that is, a frequency response from l00hz to 17.S00hz. Live a new experience listening to your playlist with a fidelity that will amaze your ears.
ELECTRICAL PARAMETERS
- RMS POWER 40 W
- MUSICAL PROGRAM POWER BOW
- NOMINAL IMPEDANCE 4 orB Ohms
- RESISTANCE 3,0 / 6,3 ohmsNCC
- NO (EFFICIENCY REFERENCE) 0,796%
- SENSITIVITY(@ 1W, 1 m)-Free-Air 91,029 dB
- DIAPHRAGM MASS (MMD) 7,941 g
- TOTAL MASS (MMS) 8,947 g
- BL PRODUCT 4.046 TM
- MECHANICAL Q (Qms) 3,225
- ELECTRIC Q (Qes) 0,998
- TOTAL Q (Qts) 0,762
- COMPLIANCE (CMS) 301,397u M/N
- EQUIVALENT VOLUME (VAS) 9,032 L
- FREQUENCY RESPONSE 100Hz to 17.500Hz
- RESONANCE FREQUENCY 96,918 Hz
- Le @ 10 kHz (coil inductance at 10 kHz) 0,2008 mH
- EFFECTIVE CONE AREA (SD) 0,0145 Sq.m
- CONE EXCURSION WITHOUT DISTORION (X MAX) – + 2,05 mm
- FLOW DENSITY IN THE GAP 10.000 GAUSS
Thiele-Small parameters are obtained after applying a sinusoidal level of 50hz for a period of 30 minutes. A tolerance of+ – 15% on the specified values is allowed.
MECHANICAL PARAMETERS
- NOMINAL DIAMETER 6 Inches
- FERRITE MEASURES 90 X 39 X 14mm
- COIL DIAMETER 1.1/4″
- COIL HEIGHT 6,5 mm
- COIL WIRE MATERIAL Copper
- COIL WIRE SECTION Round
- COIL SHAPE *Kaplan®
- GAP HEIGHT 4,75 mm
- HOUSING MATERIAL Steel
- FERRITE MATERIAL Barium
- WEIGHT 1,02 Kg
- VOLUME OCCUPIED ON THE CABINET 0,55 Liters
CABINETS SUGGESTION
PRODUCT DIMENSIONS
WARRANTY TERM
When all our products are produced, they undergo rigorous evaluations, in each
construction process until they are packaged, however, if any type of
abnormality is detected, when opening the package, it must be sent to one of
our authorized service stations , or directly to the factory, if there is not
an authorized technitian in your region. Each and every product must undergo a
technical evaluation so that the defect is identified and proven.
The product has a warranty of 15 (fifteen) months after the issuance of the
invoice, with the legal warranty of 90 days, provided for in article 26, item
II, of law No. 8078/90 ( Brazilian consumer protection code).
Warranty Conditions:
The product must be installed correctly, by a specialized professional, as
well as respecting the product characteristics.
The customer will NOT have the warranty when:
- Exceed the period of 15 (fifteen) months.
- Damages incurred are caused by; transport or handling accident, or humidity.
- Defects caused by improper installation.
- Malfunctions in product parts (torn cone/dust cap, bent or broken speaker housing).
- Coils burned out by excessive power or extreme distortion conditions, causing heating above 240°.
Warranty Coverage:
- Taramps guarantees its products against any defect in material or manufacturing process, provided that, at the discretion of its authorized technicians, it is found to be defective under normal conditions of use.
- The PRODUCT must contain the original label, on which its serial number is inserted.
- To use the warranty, the customer must present the invoice and the warranty term, both of which must contain the serial number on the product label.
Transport
Only products that fall under the terms of warranty coverage will have their
transportation expenses covered, otherwise, the expense will be at the
customer’s expense.
WARRANTY CERTIFICATE
- NAME: ____ _
ADDRESS:
- CITY: ____
- ZIP: __ _
- STATE: FHONE: ___ _
- DEALER: ___ _
- ADDRESS: __ _
- CITY: ____
- ZIP: __ _
- STATE: PHONE: ___ _
- INVOICE NUMBER
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>