TARAMPS SL-3K1 Free Shipping Worldwide Instruction Manual
- June 13, 2024
- TARAMPS
Table of Contents
SL-3K1 Free Shipping Worldwide
Instruction Manual
The 18-SL 3K1, was designed to reproduce the sub bass and bass, in car sound
systems and professional performance systems (bands, concerts, bars, churches,
outdoor systems, theaters, cinemas andetc.
We invite you to dive into a sound experience, where low frequencies are
harmonized with great fidelity, through velvety bass and clean timbres.
ELECTRIC PARAMETERS
| RMS POWER | 1.550 W |
|---|---|
| MUSICAL PROGRAM POWER | 3.100 W |
| NOMINAL IMPEDANCE | 4 or 8 Ohms |
| RESISTANCE (RE) | 2,9 / 6,0 ohmsNCC |
| NO (EFFICIENCY REFERENCE) | 2,500% |
| DIAPHRAGM MASS (MMD) | 166,226g |
| TOTAL MASS (MMS) | 190,519 g |
| BL PRODUCT | 25.853 TM |
| MECHANICAL Q (ams) | 9,568 |
| ELECTRIC Q (Qes) | 394 |
| TOTAL Q (Qts) | 378 |
| COMPLIANCE (CMS) | 99,008u MM |
| EQUIVALENT VOLUME (VAS) | 206,876 L |
| SENSITIVITY (@ 1W, 1 m)-Free-Air | 95,998 dB |
| FREQUENCY RESPONSE | 25 to 800 Hz |
| RESONANCE FREQUENCY | 36,6 Hz |
| EFFECTIVE CONE AREA (SD) | 0,1213 Sq.m |
| CONE EXCURSION WITHOUT DISTORTION (X MAX) | -+ 12 mm |
| FLOW DENSITY IN THE GAP | _ 10.000 GAUSS |
Thiele-Smail parameters are obtained after applying a sinusoidal level of 50hz for a period of 30 minutes. A tolerance of + – 15% on the specified values is allowed.
PRODUCT DIMENSIONS
MECHANICAL PARAMETERS
| NOMINAL DIAMETER | 18 Inches |
|---|---|
| FERRITE MEASURES | 220 x 25 mm |
| COIL DIAMETER | 4 Inches |
| COIL HEIGHT | 31 mm |
| COIL WIRE MATERIAL | Copper |
| COIL WIRE SECTION | Round |
| COIL SHAPE | *Kapton® |
| GAP HEIGHT | 14 mm |
| HOUSING MATERIAL | Aluminum |
| FERRITE MATERIAL | Barium |
| WEIGHT | 14,6 Kg |
| VOLUME OCCUPIED ON THE CABINET | 6,4 Liters |
“Kapton• registered trademark by DUPONT
CABINET SUGGESTION
MODEL| VOLUME| DUCTS| DUCTS| DUCTS| SYNTONY|
(H.P.F)| ATTENUATION
---|---|---|---|---|---|---|---
LITERS| QUANT.| DIAM.| DEPTH| | | (ACTIVE)
VENTED
BOX| 120| 4| 4″(POL)| 207 mm| 50 Hz| 45 Hz| – 24 d8/ Octave
150| 4| 4700| 295 mm| 40 Hz| 35 Hz| – 24 dB/ Octave
| | | | | |
SUGGESTIVE MEASURES *For professional lines, it is mandatory to use a cotton
or glass wool blanket Box 120 Liters
Box 150 Liters
WARRANTY TERM
When all our products are produced, they undergo rigorous evaluations, in each
construction process until they are packaged, however, if any type of
abnormality is detected, when opening the package, it must be sent to one of
our authorized service stations , or directly to the factory, if there is not
an authorized technitian in your region. Each and every product must undergo a
technical evaluation so that the defect is identified and proven.
The product has a warranty of 15 (fifteen) months after the issuance of the
invoice, with the legal warranty of 90 days, provided for in article 26, item
Il, of law No. 8078/90 ( Brazilian consumer protection code).
Warranty Conditions:
The product must be installed correctly, by a specialized professional, as
well as respecting the product characteristics.
The customer will NOT have the warranty when:
- Exceed the period of 15 (fifteen) months.
- Damages incurred are caused by; transport or handling accident, or humidity.
- Defects caused by improper installation.
- Malfunctions in product parts (torn cone/dust cap, bent or broken speaker housing).
- Coils burned out by excessive power or extreme distortion conditions, causing heating above 240°.
Warranty Coverage:
- Taramps guarantees its products against any defect in material or manufacturing process, provided that, at the discretion of its authorized technicians, itis found to be defective under normal conditions of use.
- ThePRODUCT must contain the original label, on which its serial number is inserted.
- Touse the warranty, the customer must present the invoice and the warranty term, both of which must contain the serial number on the product label.
Transport
Only products that fall under the terms of warranty coverage will have their
transportation expenses covered, otherwise, the expense will be at the
customer’s expense.
WARRANTY CERTIFICATE
Name………………
Address……………….
City………………………….Zip………………..
State……………….. Phone …………….
Dealer……………
Address………………….
City……………………………. Zip…………….
State …………………. Phone ………………….
www.taramps.com.br
Rod. Julio Budisk SP 501 s/n, – Compl. KM 30-A/SP ZIP:19.180-000 Phone Number
+55 (18) 3266-4050 National Registry(CNPJ): 23.372.795/0001-64
Note: Features, specifications and aesthetics are subject to change
without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>