AMP Research 75313-01A BedStep Instruction Manual

: June 13, 2024
: AMP RESEARCH

Table of Contents

Package Content
Tools Requirement
Assembly Instruction
OPERATION
MAINTENANCE TIPS
LIMITED WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**AMP Research 75313-01A BedStep Instruction Manual

**

Package Content

Tools Requirement

3/16” T-Handle Hex Key
Torque wrench
13mm Box Wrench
6” Wobble Ext
3” Extension
13, 15, 21mm 21mm (Deep Well)
T-25

Assembly Instruction

Assemble bracket as shown below. Do not tighten!
Secure linkage in a Vice.

Torque Bolts to 33ft-lbs /44Nm.

Torque Bolts to 16ft-lbs / 22Nm.

Assembly Instruction

1. Set Bracket assembly into position over key hole and slide over, flush to frame rail. Reinsert nut from step 4, and then tighten all nuts, making sure bracket remains flush and square. Do not Torque!
  NOTE: Wobble extension recommended.
Note: Verify bumper alignment before torquing bolts.
Insert PT Screws into corresponding holes and torque to 6 ft-lbs / 8 N.m.
NOTE: Overtightening may damage step pad.

Thank you for your recent AMP Research Purchase.

REGISTER YOUR PRODUCT TODAY FOR FASTER SERVICE & PRODUCT UPDATES

Please visit:
www.amp-research.com/productregistration
or scan the QR Code

Product Registration Benefits:

Ensure we have your purchase receipt and product info in our system which is required for warranty
Faster and easier access to customer service and tech support in the unlikely event you need warranty or product support
Registration helps us keep you up to date on product information and offers

To view other Amp Research products that may be offered for your vehicle.
Please visit: www.amp-research.com

Congratulations on the purchase of your AMP RESEARCH BedStep®

Here’s what you should know…

OPERATION

The AMP Research BedStep® is foot operated and deploys and retracts with a nudge of your foot.
To deploy, press down using your left foot, on the forward outside corner of the step pad.
To retract, gently kick the underside of the step pad.
Max Load Capacity: 300lbs.
Always use appropriate hand holds when stepping up to or down from your truck’s cargo bed.

MAINTENANCE TIPS

The step pad surface and linkage arms can be washed with mild soap and water using a soft brush or sponge to dislodge any mud, dirt or accumulated road grime. Rinse with fresh water.

To prevent slipping, avoid applying waxes, lubricants or protectants like Armor All® to the step surface.

ATTENTION!

BEDSTEP SHOULD ALWAYS BE STOWED IN THE RETRACTED POSITION WHEN DRIVING.

LIMITED WARRANTY

AMP RESEARCH warrants product to be free from defects in material and workmanship, for terms specified below, provided there has been normal use and proper maintenance. All remedies under this warranty are limited to the repair or replacement of any item found by the factory to be defective within the time period specified.

If you have a warranty claim, first you must call our factory at the number below for instructions. You must retain proof of purchase and submit a copy with any items returned for warranty work. Upon completion of warranty work, if any, we will return the repaired or replaced item or items to you freight prepaid. Damage to our products caused by accidents, fire, vandalism, negligence, misinstallation, misuse, Acts of God, or by defective parts not manufactured by us, is not covered under this warranty.

THE WARRANTY TIME PERIOD IS AS FOLLOWS: THREE YEARS FROM DATE OF PURCHASE. ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE CREATED HEREBY ARE LIMITED IN DURATION TO THE SAME DURATION AND SCOPE AS THE EXPRESS WRITTEN WARRANTY. OUR COMPANY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGE.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.

FOR WARRANTY ISSUES WITH THIS PRODUCT PLEASE CALL AMP RESEARCH CUSTOMER SERVICE 1-888-983-2204

WARNING

Be sure to read and precisely follow the provided instructions when installing this product. Failure to do so could place the vehicle occupants in a potentially dangerous situation. After installing or reinstalling, re-check to insure that the product is properly installed.