AIXIN MEDICAL AX-Z2 Dental Vibrator User Manual
- June 13, 2024
- AIXIN MEDICAL
Table of Contents
AIXIN MEDICAL AX-Z2 Dental Vibrator
Product Information
The AX-Z2 Dental Vibrator by AIXIN MEDICAL is a newly designed vibrator used for duplicating or pouring plaster and agar in dental laboratories. It is designed to remove bubbles in moulds, making the fillings homogeneous and dense. This machine is an essential equipment for dental technicians. It features adjustable and limitless vibration amplitude, providing optimal control for various applications.
Specifications
| Power supply voltage | Power | Maximum load | Dimensions |
|---|---|---|---|
| Diagram: 4 | 1 | 2 | 3 |
Diagram
Product Usage Instructions
- Unpack the package and ensure all accessories are present. Read the user manual carefully before using it.
- Check the working platform of the machine and ensure it is laid flat. Make sure the vibration regulator is not loosened. Adjust the regulator to the minimum by turning it anti-clockwise.
- Connect the machine to a power supply. The power indicator should turn on. Turn on the power switch to start the vibration.
- Adjust the regulator to the required vibration amplitude.
- Place the mould on the platform and hold it with both hands, ready to be filled.
- After filling the mould, turn off the power.
- The machine can work continuously for four hours.
Cautions
- The storage temperature should be between -20°C and 40°C. The machine must be kept in a dry environment, and the temperature should not be too high.
- Do not hit or crash the machine, and avoid exposing it to water.
- If the machine does not work, check if the power supply is connected. If the power indicator is normal, open the black rubber cover and adjust the four screws in the front for the vibration amplitude.
Accessories:
| Manual | Power cord | Fuse tube (0.5A) |
|---|---|---|
| 1 | 1 | 2 |
Description
- The AX-Z2 vibrator is used for duplicating or pouring plaster and agar.
- It can remove bubbles in molds, and make the fillings homogeneous and dense.
- It is a necessary equipment for dental technicians.
- This machine is a newly designed vibrator with adjustable and limitless vibration amplitude.
Specifications
| Power supply voltage | AC 220V / 110V 50HZ / 60 HZ±10% |
|---|---|
| Power | 100W |
| Maximum load | ≤2kg |
| Dimensions | 22×18×10cm³ |
Diagram
- Power indicator
- Power switch
- Vibration regulator
- Working platform
Instructions
- Unpack the package, and check if all the accessories are inside. Read this manual carefully before using it.
- Check the working platform of the machine, make sure it is laid flat and the regulator is not loosened. Adjust the regulator to the minimum by turning it anti-clockwise.
- Connect the machine to a power supply, and the power indicator is on. Turn on the power switch and the machine starts vibrating.
- Adjust the regulator to the required vibration amplitude.
- Put the mould on the platform and hold it with both hands, and the mould is ready to be filled. After filling the mould, turn off the power.
- The machine can work for four hours continuously.
Cautions:
- The storage temperature should be between -20 and 40℃, and the machine must be kept in a dry environment, the temperature must not be too high.
- Do not hit or crash the machine, and do not expose the machine to water.
- If the machine does not work, check if the power supply is connected. If the power indicator is normal, open the black rubber cover and adjust the four screws in the front for the vibration amplitude.
Accessories
| Manual | 1 |
|---|---|
| Power cord | 1 |
| Fuse tube (0.5A) | 2 |
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>