Power beats2 Wireless Earbud Headphones User Guide
- June 13, 2024
- BEATS
Table of Contents
Power beats2 Wireless Earbud Headphones
Product Information
The product is a pair of wireless earbuds with a flexible earhook design for a secure and comfortable fit. It features a power/connect button for powering on/off and wireless pairing with other devices. The earbuds have adjustable ear tips and earhooks to ensure the perfect fit for the user. The product also includes a cable management clip to keep the cables organized. Charging is done through a micro USB cable, and the device has LED indicators to show the charging status.
Product Usage Instructions
- Power:
- Press the power/connect button to power on the device.
- Press the power/connect button again to power off the device.
- Wireless Pairing:
- Press and hold the power/connect button for 4 seconds to enter pairing mode.
- Placement + Fit:
- Position the earhook over the back of your ear.
- Insert the earbud into the ear canal and adjust by twisting if needed.
- Adjust the flexible earhook to securely fit around your ear.
- Choose the appropriate ear tip size for a comfortable fit.
- Cable Management:
- Adjust the cable fit by sliding the cable management clip in either direction.
- To remove the cable management clip, pull it away from the sides.
- Charging:
- Open the USB door and connect a micro USB cable to charge the device.
- A 15-minute charge provides 1 hour of playback.
- Once the LED changes from red to white, remove the USB cable and close the USB door.
- Charge Status:
- A white LED indicates normal use.
- A red LED indicates less than 1 hour of playback remaining.
- A blinking red LED indicates less than 15 minutes of playback remaining.
- RemoteTalk Control:
- Note: Functionality may vary depending on the device.
- Additional Information:
- For more information, refer to the complete user manual available at https://manual-hub.com/.
POWER
Press power/connect button to power on.
Press power/connect button to power off.
WIRELESS PAIRING
Press and hold power/connect button for 4 seconds to pair device.
Pair with device when LED is blinking.
PLACEMENT + FIT
Position earhook over the back of your ear.
Insert the earbud into the ear canal and adjust by twisting into position if the fit is not right.
Adjust flexible earhook to fit securely around the ear.
Adjust ear tip size if necessary.
CABLE MANAGEMENT
Adjust cable fit by gripping end of loop and sliding cable management clip in either direction.
Remove cable management clip by gripping clip and pulling cable away from the sides.
CHARGING
Open USB door to charge via a micro USB cable. 15 minute charge = 1hr playback.
Remove USB cable from the device once LED changes from red to white and close USB door.
CHARGE STATUS
White LED
White LED = Normal use
Red LED
Red LED = Under 1 hour of playback
Blinking Red LED
Blinking red LED = Under 15 minutes of playback
REmote Talk ™ CONTROL
iPod®, iPhone® and iPad®
**Android™, Windows® and BlackBerry®***
NEED MORE INFORMATION?
beatsbydre.com/support
Software Updates
User Guide
1-800-442-4000 6am to 7pm PST
Product Registration
Helpful Tips
- “ Android” is a trademark of Google Inc. “Windows” is a registered trademark of Microsoft Corporation in the United States and other countries. Blackberry® is the property of Research In Motion Limited and is registered and/or used in the U.S. and countries around the world. Used under license from Research In Motion Limited. “powerbeats” and “RemoteTalk” are trademarks of Beats Electronics. “iPod”, “iPhone”and iPad” are trademarks of Apple Inc., registered in the U.S. and other countries.
© 2014 Beats Electronics LLC
beatsbydre.com
facebook.com/beatsbydre
@beatsbydre
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>