Shenzhen Yuchengde Technology WF-B122 WiFi 6 Adapter User Guide

Shenzhen Yuchengde Technology WF-B122 WiFi 6 Adapter

Product Information

This is a WiFi 6 Adapter (without Driver) designed to provide high-speed wireless internet connectivity to computers. It is compatible with Windows 10 and Windows 11 operating systems. The adapter supports the latest WiFi 6 technology for enhanced performance and speed.

Product Usage Instructions

1. Step 1: Plug the adapter into the USB port on the computer.
2. Step 2: The computer control panel will open the AutoPlay function or prompt you to install the driver software. Look for “WIFI6 DRIVER” and follow the instructions to install the driver if necessary.
3. Step 3: Once the driver is installed, choose your network from the available options and enter the password to connect.

Frequently Asked Questions:

• Q: Is this Wi-Fi adapter compatible with Chromebooks/Linux/Mac OS?
  A: No, this adapter is only compatible with Windows 11/10 operating systems.

• Q: I don’t have a CD drive. How do I install the driver?
  A: You don’t need to download the driver separately. The adapter supports Plug & Play functionality, which means it will automatically install the necessary drivers when connected to your computer.

• Q: I’m unable to reach maximum speed. What should I do?
  A: To experience the full performance and speed of WiFi 6, make sure you are using it with a WiFi 6 router.

• Q: I can’t connect to WiFi or experience frequent dropouts. What could be the issue?
  A: Please try the following troubleshooting steps:

  • Check that the drivers have been installed correctly.
  • Ensure there are no strong signal interference sources near the router, such as microwave ovens, magnets, or high-voltage lines. Keep them away from these devices.
  • If you are using a USB hub or port on the front of the computer, try inserting the WiFi adapter into the USB port on the back of the computer case for a potentially better power supply.

FCC Caution:
This device complies with part 15 of the FCC Rules. It should not cause harmful interference and must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the responsible party could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restrictions.

Plug & Play Automatically

• Step 1
  Plug the adapter into the USB port on the computer.

• Step 2
  The computer control panel opens the AutoPlay function or checks “ WIFI6 DRIVER ” to install the driver software.

• Step 3
  Choose your network and enter the password.

FAQs

• Q: Is this Wi-Fi adapter compatible with Chromebooks/ Linux/Mac OS?
  A: No. It only works with Windows 11/10

• Q: I don’t have a CD drive. How do I install the driver?
  A: Plug & Play automatically, you don’t need to download the driver.

• Q: Unable to reach maximum speed.
  A: Need to use with wifi 6 router to show the performance and speed of wifi 6.

• Q: Can’t connect to wifi or drop wifi connections.
  A:

1. Check that the drivers have been installed correctly
2. Signal interference- There may be strong signal interference sources next to the router, such as microwave ovens, magnets, and high-voltage lines, please place them away from these devices.
3. Insufficient USB power supply, please try to insert the wifi adapter into the USB port on the back of the computer case.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>